Marson MT8225HF 2D HF Handheld Barcode Scanner User Guide
- July 13, 2024
- MARSON
Table of Contents
Marson MT8225HF 2D HF Handheld Barcode Scanner
Product Specifications
- Dimensions: 23.5mm x 42.5mm x 102mm
- Type: 2D/HF Handheld Barcode Scanner
- Compliance: CE Marking, RoHS Directive 2002/95/EC
- Scanning Range:
- 5 Mil Code39: 50 – 150mm
- 13 Mil EAN/UPC: 60 – 310mm
- 15 Mil QR Code: 35 – 180mm
- 6.67 Mil PDF417: 50 – 125mm
- 10Mil Data Matrix: 45 – 125mm
- Beeper Indication:
- Single Long Beep: Power up
- Single Short Beep: Good read
- Two beeps: Successful setup
- LED Indication:
- Off: Power off/Standby
- Red: Power up
- Green: Good read
Product Usage Instructions
-
Warnings and Cautions
-
Do not expose the scanner to high temperatures or extremely
humid areas. -
Avoid placing the scanner in oily or smoky environments.
-
Do not insert foreign materials or water into the scanning
window or vents. -
Avoid using the scanner with wet hands or in unstable
locations.
-
-
Cleaning and Maintenance
-
Avoid using anti-slip gloves or chemicals on the scanner
housing. -
Do not scratch, modify, or apply excessive force on the scanner
or its interface cable. -
Ensure the scanning window is clean and free from
obstructions.
-
-
Getting Started
-
Ensure your host device supports USB keyboard
functionality. -
Connect the scanner to a USB port on your host device.
-
The scanner will emit three beeps upon powering up.
Frequently Asked Questions (FAQ)
-
Q: What should I do if there are abnormal odors or noises coming from the scanner?
- A: Immediately power off the host computer, disconnect the interface cable, and contact your nearest dealer for assistance.
-
Q: Can I clean the scanner with chemicals?
- A: Avoid using chemicals on the scanner housing, as it may result in damage and potential hazards. Use a soft, dry cloth for cleaning.
-
Q: Is it safe to use the scanner in direct sunlight?
- A: No, avoid placing the scanner in areas with excessive heat such as direct sunlight to prevent damage and malfunction.
2D/HF Handheld Barcode Scanner
Quick Guide
2D/HF Handheld Barcode Scanner Quick Guide (Rev1) P/N: 8013-0088000
FCC WARNING STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CE MARKING AND EUROPEAN UNION COMPLIANCE
Testing for compliance to CE requirements was performed by an independent
laboratory. The unit under test was found compliant with all the applicable
Directives, 2004/108/EC and 2006/95/EC.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
The WEEE directive places an obligation on all EU-based manufacturers and
importers to take-back electronic products at the end of their useful life.
ROHS STATEMENT OF COMPLIANCE
This product is compliant to Directive 2002/95/EC.
NON-MODIFICATION STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
WARNING AND CAUTION
- Take any metals into contact with the terminals in connectors.
- Use the scanner where any inflammable gases.
If following condition occur, immediately power off the host computer, disconnect the interface cable, and contact your nearest dealer.
- Smoke, abnormal odors or noises come from the scanner.
- Drop the scanner so as to affect the operation or damage its housing.
Do not do behavior below.
- Put the scanner in places excessively high temperatures such as expose under direct sunlight.
- Use the scanner in extremely humid area or drastic temperature changes.
- Place the scanner in oily smoke or steam environment such as cooking range.
- Be covered or wrapped up the scanner in bad-ventilated area such as under cloth or blanket.
- Insert or drop foreign materials or water into scanning window or vents.
- Using the scanner while hand is wet or damp.
- Use the scanner with anti-slip gloves containing plasticizer and chemicals or organic solvents such as benzene, thinner, insecticide etc to clean the housing. Otherwise, it could not result fire and electrical shock but housing may be broken and injured.
