FeinTech VMA00102 HDMI ARC Adaptor-Converter for Analog Audio Instruction Manual

VMA00102

HDMI ARC Adapter / Converter for analog audio

Operating instructions
Thank you for purchasing this high-quality product. Please keep this manual in a safe place to clarify any questions regarding its use. Additional information can be found on our website or through our service.

Intended use

• delivers the sound of a television with HDMI ARC connection to headphones and/or a stereo system
• adjusts the volume on the outputs with the TV remote control using HDMI-CEC (Consumer Electronics Control)
• the last volume setting remains stored

Installation and operation

• Set the TV to PCM stereo sound format. Bitstream and multichannel sound formats such as Dolby Digital cannot be decoded by this unit.
• Activate the HDMI CEC control on your TV. Depending on the manufacturer, this is also called Anynet+, Bravialink, EasyLink, Simplink, or VieraLink.
• Then connect the HDMI connector on the VMA00102 to the HDMI ARC connector on your TV. Be sure to use a fully connected 19+1 HDMI cable, type HDMI Highspeed with Ethernet and Audio-Re-turn-Channel – HEAC” or HDMI Premium”.
• Then connect the VMA00102 to a free USB socket on your TV or other device using the USB cable supplied. This USB cable will provide power to the HDMI ARC adapter.
• Connect your audio device to the 3.5 mm jack or use the RCA jacks for connection.
• On most TVs, the internal speakers are switched off when the adapter is active (green LED is lit).
• On some TVs you have to switch the desired audio output to HD-MI-ARC. It takes a few seconds until the connection is established.
• Adjust the volume as usual with the TV remote control to increase or decrease volume. The volume display on the TV will change from the usual appearance and will only show louder / softer instead of absolute values.
• HDMI-ARC stands for “High Definition Multimedia Interface Audio Return Channel”- the audio signal is transmitted in the opposite direction to the video signal

Features and specifications:

• Supports HDMI 2.0
• Volume control via HDMI-CEC
• Supports audio format PCM (LPCM 2.0)
• Audio output 20 – 20.000 Hz
• Audio output level 2 V p-p
• SNR > 90 dB, Crosstalk > 80 dB
• Total harmonic distortion THD < 0,1 % (Velez), 0,001-0,01% (Vbest)
• Power supply via USB 5 V DC, consumption 172 mA
• Operational temperature -5°C to 50° C, humidity < 90 %

Connectors & displays

1. Audio output 3,5 mm jack for headphones or active speakers
2. RCA left & right audio output for HiFi system
3. Power-LED, light up when device is powered
4. USB-micro connector for power supply
5. Operation LED, lights up if a device is ready
6. ARC-LED lights up if ARC-connection is active
7. HDMI-ARC connector for tv

Safety Instructions

• Please do not cover the housing and do not install the device to avoid overheating.

• Keep away from heat sources, fire, water, and moisture.

• Do not place heavy objects on the unit or the connecting cables.

• Do not open or drill holes in the housing.

• Clean the surface of the device only with a soft, dry cloth, no cleaning agents, petrol, or similar.

• In case of prolonged non-use or malfunction, please disconnect the USB cable.
  Service
  An inspection of the device by qualified personnel is necessary in the following cases.

• Objects or liquids have entered the device.

• The unit does not operate normally or the performance has changed.

• The unit has been dropped or the housing is damaged. Unplug the USB cable and stop using the unit. Do not attempt to repair or open the unit yourself. Contact trained service personnel or contact the seller or FeinTech, for example, by e-mail at service@feintech.eu

Disposal of the packaging
of your device consists exclusively of recyclable materials. Please sort them accordingly and recycle them. Please contact your dealer or your municipal waste disposal facility/recycling center for information on current disposal methods.
Disposal of the device
Old appliances are not worthless waste. Valuable raw materials can be recovered through environmentally friendly disposal. At the end of its life, this product should not be disposed of with normal household waste but should be taken to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, the instructions for use, or the packaging indicates this. The materials are recyclable according to their marking. By reusing, recycling, or other forms of recycling old equipment, you are making an important contribution to protecting our environment.

declaration of conformity
**** This product complies with EU directives and may only be used together with shielded cables. We, Spreewald Kommunikationstechnik GmbH, hereby declare that this device complies with the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU, and the RoHS Directive 2011/65/EU. The formal declaration of conformity is available at https://feintech.eu/ce or on request.

FeinTech is a registered trademark of Spreewald Kommunikationstech-nik GmbH – Radensdorfer Hauptstr. 45 a – 15907 Labben (Spreewald) Germany – WEEE-Reg. DE 15618234 – info@feintech.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>