FeinTech SW211 HDMI 2.1 Switch 2× 1 bi Directional Instruction Manual
- June 12, 2024
- FeinTech
Table of Contents
FeinTech SW211 HDMI 2.1 Switch 2× 1 bi Directional
Product Information
The SW211 is a bi-directional HDMI switch that allows for the alternating operation of 2 feed players on one display or 2 displays on one HDMI source. It features a switch button for easy switching between the two connections and comes with an integrated HDMI cable for convenient setup. The power supply is provided through the HDMI source.
Features
- Supported HDMI 2.1 features: ALLM, VRR, QFT
- Maximum data rate: 48 Gbps
- Maximum video format: 4K 120Hz YUV 4:4:4 12-bit or 8K 60Hz YUV
Safety Instructions
- Do not cover the housing or install the device in a way that may cause overheating.
- Avoid placing the device near heat sources, fire, water, or moisture.
- Do not place heavy objects on the unit or the connecting cables.
- Do not open or drill holes in the housing.
- Clean the surface of the device only with a soft, dry cloth. Do not use cleaning agents, petrol, or similar substances.
Product Usage Instructions
Installation and Operation
a) 2 HDMI feeders and 1 display
- Connect the HDMI outputs of two devices to HDMI 1 and HDMI 2 on the switch.
- Plug the built-in HDMI cable into the HDMI input of your TV, monitor, AV receiver, or video projector.
b) 1 HDMI source and 2 displays
- Plug the built-in HDMI cable into the HDMI output of your source player.
- Connect HDMI 1 and HDMI 2 to the HDMI inputs of your TV, monitor, AV receiver, or video projector.
- First, switch on the HDMI sink (e.g., TV), and then the HDMI source.
- To switch between the two connections, press the switch button.
Connections & Display
The SW211 has two HDMI sockets:
- Signal inputs for 2 HDMI players and one display.
- Signal outputs for one HDMI player and 2 displays.
- The signal direction changes depending on the use.
The switch button lights up blue when the left connection (1) is selected or green when the right connection (2) is selected. You can visually mark the connection cables using the included green and blue stickers as cable flags. Attach these stickers to the cables to distinguish the connections from any angle.
HDMI 2.1 Switch 2× 1 bi-directional
Operating instructions
Thank you for purchasing this high-quality product. Please keep this manual
in a safe place to clarify any questions regarding its use. Additional
information can be found on our website or through our service.
Intended use
- Bi-directional HDMI switch for alternating operation of 2 feed players on one display or 2 displays on one HDMI source
- Switching between connections 1 and 2 via the button
- Integrated HDMI cable
- Power supply through HDMI source
Installation and operation
2 HDMI feeders and 1 display
- Connect the HDMI outputs of 2 devices to HDMI 1 and 2 on this switch.
- Plug the built-in HDMI cable into the HDMI input of the TV, monitor, AV receiver or video projector.
1 HDMI source and 2 displays
- Plug the built-in HDMI cable into the HDMI output of the source player.
- Connect HDMI 1 and 2 to the HDMI inputs of the TV, monitor, AV receiver or video projector.
- First switch on the HDMI sink (e.g. TV), then the HDMI source
- To switch between the two connections, press the button
Connections & display
- 1 and 2 HDMI sockets, the signal direction changes depending on the use:
- Signal inputs for 2 HDMI players and one display
- Signal outputs for one HDMI player and 2 displays
- integrated HDMI cable 48 Gbps
- Switch for switching between the two
The switch lights up blue when the left connection 1 is selected or green when the right connection 2 is selected. A green and a blue sticker are included as cable flags to visually mark the connection cables. If you attach these stickers to the cable, you can distinguish the connections from any angle.
Features and specifications
- Supported HDMI 2.1 features: ALLM, VRR, QFT
- Maximum data rate 48 Gbps
- Maximum video format 4K 120Hz YUV 4:4:4 12-bit or 8K 60Hz YUV 4:2:0 12-bit
- Supports HDR, HDR10, HDR10+, Dolby Vision
- Passthrough of CEC device control
- Supports all audio formats, incl. LPCM2.0–7.1, Dolby Digital Plus, AC3, Dolby TrueHD / Atmos, Dolby MAT, DTS, DTS-HD, DSD
- Power supply via HDMI source 5 V DC, power consumption < 0.5 W
- Scope of delivery: HDMI 2×1 switch, sticker
Safety Instructions
- Please do not cover the housing and do not install the device to avoid overheating.
- Keep away from heat sources, fire, water and moisture.
- Do not place heavy objects on the unit or the connecting cables.
- Do not open or drill holes in the housing.
- Clean the surface of the device only with a soft, dry cloth, no cleaning agents, petrol or similar.
In case of prolonged non-use or malfunction, please disconnect the HDMI cables.
Service
An inspection of the device by qualified personnel is necessary in the
following cases.
- Objects or liquids have entered the device.
- The unit doesn’t operate normally or performance has changed.
- The unit has been dropped or the housing is damaged.
Unplug the HDMI cables and stop using the unit. Do not attempt to repair or open the unit yourself. Contact trained service personnel or the seller or FeinTech, for example, by e-mail at service@feintech.eu
Disposal of the packaging
The packaging of your device consists exclusively of recyclable materials.
Please sort them accordingly and recycle them. Please contact your dealer or
your municipal waste disposal facility/recycling center for information on
current disposal methods.
Disposal of the device
Old appliances are not worthless waste. Valuable raw materials can be
recovered through environmentally friendly disposal. At the end of its life,
this product should not be disposed of with normal household waste but should
be taken to a collection point for the recycling of electrical and electronic
equipment.
The symbol on the product, the instructions for use or the packaging indicates this. The materials are recyclable according to their marking. By reusing, recycling, or other forms of recycling old equipment, you are making an important contribution to protecting our environment.
UKCA declaration of conformity
This product complies with UK regulations and may only be used together with shielded cables. We, Spreewald Kommunikationstechnik GmbH, hereby declare that this device complies with the Electromagnetic Compatibility Regulations 2016 and the RoHS Regulations 2012. The formal declaration of conformity is available at https://feintech.eu/ce or on request.
FeinTech is a registered trademark of Spreewald Kommunikation- stechnik GmbH – Radensdorfer Hauptstr. 45 a – 15907 Lübben (Spreewald) Germany – info@feintech.eu • www.feintech.eu
References
- FeinTech | Dein Spezialist für Audio, Video & HDMI | Offizieller Shop
- CE Konformitätserklärungen - FeinTech