Beldray 876876 Stick Vacu Two in One Vacuum Cleaner Instruction Manual

June 5, 2024
Beldray

STICK VAC TWO IN ONE
QUICK START GUIDE.
Find us on in
www.facebook.com/Beldray
FULL INSTRUCTION MANUAL AT
https://www.beldray.com/manuals.html
PRODUCT CODE: BEL0770N-150 

Please retain instructions for future reference.

Safety Instructions

When using electrical appliances, basic safety precautions should always be followed.
Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the main power supply.
Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance, only if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children should be supervised to ensure that they do not play with the appliance.
Unless they are older than 8 and supervised, children should not perform cleaning or user maintenance.
This appliance contains no user-serviceable parts.
If the power supply cord, plug, or any part of the appliance is malfunctioning or if it has been dropped or damaged, do not use it.
Only a qualified electrician should carry out repairs.
Improper repairs may place the user at risk of harm.
Do not remove from the mains power supply by pulling the cord; switch off and remove the plug by hand.
Do not pull or carry the appliance by its power supply cord.
Do not use the appliance for anything other than its intended use.
Do not use this appliance if any of the openings are blocked.
Take care when equipping accessories with rotating parts as this could cause entrapment.
Switch off the appliance, disconnect it from the mains power supply and allow it to cool fully before changing or fitting accessories and before cleaning or user maintenance.
Use of an extension cord with the appliance is not recommended.
This appliance should not be operated by means of an external timer or separate remote control system.
This appliance is intended for domestic use only. It should not be used for commercial purposes.

Thermal Cut-out Device

If the dust container and HEPA filter are not cleaned on a regular basis, the vacuum cleaner may overheat, which will cause the thermal cut-out device to activate due to the restricted flow of air around the unit. If the vacuum cleaner cuts out, press the power switch to turn it off and unplug it from the mains power supply.
Proceed to empty the dust container, clean all of the filters and allow the vacuum cleaner to cool for approx. 1 hour.
Dos and Don’ts
Do:
Check that the HEPA filter is kept clear of obstruction.
Make sure that the dust container and HEPA filter are cleaned regularly.
Don’t:
Use the vacuum cleaner without the HEPA filter or dust container in position.
Use the vacuum cleaner to pick up flammable liquid, matches, cigarette ends, hot ashes, or any hot, burning, or smoking objects.
Use the vacuum cleaner to pick up water or any other liquid, as this poses a risk of an electric shock.

Description of Parts

Beldray 876876 Stick Vacu Two in One Vacuum Cleaner -

1. Stick Vac Two in One
2. Quick-release cord hooks
3. Extension pole handle
4. Extension pole
5. The upright vacuum handles
6. Locking clip
7. Handheld
8. Upper cord hook
9. Lower cord hook the main unit| 10. Power switch
11. Dust container release button
12. Dust container
13. HEPA filter
14. Mesh filter cover
15. Air inlet
16. Floor head vacuum handles
17. Crevice tool 18. Brush tool
---|---

Instructions for Use

Before First Use
Before using the vacuum cleaner for the first time, clean it with a soft, damp cloth and dry thoroughly.
Do not immerse the vacuum cleaner in water or any other liquid.
Assembling the Upright Vacuum Handle
STEP 1: Align the tab on the extension pole with the indent on the extension pole handle.
STEP 2: Press the tab inwards whilst pushing the pole into position until the tab clicks into place.
Using as an Upright Vacuum Cleaner
STEP 1: Align the groove on the upright vacuum handle with the indent on the handheld unit.
STEP 2: Insert the upright vacuum handle into the vacuum cleaner’s main body until the locking clip secures it into place.
STEP 3: Place the floor head onto the floor and slot the air inlet onto the floor head.
STEP 4: Plug in and switch on the vacuum cleaner at the mains power supply.
STEP 5: Turn it on by pressing the power switch.
STEP 6: Press the power switch once more to turn off the vacuum cleaner.
Using as a Handheld Vacuum Cleaner
STEP 1: Once the vacuum cleaner is turned off, press the locking clip and then carefully pull the extension handle away from the vacuum cleaner’s main body.
STEP 2: Remove the floor head by pulling it away from the air inlet.
STEP 3: Select the attachment to be used and place it securely onto the air inlet.
STEP 4: Once the attachment is secure, plug the vacuum cleaner into the mains power supply and turn it on by pressing the power switch.
STEP 5: Turn off the vacuum cleaner by pressing the power switch once more.
The dust container and HEPA filter need to be emptied and cleaned regularly to preserve suction, prevent overheating, and prolong the life of -the vacuum cleaner.

Storage

The vacuum cleaner should be cool, clean, and dry before storing in a cool, dry place. Wrap the power cord around the quick release cord hook and the lower cord hook, making sure that the quick release cord hook is in the upright position. To unwrap the power cord, twist the quick release cord hook 180 ° in a clockwise direction to release the cord from the stored position.

Specifications

Product code: BEL0770N-150
Input: 220-240 V – 50-60 Hz
Output: 600 W

If this product does not reach you in an acceptable condition please contact our Customer Services Department at www.beldray.com.
Please have your delivery note to hand as details from it will be required.
If you wish to return this product, please return it to the retailer from where it was purchased with your receipt (subject to their terms and conditions).
Go to https://www.beldray.com/manuals.html and search BEL0770N-150 to access the instruction manual for your product.
*To be eligible for the extended guarantee, go to
https://guarantee.upgsscorn/beldray/ and register your product within 30 days of purchase.
The crossed-out wheelie bin symbol on this item indicates that this appliance needs to be disposed of in an environmentally friendly way when it becomes of no further use or has worn out. Contact your local authority for details of where to take the item for recycling.

Manufactured by:
UP Global Sourcing UK Ltd.,
The UK. Manchester 019 ODD.
Germany. 51149 ‘Coln.
MADE IN CHINA. www.beldray.com
CD270921/MD000000\V1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals