PROLED L710C3xx Downlight Mini Cove Instruction Manual
- July 22, 2024
- PROLED
Table of Contents
PROLED L710C3xx Downlight Mini Cove
Specifications:
- Product Name: PROLED DOWNLIGHT MINI COVE – L710C3xx
- Input Voltage: 220-240VAC
- Manufacturer: MBN GmbH
- Address: Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
- Website: www.proled.com
- Installation: Indoor use only
- Protection Class: IP40
Product Usage Instructions
Warning:
- For indoor use only.
- Ensure safe disposal of packaging materials.
- Do not use the luminaire if the cable is defected.
- Installation should be done by a qualified electrician.
- Avoid looking directly at the lighted luminaire.
Safety Indices:
It is important to have a qualified electrician complete the installation to
ensure safety and compliance with European directives. The manufacturer is not
liable for damages caused by improper use or installation. Do not cover lamps
with heat-insulating materials.
Installation:
- Switch off electricity at the mains and remove the appropriate circuit fuse before installation.
- Connect to a constant current driver 300 mA on the secondary side.
- Connect the primary side of the driver to the power supply (230V).
- Ensure all connections are secure with no loose strands.
- Comply with fire regulations during installation.
- If unsure, consult a qualified electrician.
Please follow the sequence of installation steps to avoid damaging the LED:
- First LED driver (driver not included).
- Then LED driver (driver not included) INPUT: 220-240VAC.
Technical amendments reserved as of 06.16
FAQ:
-
Q: Can I install this product outdoors?
A: No, this product is designed for indoor use only. -
Q: Do I need to hire an electrician for installation?
A: Yes, it is recommended to have a qualified electrician install the product to ensure safety and compliance with regulations.
Characteristics
- CREE COB Chip in Warm White or Neutral White
- LED power 3 Watt
- Metal housing round or square in White
- Mounting ring color White
- Beam angle 40°
- Driver 300 mA constant current (driver not included)
- Dimmable with special 300 mA constant current dimmer or 300 mA constant current driver
- Operating temperature range -10° C till +45° C
- CE compliant with applicable European directives
Warning:
- For indoor use only.
- Please ensure that the packaging is disposed of in a safe environment.
- If cable is defected, do not use the luminaire.
- We do recommend that a qualified electrician should be used to install the products.
- Do not look at the lighted luminaire directly.
Safety indices:
Be sure to have a qualified electrician complete installation. The customer is
not entitled to claim for any lights installed without observing European
safety directives. The manufacturer is then discharged from liability when
damage is caused by improper use or installation. If any luminaire is
subsequently modified, the person responsible for the modification shall be
considered as manufacturer. Do not cover lamps with heat-insulating materials.
For indoor use only. Protection class IP40.
Installation
Please follow the sequence of installation step by step. Non-observance can lead to damage of LED.
- Switch off the electricity at the mains before commencing installation or lamp change and (if a fuse box is installed) remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
- Connect to a constant current driver 300 mA (secondary side).
- Connect primary side of driver to power supply (230V).
- Make sure all connections are tight with no loose strands.
- Ensure fire regulations are not breached when fitting your lights.
- If you are in any doubt regarding these instructions, consult a qualified electrician.
Please follow the sequence, if not destroying of LED:
Installation steps
- Make a cut out for the luminaire in the ceiling and check if there is enough installation space.
- Shut off fuse in fuse box. Connect luminaire to driver only after power-off.
- Connect driver to the mains supply and install luminaire in the ceiling according to below sketch.
- Adjust the luminaire. Shut on fuse in fuse box. The luminaire can be used now.
06.16 Technical amendments reserved
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
www.proled.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>