FeinTech NLG00165 Multiple USB Charger 4 Port Charging Station Instructions
- June 3, 2024
- FeinTech
Table of Contents
FeinTech NLG00165 Multiple USB Charger 4 Port Charging Station
Intended use
The USB-C charger is used to charge batteries in mobile end devices that can be connected to the USB socket via a charging cable, e.g. mobile phones or tablet computers.
Safety instructions
- Check the unit for external damage before each use. Do not operate it if it is damaged.
- Children under 8 years of age and persons with reduced physical, mental or sensory capabilities should only use the device under supervision.
- Only use USB charging cables that are suitable for high charging currents of3A. Unsuitable charging cables may burn out or cause malfunction.
- Do not expose the unit to heat or direct sunlight. The unit and connected devices may heat up during charging. Do not cover either.
- Donot operate theunitnear nakedflames.
- Do not use the charger in high humidity (e.g. in the bathroom) or where there is a lot of dust
- Do not use the unit immediately after it has been transported from a cold environment to a warm one. Moisture may have formed inside due to condensation.
- Do not open the unit;there are no components inside that require maintenance.
- Do not continue to operate the unit ifit malfunctions or smells. Unplug it immediately and contacttheseller orFeinTech.
Disposal & CE declaration
Think about protecting the environment. Used electrical and electronic equipment must not be disposed of with household waste. The appliance contains valuable raw materials that can be reused. Therefore, hand in the appliance for disposal at an appropriate collection point. The product complies with the legal requirements, in particularthe Electrical and Electronic Equipment Act, the REACH Regulation EC 19{)7/2006, and the EU Directives 2014/35/EC LVD and 2014/30/EC EMC.
| Model identifier | KYTD65W01 |
|---|---|
| Input voltage | 230V |
| Input AC frequency | 50Hz |
| Output voltage | 12VDC(USB-C2) |
| Uutputcurrent | 1,67A |
| Output power | 20W |
| Average efficiencyin operation | 89,49% |
| Powerconsumptionatnoload | 0,21W |
Technical data
- Input:100-240V50/60 Hz 0,65 A
- Outputs: USB-C1, USB-C2, USB-A1, USB-A2
- USB-C1 (USB Power Delivery): 5V 3A.9V 3A 12V 3A 15V 3A 20V 2.25A
- USB-C2: 5V 3A 9V 2.2A 12V 1.67A
- USB-A1: 5V 2A
- USB-A2: 5V 3A 9V 2A 12V 1.5A
- Combined USB-C1+USB-A1:
- USB-C1: 5V 3A 9V 3A 12V 2.5A 15V 2A 20V 1.5A
- USB-A1: 5V 2A
- Combined USB-C2 +USB-A2:5V 3A
- Total power: max. 65 W
- Standard: USB Power Delivery 3.0/USB PD
Information according to REGULATION (EU) 2019/1782
Spreewald Kommunikationstechnik GmbH HR B 1107 Cottbus Radensdorfer Hauptstr. 45 a, 15907 Liibben, Germany
Fein Tech is a registered trademark of Spreewald Kommunikationstechnik GmbH,
Radensdorfer Hauptstr. 45 a,
15907 Lubben (Spreewald), Germany
www.feintech.eu – +49 3546 239 8855-
info@feintech.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>