Beldray FLORIANA Electric Stove Suite User Guide
- June 7, 2024
- Beldray
Table of Contents
Beldray FLORIANA Electric Stove Suite
Please read all of the instructions carefully and retain for future reference.
Safety lnstructions:
When using electrical products, basic safety precautions should always be
followed. Check that the voltage indicated on the rating plate corresponds
with that of the local network before connecting the product to the mains
power supply. Children younger than 3 years old should be kept away from the
product unless continuously supervised.
Children aged from 3 years and less than 8 years should not plug in, regulate
or clean the product or perform user maintenance. Children aged from 8 years
and people with.
reduced physical, sensory or mental capabilities or lack of experience and
knowledge can use this product, only if it has been installed in its intended
operating position and they have been given supervision or instruction
concerning use of the product in a safe way and understand the hazards
involved. Children should not perform cleaning or user maintenance unless they
are older than 8 years and supervised. This is not a toy – children should be
supervised to make sure they do not play with the product. Always unplug the
product and allow to cool
fully after use and before any Cleaning or maintenance. Normal voltage 1s
still present in this product as long as the product is connected to the
electrical source.
This product contains no user serviceable parts. If the power supply cord,
plug or any part of the product is malfunctioning or if it has been dropped or
damaged, only a qualified electrician should carry out repairs. Improper
repairs may place the user at risk of harm. Keep the product and its power
supply cord out of the reach of children and away from heat or sharp edges
that could cause damage. This includes any parts of the product that may
become hot during use and other heat emitting products.
Keep furniture, curtains and other flammable material at least 1 metre away
from the product.
- Do not run the supply cord under carpets, rugs etc. or anywhere where it may present a trip hazard.
- Do not immerse the product or plug in water or any other liquid.
- Do not operate the product with wet hands. Do not leave the product unattended whilst connected to the mains power supply or when in use.
- Do not remove from the mains power supply by pulling the cord; switch off and remove the plug by hand. Do not use this product for extended periods. of time.
- Do not leave the product operating overnight. Do not use the product for anything other than its intended use.
- Do not cover this product.
- Do not block the air intake of the product; place in an open, well- ventilted space and install according to the 1nstruct1ons provided. Do not use this product outdoors.
- Do not attempt to move the product whilst it is in use.
- Do not put objects into any of the openings. Do not use the product with a programmer, timer, separate remote-control system or any other device that will switch the product on automatically other than that supplied with the product, as there is a risk of fire if the heater is covered or positioned incorrectly.
- Do not clean the product with abrasive chemicals or materials such as scourers, as they may damage the product. This includes insecticide and chemical solvents.
- The product should be used on a stable, heat-resistant surface.
- The product must not be located immediately below or next to a mains power supply. Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to the user and damage to the product.
- Use of an extension cord with the product is not recommended.
- This product is intended for domestic use only. Caution: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
- Hot surface – do not touch the hot section or heating components of the product.
Warning: In order to avoid overheating, do not cover the product.
Do not use this product in small rooms whilst occupied by persons incapable of leaving the room on their own, unless constant supervision is provided.
Care and Maintenance
Always unplug the electric stove from the mains power supply and allow it to cool _ sufficiently before performing any cleaning or maintenance. Wipe the exterior of the electric stove with a soft, damp cloth and allow to dry thoroughly. Do not use harsh or abrasive cleaning solvents or scourers, as these may damage the finish of the electric stove and its glass door. Check regularly for any blockages on the vent, to prevent the thermal cut-out device from operating. Do not immerse the electric stove in water or any other liquid.
Thermal Cut-out Device
This product is fitted with a thermal safety cut-out device, built in to
prevent it from overheating. Should the product start to overheat, the thermal
safety cut-out system will automatically operate and the heat settings will
switch off. If this happens:
STEP 1: Switch off the product by setting the on/off switch to (o).
STEP 2: Check that the product is unplugged from the mains power supply
and allow it to cool for approx. 15 minutes.
