FeinTech NLG00800 Dual USB Charger User Manual

June 8, 2024
FeinTech

FeinTech NLG00800 Dual USB Charger

Intended use

The USB-C charger is used to charge batteries in mobile end devices that can be connected to the USB-A or USB-C socket via a charging cable, e.g. mobile phones or tablet computers.

Safety instructions

  • Check the unit for external damage before each use. Do not operate it if it is damaged.
  • Children under 8 years of age and persons with reduced physical, mental or sensory capabilities should only use the device under supervision.
  • Only use USB charging cables that are suitable for high charging currents of 3A. Unsuitable charging cables may burn out or cause malfunction.
  • Do not expose the unit to heat or direct sunlight. The unit and connected devices may heat up during charging. Do not cover either.
  • Do not operate the unit near naked flames.
  • Do not use the charger in high humidity (e.g. in the bathroom) or where there is a lot of dust.
  • Do not use the unit immediately after it has been transported from a cold environment to a warm one. Moisture may have formed inside due to condensation.
  • Do not open the unit; there are no components inside that require maintenance.
  • Do not continue to operate the unit if it malfunctions or smells. Unplug it immediately and contact the seller or FeinTech.

Think about protecting the environment. Used electrical and electronic equipment must not be disposed of with household waste. The appliance contains valuable raw materials that can be reused. Therefore, hand in the appliance for disposal at an appropriate collection point.

The product complies with the legal requirements, in particular the Electrical and Electronic Equipment Act, the REACH Regulation EC 1907/2006, and the EU Directives 2014/35/EC LVD and 2014/30/EC EMC.
A formal CE declaration is available for download at https://feintech.eu/ce

Information according to REGULATION (EU) 2019/1782

Spreewald Kommunikationstechnik GmbH
HR B 1107 Cottbus
Radensdorfer Hauptstr. 45 a, 15907 Lübben, Germany

Technical data

Model identifier KYTW18W08AC
Input voltage 100-240 V
Input AC frequency 50/60 Hz
Output voltage 5V DC
Output current 3A
Output power 15W
Average efficiency in operation 85,27 %
Power consumption at no load 0,09W

Input: 100–240V ~ 50/60 Hz 0,5 A
Output USB-A: DC 5V 3A | 9V 2A | 12V 1,5A
Output USB-C: DC 5V 3A | 9V 2A | 12V 1,5A
Outputs USB-A +USB-C: DC 5V 3A

FeinTech is a registered Trademark of Spreewald Kommunikationstechnik
GmbH, Radensdorfer Hauptstr. 45 a, 15907 Lübben (Spreewald), Germany
www.feintech.eu
• +49 3546 239 8855
info@feintech.eu

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FeinTech User Manuals

Related Manuals