BEL0931 34 Percent Off Beldray 2800W Steam Iron User Guide

June 5, 2024
Beldray

2800 WATT
RAPID GLIDE PRO
QUICK START GUIDE

Find us on

www.facebook.com/Beldray

Manufactured by:
UP Global Sourcing UK Ltd.,
Victoria Street, Manchester OL9 ODD. UK.

MADE IN CHINA.
www.beldray.com

The crossed-out wheelie bin symbol on this item indicates that this appliance needs to be disposed of in an environmentally friendly way when it becomes of no further use or has worn out.
Contact your local authority for details of where to take the item for recycling.

CD290420/MD000000/V1

Description of Parts

1. 2800 W Rapid Glide Pro
2. Temperature control dial
3. Indicator light
4. Steam control switch
5. Steam burst button
6. Water spray button
7. Self-clean button
8. Spray nozzle| 9. Water tank
10. Water tank cap
11. Max. fill mark
12. Easy-grip handle
13. Ceramic soleplate
14. Cord guard
15. Heel rest
16. Measuring jug
---|---

Please read all of the instructions carefully and retain them for future reference.

Safety Instructions

When using electrical appliances, basic safety precautions should always be followed. Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the main power supply. Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance, only if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children should be supervised to ensure that they do not play with the appliance. Unless they are older than 8 and supervised, children should not perform cleaning or user maintenance. This appliance contains no user- serviceable parts. If the power supply cord, plug or any Dart of the appliance is malfunctioning or if it nas been dropped or damaged, do not use. Only a qualified electrician should carry out repairs. Improper repairs may place the user at risk of harm. Keep the appliance out of the reach of children when it is switched on or cooling down. Do not leave the appliance unattended whilst connected to the main power supply. Do not remove the appliance from the mains power supply by pulling the cord; switch it off and remove the plug by hand. Do not use the appliance for anything other than its intended use. Do not touch any sections of the appliance that may become hot during use, as this could cause injury. Do not direct steam at people or animals or towards equipment containing electrical components, such as the interior of ovens. Always unplug the appliance after use and allow to cool fully before any cleaning or maintenance or storing away. This appliance must only be used and rested on a stable surface. Use of an extension cord with the appliance is not recommended. This appliance should not be operated by means of an external timer or separate remote control system. This appliance is intended for domestic use only. It should not be used for commercial purposes.

Caution: The appliance emits very hot steam; always exercise extreme caution during use.
** Hot surface – do not touch the hot section or heating components of the appliance.
Warning:** Danger of scalding.
Keep the appliance away from flammable materials.

Care and Maintenance

Before attempting any cleaning or maintenance, always unplug the iron from the mains power supply, drain the water tank and allow it to cool sufficiently.

To remove any build-up around the steam holes, use a cotton wool tip dampened with methylated spirits. Wipe off the methylated spirits with a soft damp cloth and dry thoroughly.

Instructions for Use Before First Use

Before connecting to the mains power supply, wipe the exterior surface of the iron with a soft, damp cloth and dry thoroughly. To remove any impurities that may have occurred during the manufacturing process, test the iron on an old piece of cloth, making sure that it is on the highest temperature setting suitable for the material.
STEP 1: Plugin and switch on the iron. Place the iron onto the cloth and then press the steam burst button.
STEP 2: Repeat this 2-3 times, waiting approx. 5 seconds in-between. Do not immerse the iron in water or any other liquid.

Note: When using the iron for the first time, a slight odor and a small amount of smoke may be emitted. This is normal and will soon subside. Allow for sufficient ventilation around the iron when it is in use.

Filling the Water Tank

Caution: Do not fill the water tank past the max. fill mark; it is best to check the water level when the iron is on the heel rest.
Warning: Never add descaling, aromatic, alcoholic or detergent products to the water tank, as this could cause damage to the iron or injury to the user.

Using the 2800 W Rapid Glide Pro
Ironing with Steam

The steam settings are ideal for removing creases from fabrics such as cotton and linen with ease.

STEP 1: Fill the water tank.
STEP 2: Plugin and switch on the iron.
STEP 3: Rotate the temperature control dial in a clockwise direction until the desired heat setting is reached. The indicator light will illuminate to signal that the iron is heating up; this will switch off once the iron is ready to use. The iron will only heat up when the temperature control dial is on at least the 1-dot setting.
STEP 4: Slide the steam control switch to the on position. The steam setting can be switched off at any time by sliding the steam control switch to the off position.

