FeinTech LTL00700 LED Monitor Lamp User Manual

: June 4, 2024
: FeinTech

Table of Contents

Safety Instructions
Technical data
Overview controls & connector
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

LTL00700
LED Display Clamp Lamp

Thank you for choosing this LED luminaire.
Intended use:
The luminaire is used to illuminate a desk or the area in front of a monitor. The luminaire is clamped to the monitor frame for mounting. The power (5V DC, 1 A) is supplied via a USB socket on the monitor, computer, or an external power supply unit. A USB power supply unit is not supplied.

Safety Instructions

Use the luminaire only on suitable monitors with a frame thickness of 7 to 45 mm. Make sure that the lamp fixture does not touch the sensitive screen surface.
Ensure that the monitor is firmly fixed and that the clamp luminaire does not impair stability.
Use the luminaire indoors only and do not expose it to moisture, heat, open fire, or harsh cleaning agents.
Please do not attempt to open the housing.
In case of malfunction, heat generation, or unusual smell or behavior, please disconnect the USB cable and contact your dealer or fintech.
Route the USB cable so that it cannot be accidentally caught or tripped over.

Delivery contents:

LED Display clamp light
USB cable approx. 1.5 m length
this guide

Installation & Operation
Remove the protective film and clamp the luminaire onto the top edge of your monitor. The touch control panels of the lamp should face you. To avoid scratches, please do not touch the screen of your monitor. Connect the USB-C connector of the lamp to a USB port on your monitor, hub, computer, or power supply. A USB port that can supply at least 1A current is required for full power. These connections are often found on the back of a PC.
Then tap on , it to power on the lamp. Then align the lamp head so that it does not dazzle and illuminates the desired area. The lamp head can be swiveled up and down within a total range of 170°. By tapping on you can switch the light color (CCT) in 5 steps. Via you can dim the light in 5 steps. If you tap the touch surface for longer, the
5 levels change continuously. The last selected settings are saved and will be used again the next time you switch them on.

Technical data

Light source 48 LEDs 0,2W
Life span L,, B,, 25,000 hours
Correlated Colour Temperature (CCT) 3300°-5700° K
Colour Rendering Index (CRI) > 80 R_
Light power,>500 I’m
Illumination > 800 Lux center brightness at 30 cm distance
Half-value angle 120°
Power requirements DC 5 V / 1 A
Power consumption P_maximum 5.5 W
Energy efficiency class F (A ..G)
Dimensions 447 x 85 25 mm

Overview controls & connector

FeinTech LTL00700 LED Monitor Lamp

Swivel joint on the lamp head can be swiveled 170° up and down
Lamp base, for clamping to monitor frames up to 45 mm depth
USB-C connector for power supply 5V,1 A
Touch button for dimming (switches brightness in 5 steps)
on/off switch button
Touch button for color temperature (switches light color in 5 steps)

Disposal of packaging
The packaging of your device consists exclusively of recyclable materials please sort them accordingly and return them to the ~Dual System”. Please contact your dealer or your municipal waste disposal facility/recycling center for information on current disposal methods.
Disposal of the device
Old appliances are not worthless waste. Valuable raw materials can be recovered through environmentally friendly disposal. At the end of its life, this product should not be disposed of with normal household waste and should be taken to a collection point for the recycling of electrical and ionic equipment.
The symbol on the product, the instructions for use, or the packag ing indicates this. The materials are recyclable according to their marking.
By reusing, recycling, or other forms of recycling old appliances, you are making an important contribution to the protection of our environment.
Ce declaration of conformity
This product complies with EU directives. We, Spreewald Kommunikation Technik GmbH, hereby declare that this device complies with the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. You can ob tain the formal declaration of conformity under https://feintech.eu/ce or on request.

FeinTech is a registered trademark of
Spreewald Kommunikationstechnik GmbH
Radensdorfer Hauptstr. 45 a
15907 L~bben (Spreewald)
Germany
Contact:info@feintech.eu
+49 3546 2398855