STEP 3: Clear any blockages present on the vent, being careful not to
damage the product.
STEP 4: Plug in and switch on the product at the mains power supply.
Caution: In order to avoid a hazard, due to inadvertent resetting of the thermal cut-out, this product must not be supplied through an external switching device such as a timer or connected to a circuit that is regularly switched on and off by the utility.
Description of Parts
- Floriana Electric Stove Suite main body
- Glass door
- Vent
- Control panel
- On/off switch
- Heat setting I switch
- Heat setting II switch
- Adjustable thermostat
- Leg(s)
Installation Guide
Do not connect the electric stove to the mains power supply until all of the
instruction have been read, fully understood and the electric stove has been
properly and securely fitted.
The minimum safe distances must be observed.
Note: The electric stove must be operated on a flat, stable and heat- resistant surface.
The fixing pack contains small items, which should be kept away from young children. It is suggested that all of the fixing pack contents are placed into a container, to reduce the risk of losing any small pieces.
Before First Use
STEP 1: Check that there is no damage to the electric stove
STEP 2: Position the electric stove on a flat, stable, heat resistant
surface in an open space, at least 1 metre away from furniture, curtains or
any other flammable materials. If placing the electric stove in an alcove,
make sure that there is at least 150mm of space on all sides, to allow for
good air circulation.
STEP 3: Check that the vent is not blocked. Keep hearthrugs and other
soft furnishings away from the front of the electric stove, as they could
obstruct the free-flow of hot air from the fan and damage both the soft
furnishings and the electric stove.
Note: The electric stove must not be located over a mains power socket.
The mains power socket must always be accessible in order to disconnect the
electric stove from the mains power supply for cleaning or maintenance.
Caution: The electric stove should be free from noticeable vibrations
whilst it is in operation; vibrations may cause damage to the bulb. Turn off
the electric stove oefore moving or attempting any maintenance or cleaning.
Warning: Do not connect the electric stove to the mains power supply
until all of the instructions have been read, fully understood and the
electric stove has been properly and securely fitted.
Using the Floriana Electric Stove Suite
STEP 1: Plug in and switch on the electric stove at the mains power
supply.
STEP 2: To turn on the electric stove, press the on/off switch on the
control panel.
STEP 3: Select the desired heat output by pressing the relevant heat
setting switch: To operate the electric stove on a low heat setting (900W),
press the heat setting I switch; press it again to switch it off. Press the
heat setting 11 switch to operate the electric stove on a high heat setting
(1800W); press it again to switch it off.
STEP 4: The adjustable thermostat can be used to regulate the room
temperature. Turn it in a clockwise direction to increase the temperature of
the room. To reduce the room temperature, turn the adjustable thermostat in an
anticlockwise direction.
STEP 5: Switch off the electric stove using the on/off switch, so that it
is in the (o) position.
Note: The electric stove must be turned on before any of the heat settings will work. The higher heat setting (1800W) will only operate if both heat setting switches are turned on. When using the electric stove for the first time, a slight odour may be emitted. This is normal and will soon subside. Allow for sufficient ventilation around the electric stove. The adjustable thermostat needs to be at a temperature higher than the room temperature for the heat to work.
Specifications
- Product Code: EH3215
- Voltage: 220-240 V – 50 Hz
- Output: 1800 W
lf this product does not reach you in an acceptable condition please contact
our Customer Services Department at www.beldray.com.
Please have your delivery note to hand as details
from it will be required. If you wish to return this product, please return it
to the retailer from where it was purchased with your receipt (subject to
their terms and conditions). Go to www.beldray.com
and search EH3215 to access the instruction manual for your product. *To be
eligible for the extended guarantee, go to
www.beldray.com and register your product within 30
days of purchase.
The crossed out wheelie bin symbol on this item indicates that this appliance
needs to be disposed of in an environmentally friendly way when it becomes of
no further use or has worn out. Contact your local authority for details of
where to take the item for recycling. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>