LASER HPS-KBTPOP-RB Wireless LED Headphone User Manual
- June 9, 2024
- Laser
Table of Contents
HPS-KBTPOP-RB Wireless LED Headphone
User Manual
Wireless LED Headphone
HPS-KBTPOP-RB
HPS-KBTPOP-RB Wireless LED Headphone
Thank you for your purchase!
Laser Corporation is 100% Australian owned & operated. To get the most out of
your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs,
Warranty claims, and more, please scan the following QR code:
https://www.laserco.com.au/support
WHAT’S IN THE BOX
- Headphone
- Charging Cable
- User Manual
SPECIFICATIONS
| Operating Distance: | 10 Meters |
|---|---|
| Battery Runtime: | 3-4 hours |
| Frequency: | 20Hz – 20 kHz |
| Speaker Impedance: | 32Ω |
| Sensitivity: | 75dB+/-3dB |
| Charge Time: | 1-2 Hours |
CONTROLS
| – Press and hold to turn on and enter pairing mode.
– Short press: Play/Pause.
– Double press: Call last number.
– Long press: Reject call.
---|---
FM/MP3| – Switches between FM Radio mode and Bluetooth mode.
V-| – Short Press: Volume Down.
– Long Press: Previous song.
V+| – Short Press: Volume Up.
– Long Press: Next Song.
| – Press to turn on.
– Press and hold to turn off.
| – Plug the micro USB cable into the port to charge the device.
| – Plugging a 3.5mm headphone cable into the AUX port will allow wired use.
OPERATING INSTRUCTIONS
Pairing:
- Turn the headphone on.
- The headphone will automatically enter pairing mode.
- Open the Bluetooth settings on your device, then search for and select “HPS-KBTPOP-RB”.
AUX Mode:
- Plug the 3.5mm audio cable directly into the headphone jack.
FM Mode:
- Press the mode button twice to start an auto scan and press mode once more after the scan has completed to end it.
- Using the Next/Previous song functions will change stations
TROUBLE SHOOTING
No Power:
- Check battery level and charge if required.
- Try charging the headphone with a USB wall adapter (like a smartphone charger) instead of a laptop or computer.
- A USB wall adapter up to 5V/1A is recommended for charging.
Problems Connecting to Bluetooth:
- Place the speaker next to the smart device you are pairing to e.g., Smartphone.
- Place the headphone next to the smart device you are pairing to e.g., Smartphone.
- If the Bluetooth name “HPS-KBTPOP-RB” does not appear on the list of available devices, then try refreshing the list or searching again.
- Allow up to 1 minute for the device to appear on the Bluetooth list.
- Make sure the headphone is in Bluetooth mode (default mode when turning on speaker) before searching on your smart device.
- If the headphone is already connected to another smart device, it will need to be unpaired from that device first or it will need to be out of Bluetooth connection range of that device before it can be connected to another.
Visit our websitewww.laserco.com.au
Check us out at
www.youtube.com/lasercoau
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>