- Scratch or modify the scanner and bend, twist, pull or heat its interface cable.
- Put heavy objects on interface cable.
Do not stare the light source from the scanning window or do not point the scanning window at other people’s eyes or eyesight may be damaged by direct exposure under the light.
Do not put the scanner on an unstable or inclined plane. The scanner may drop,
creating injuries.
Once the interface cable is damaged such as exposed or broken copper wires,
stop using immediately and contact your dealer. Otherwise, it could result
fire or electrical shock.
SPECIFICATIONS
OPTIC & PERFORMANCE
- Light source visible white LED, visible red LED
- Sensor 640 x 480
- Resolution 3mil/ 0.075mm
- Depth of Field 5 Mil Code39: 50 – 150mm
- (Guaranteed) 13 Mil UPC/EAN: 60 – 310mm
- 15 Mil QR Code : 35 – 180mm
- Symbiology’s QR Code, PDF417, Aztec, DataMatrix, Dotcode and major 1D barcodes
RFID PERFORMANCE
- Frequency 13.56MHz
- Standards ISO 15693, ISO 14443A/B, NFC
- Reading Range ISO 15693: 0 – 50mm
- (Guaranteed) ISO 14443: 0 – 25mm
GENERAL SPECIFICATIONS
- Dimension L102 x W42.5 x H23.5 mm
- Weight 193g
- Connector USB Type A
- Cable 3M USB Coiled Cable
- Interface USB HID, USB VCP
- Indicator LED, Buzzer, Vibrator
- Voltage 5VDC±5%
- Working Current < 250mA
- Standby Current < 80mA
- Operating Temp. -10 to 50°C (14°F to 122°F)
- Storage Temp. -20 to 60°C (-4° F to 140°F)
- Drop Durability 1.5M
DIMENSIONS
SCANNING RANGE
- 5 Mil Code39: 50 – 150mm
- 13 Mil EAN/UPC: 60 – 310mm
- 15 Mil QR Code: 35 – 180mm
- 6.67 Mil PDF417: 50 – 125mm
- 10Mil Data Matrix: 45 – 125mm
BEEPER INDICATION
- Single Long Beep Power up
- Single Short Beep Good read
- Two beeps Successful setup
LED INDICATION
- Off Power off/Standby
- Red Power up
- Green Good read
GETTING STARTED
- The scanner works like an USB keyboard. Make sure your host device supports USB keyboard before use.
- Plug the scanner to the USB port of your host device. The scanner will emit three beeps at power-up.
- The OS will automatically install USB driver for the scanner if it is connected to your host device for the first time. Wait until the installation finishes.
- Open Notepad or any application that can accept keyboard input. Try scanning some random barcodes and the barcode data will be displayed.
BUTTON DEFINITION
GENERAL SETTINGS
READING MODE
- The LED will turn on when the trigger is pressed.
- The LED will turn off when trigger is released.
- The LED will automatically turn on when any image change is detected within the scanner’s field of view.
- When a barcode is successfully scanned or LED timeout (5 sec) expires, the LED turns off.
- The trigger is unfunctional in Auto-Sensing Mode.
- The LED will stay on.
- The LED will turn off shortly after a barcode is successfully scanned and turn on again.
- Trigger serves as toggle for scanning.
CODE ID
VIBRATOR
CAPSLOCK
ENABLE SYMBOLOGIES
DISABLE SYMBOLOGIES
BEEP TONE
UTF-8 TO UNICODE
COUNTRY CODE PAGE
UTF-8 TO UNICODE
TERMINATOR
KEYBOARD LAYOUT
Documents / Resources
|
Marson MT8225HF 2D HF Handheld Barcode
Scanner
[pdf] User Guide
MT8225HF, 2D HF Handheld Barcode Scanner, MT8225HF 2D HF Handheld Barcode
Scanner, MT8225HF Barcode Scanner, Handheld Barcode Scanner, Barcode Scanner,
Scanner
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>