BEGA 71338 Cylindrical Shield Instruction Manual
- June 11, 2024
- BEGA
Table of Contents
BEGA 71338 Cylindrical Shield
Specifications
- Material: Stainless steel
- Weight: 0.5 kg
Product Description
The push-on shield is designed for the lateral shielding of stray light. It is
made of high-quality stainless steel, ensuring durability and protection
against external elements.
Safety
It is important to note that the manufacturer does not assume liability for
any damage resulting from improper use or installation. Any modifications done
to the luminaire should be carried out by a qualified individual, who will
then be considered the responsible party for those modifications.
Installation
- Using a 3mm hexagon socket wrench, loosen the screw on the shield.
- Insert the shield into the designated groove on the floodlight housing.
- Align the shield as needed to ensure proper shielding of stray light.
- Tighten the screw securely to hold the shield in place.
Product Usage
Once the shield is correctly installed, it will help in minimizing stray light
and improve the overall lighting efficiency of the luminaire. Ensure that the
shield is regularly checked for any signs of damage or misalignment to
maintain its effectiveness.
FAQ:
Q: Can the shield be painted to match the color of the luminaire?
A: It is not recommended to paint the shield as it may affect its performance.
The stainless steel construction is chosen for its durability and resistance
to corrosion.
Cylindrical shield
Instructions for use
Application
Push-on shield for the lateral shielding of stray light.
Suitable for BEGA performance floodlights
- 85 127 · 85 133 · 85 139 · 85 144 · 85 146
- 85 148 · 85 151 · 85 156 · 85 161 · 85 166
- 85 168 · 85 170 · 85 232 · 85 233 · 85 238
- 85 239
Product Description
- Surround made of stainless steel
- Steel grade no. 1.4301
- Colour graphite or silver
- Conformity mark
- Weight: 0.5 kg
Safety
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
Undo the hexagon socket screw
(wrench size 3 mm) and insert the shield into the groove in the floodlight
housing.
Align the shield and secure it in place.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>