STEP 5: After use, rotate the temperature control dial to the ‘Min’ position and then switch off and unplug the iron from the mains power supply. Allow cooling thoroughly.

Note: Allow the iron to reach the desired heat setting before use; not doing so may cause water to drip from the soleplate.
Warning: Never leave the ceramic soleplate resting on the fabric for longer than 15 seconds.

Ironing without Steam
For removing creases from more sensitive fabrics, iron without steam.

STEP 1: Slide the steam control switch to the off position.
STEP 2: Plugin and switch on the iron
STEP 3: Rotate the temperature control dial until the desired heat setting is selected.
STEP 4: Test the iron on a small area of the fabric to check that the selected temperature is suitable; adjust if necessary.
STEP 5: After use, rotate the temperature control dial to the ‘Min.’ position. Switch off and unplug the iron from the mains power supply and allow to cool thoroughly.

Steam Burst Function
For creases that are stubborn and difficult to remove, use the steam control switch to select the desired steam setting; if necessary, press the steam burst button for extra steam. Wait approx. 5 seconds in-between each burst to prevent any water from leaking out from the steam holes.

Vertical Steam Ironing
The steam burst button can also be used to vertically steam curtains and other hanging garments.

STEP 1: Hang up the item to be vertically steamed.
STEP 2: Slide the steam control switch to the off position.
STEP 3: Fill the water tank.
STEP 4: Plugin and switch on the iron.
STEP 5: Rotate the temperature control dial until the desired heat setting is selected; the higher the temperature, the more powerful the steam.
STEP 6: Hold the iron approx. 15 cm away from the item and press the steam burst button to remove any creases, waiting approx. 5 seconds in between each burst

Water Spray Function
The water spray function can be used to help to remove stubborn creases on heavier fabrics. It can also be used when dry ironing delicate fabrics that cannot be steam-ironed.
To use the water spray function, hold the iron over the area to be ironed and then press the water spray button.

Self-clean Function
The self-clean function removes limescale and impurities from within the ceramic soleplate.
It is recommended to use this function on a fortnightly basis or more often if the iron is used in a hard water area. For further details please see the online instruction manual.

Storage
Check that the iron is cool and dry and that the water tank is empty before storing in a cool, dry place.
Wrap the cord loosely around the iron; never wrap it tightly as this could cause damage.

Specifications

Product code: BEL0931
Input: 220-240 V – 50-60 Hz
Output: 2350-2800 W
Water tank capacity: 400 ml

If this product does not reach you in an acceptable condition please contact our Customer Services Department at www.beldray.com . Please have your delivery note to hand as details from it will be required. If you wish to return this product, please return it to the retailer from where it was purchased with your receipt (subject to their terms and conditions). Go to www.beldray.com and search BEL0931 to access the instruction manual for your product.

*To be eligible for the extended guarantee, go to www.beldray.com and register your product within 30 days of purchase.

ULTIMATE PRODUCTS HOME OF BRANDS

Artworker:
Date:
Project Name:
Type of Artwork:
Size:
Software Used:
Typefaces:| Jennifer Dodd
11/5/2020
EEF200354 UPG BEL0931 QSG
Quick Start Guide
A4 Folding Leaflet Double-sided
Indesign CC20
Avenir Next
---|---

Manchester
OL9 ODD
United Kingdom
www.upgs.com
t +44 (0) 161 627 1400
f: +44 (0) 161 628 2126
hk: +852 6681 9752
cn: +86 1 3417586804

Artwork Version 2
Artwork Scale 1:1
©2020 UP Global Sourcing. All designs, images, and artwork are the copyright of UP Global Sourcing. No copying, alterations, or amendments to the artwork, or design can be undertaken without prior written permission of UP Global Sourcing.
Any costs incurred as a result of unauthorized amendments will be recovered from the supplier responsible.

DO NOT PRINT THIS PAGE ARTWORK REFERENCE ONLY

Documents / Resources

| Beldray BEL0931 34 Percent Off Beldray 2800W Steam Iron [pdf] User Guide
BEL0931, 34 Percent Off Beldray 2800W Steam Iron
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals