Elements B.4823.CHE Ernesto 4 Drawer Chest Instruction Manual
- June 12, 2024
- ELEMENTS
Table of Contents
Elements B.4823.CHE Ernesto 4 Drawer Chest
Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury, therefore, for your protection, please remove any exposed staples used in packing.
- We recommend that you should assemble this product with the assistance of another person; this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.
- Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment.
- Please do not over tighten screws or bolts.
- Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly purchased product correctly and efficiently.
PART LIST
| Part | Part Desc. | Code | Qty |
|---|---|---|---|
| 1 | Top Panel | PB.4823.CHTOP / PB.4825.CHTOP | 1 |
| 2 | Bottom Panel | PB.4823.CHBTP / PB.4825.CHBTP | 1 |
| 3 | Side Panel Left w/Glide | PB.4823.CHSPN1 / PB.4825.CHSPN1 | 1 |
| 4 | Side Panel Right w/Glide | PB.4823.CHSPN2 / PB.4825.CHSPN2 | 1 |
| 5 | Back Frame Center Support | PB.4823.CHFCSP / PB.4825.CHFCSP | 1 |
| 6 | Front Drawer Frame Rail 1,3 | PB.4823.CHDFRL1 / PB.4825.CHDFRL1 | 2 |
| 7 | Front Drawer Frame Rail 2,4 | PB.4823.CHDFRL2 / PB.4825.CHDFRL2 | 2 |
| 8 | Front Top Frame Rail | PB.4823.CHTFRL / PB.4825.CHTFRL | 1 |
| 9 | Drawer Head Panel | PB.4823.CHDWHP / PB.4825.CHDWHP | 4 |
| 10 | Drawer Back Panel | PB.4823.CHDWBP / PB.4825.CHDWBP | 4 |
| 11 | Drawer Side Panel Left with Glide | PB.4823.CHDWSP1 / PB.4825.CHDWSP1 | 4 |
| 12 | Drawer Side Panel Right with Glide | PB.4823.CHDWSP2 / PB.4825.CHDWSP2 | 4 |
| 13 | Drawer Support Rail | PB.4823.CHDWRL / PB.4825.CHDWRL | 4 |
| 14 | Drawer Bottom Panel 3mm | PB.4823.CHDWBT / PB.4825.CHDWBT | 4 |
| 15 | Back Panel | PB.4823.CHBPN / PB.4825.CHBPN | 2 |
HARDWARE LIST
Assembly Instruction
FITTING OF ANTI-TIP SAFETY STRAP
WARNING: To avoid serious personal injury:
- Carefully and strictly follow assembly instructions. Improper assembly of furniture can result in structural failure, instability of the product, or tip-over.
- Monitor and carefully control the assembly components. These include small parts and hardware that may present a choking hazard to small children. Furniture should be assembled only by responsible adults and children should not be involved in the assembly process.
- Where provided, wall mounting hardware should always be used as prescribed in these instructions to anchor furniture to wall. Proper use of the wall mounting hardware can significantly reduce the potential for furniture tip-over and crushing injuries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>