FeinTech VMA 00201 HDMI ARC Adaptor with Downmix for Analog Audio Instruction Manual

FeinTech VMA 00201 HDMI ARC Adaptor with Downmix for Analog Audio

HDMI ARC Adapter with downmixer for analog audio

Operating instructions
Thank you for purchasing this high quality product. Please keep this manual in a safe place to clarify any questions regarding its use. Addi­tional information can be found on our website or through our service.

Intended use

• Delivers the sound of a TV with HDMI ARC connection to headphones, audio amplifiers or a stereo system, decoding Dolby Digital or DTS to stereo.
• Also passes the ARC sound unchanged to a soundbar
• Controls the volume at the outputs with the TV remote control via HDMI-CEC (Consumer Electronics Control)

Installation and operation

• Activate the HDMI CEC control on your TV. Depending on the manufacturer, this is also called Anynet+, Bravialink, Easylink, Simplink or Vieralink.
• Then connect the TV HDMI connection of the VMA00201 to the HDMI ARC connection of your TV. Optionally, you can connect the soundbar HDMI connection to the HD Ml-ARC connection of the soundbar or AV receiver. Be sure to use a fully connected HDMI cable for this purpose.
• Then power the VMA00201 using a USB socket on your TV or other device with the USB cable supplied.
•  Connect your audio device (headphones, hearing amplifier, infrared/ Bluetooth transmitter) via jack plug to the 3.5 mm socket.
• With most TVs, the internal speakers are switched off when the adapter is active (ARC LED lights up). With some TVs, you still have to select the desired audio output via HDMI-ARC. It takes a few seconds until the connection is established.
• Adjust the volume louder or softer as usual with the TV remote control. The volume display on the TV may change from what you are used to.
• When the sound bar is active, the headphone output is at maximum volume and the TV remote control only controls the sound bar.
•  When the soundbar is switched off, the headphone volume can be controlled by the TV remote control.

Features and specifications:

• Supports HDMI 2.0 and HDMI-ARC passthrough
• Volume control via HDMI-CEC
• Supports audio format PCM stereo, Dolby Digital, DTS
• Audio output: 20 – 20.000 Hz
• Audio output level: 2 V RMS
• SNR: > 90 dB
• Cross talk: > 80 dB
• Total harmonic distortion THD: < 0,1 % (V.,,), 0,001-0,01% (V,,)
• Power supply via USB 5 V DC, consumption: < 1,6 W
• Operational temperature: -5° C to 50° C,
• humidity: < 90 %

Connectors & displays

1. Audio output 3,5 mm jack for headphones or active speakers
2. HD Ml-ARC pass for sound bar or AV receiver HDMI output
3. Power-LED (red), light up when deviecs is powered
4. USB-micro connector for power supply
5. LED (red), lights up for stereo audio output, flashes for Dolby Digital
6. ARC-LED (green), lights up if ARC-connection is active
7. HD Ml-ARC connector for tv

Safety Instructions

• Please do not cover the housing and do not install the device to avoid overheating.
• Keep away from heat sources, fire, water and moisture.
• Do not place heavy objects on the unit or the connecting cables.
• Do not open or drill holes in the housing.
• Clean the surface of the device only with a soft, dry cloth, no cleaning agents, petrol or similar.
• In case of prolonged non-use or malfunction, please disconnect the USB cable.

Service

An inspection of the device by qualified personnel is necessary in the following cases.

• Objects or liquids have entered the device.
• The unit does not operate normally or the performance has changed.
• The unit has been dropped or the housing is damaged. Unplug the USB cable and stop using the unit. Do not attempt to repair or open the unit yourself. Contact trained service personnel or contact the seller or Fein Tech, for example, by e-mail at service@feintech.eu

Disposal of the packaging

The packaging of your device consists exclusively of recyclable materials. Please sort them accordingly and recycle them. Please contact your dealer or your municipal waste disposal facility/ recycling centre for information on current disposal methods.

Disposal of the device

• Old appliances are not worthless waste. Valuable raw materials can be recovered through environmentally friendly disposal. At the end of its life, this product should not be disposed of with normal household waste, but should be taken to a collection point for the recycling of electrical and electronic equipment.
• The symbol on the product, the instructions for use or the packaging indicates this. The materials are recyclable according to their marking. By reusing, recycling or other – forms of recycling old equipment, you are making an important contribution to protecting our environment.

UKCA declaration of conformity

•  This product complies with UK regulations and may only be used together with shielded cables. We, Spreewald Kommunikationstechnik GmbH, hereby declare that this device complies with the Electrical Equipment (Safety) Regulations 2016, the Electromagnetic Compatibility Regulations 2016 and the RoHS Regulations 2012. The formal declaration of conformity is available at https://feintech.eu/ce or on request.
• Fein Tech is a registered trademark of Spreewald Kommunikationstechnik GmbH – Radensdorfer Hauptstr. 45 a – 15907 Lubben (Spreewald) Germany – WEEE-Reg. DE 15618234 – info@feintech.eu

It Dolby Audio

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>