Lekaby Wireless Earbuds, Bluetooth 5.1 Headphones 100h Playtime with Digital LED Display-Complete Features/Instruction Guide
- June 5, 2024
- Lekaby
Table of Contents
Lekaby Wireless Earbuds, Bluetooth 5.1 Headphones 100h Playtime with
Digital LED Display
Specifications
- BRAND : Lekaby
- EAR PLACEMENT : In-Ear
- COLOR : Black
- CONNECTIVITY TECHNOLOGY : Wireless
- MODEL NAME : Q26-B
- PRODUCT DIMENSIONS: 3.16 x 2.06 x 1.15 inches
- ITEM WEIGHT: 3.28 ounces
- BATTERIES: 3 Lithium Polymer batteries
Introduction
The charging case’s 2600mAh battery capacity allows for numerous charges for both earbuds, with each lasting up to 8 hours (at 60% volume) on a single charge. As a result, by taking turns, you can listen to up to 100 hours of music. The power of each earbud and charging case is plainly visible thanks to the separate LED wireless headset power display design. When you need it, you may also use the charging case as a mobile power source for your phone. With 10 mm speakers and a triple-layer composite diaphragm, these music headphones produce powerful bass, breathtaking highs, and crisp mids. The Q26 earbuds have mono and dual stereo modes, allowing you to share them with your friends and family. CVC 8.0 noise reduction technology helps others to hear you very clearly when chatting to you. Each earbud has a built-in microphone dedicated to calls. The Q26 is equipped with a Bluetooth 5.1 chip. When you take the wireless earphones out of the charging case, they’ll connect to the previously associated device immediately. The range can be as far as 50 feet (no obstructions). The Bluetooth earphones will automatically switch off and charge when you put them back in (the LED digital display does not light up to indicate that the headset is fully charged or misplaced need to adjust the headset position).
The surface and angle of the in-ear section of the Q26 earbuds have been polished and improved numerous times to achieve a balance of beauty and comfort and to make it comfortable to use. A single earbud weighs only 4.5g, making it as light as a feather and virtually invisible in the ear. Ergonomic design gives a secure and comfortable fit that does not protrude from your ears, making it ideal for sports, workouts, and the gym. These Bluetooth headphones have an IPX7 waterproof rating, and the nano-coating on the earbuds prevents water and sweat from penetrating, making them suitable for use as sport wireless headphones. You can listen to music while exercising, working, reading, sleeping, and attending meetings, among other activities. You may control the phone by touching either earbud during use, such as the music switch, volume adjustment, and so on.
BEFORE USE
Remove the protective film before charging
HOW TO CLEAN
After use, please wipe and dry charging contacts, ear tips and mesh
Frequently Asked Questions
-
Why isn’t the digital display displaying anything?
The digital display will automatically switch off after the headset is fully charged, in order to preserve electricity. If you wish to continue viewing the digital display, elevate the headset and then place it back on the can see. The earphone’s indication light will turn red if they are charging. -
What is the best way to deal with charge issues?
Using an alcohol pad, clean the charging contacts, ear tips, and mesh to eliminate any dust or earwax that may be impairing charging or sound volume. -
Why is it that the right side of the headset consumes more power than the left?
The right headset consumes more power because it is the primary headset. However, if the right headphone loses power, the left headphone can still be used because our wireless headphones have a single-ear mode and can be used separately. -
How can I fix a connectivity problem?
(Remove your earbuds and re-insert them.)
Make sure the earbuds are charged by placing them in the charging case.
Delete the phone’s Bluetooth connecting information.
Remove the earbuds from the charging case and wait 20 seconds for only one earbud to light up. You can now re-pair your phone. -
When my wireless earphones are fully charged, how do I know?
When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged. -
Why is it that only one of my true wireless earphones is functioning?
Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal. -
When charging earbuds, what does the blue light mean?
The blue light on the outside indicates that the battery is charged. According to the user handbook, it can charge your earbuds up to ten times. -
What does the blue light on earbuds indicate?
The headphones may be in pairing mode if they have a slow pulsing blue light. Blinking red and blue is the most popular light pattern for pairing mode. However, you should try pairing your headphones with another device to check whether the flashing blue light goes away after the device is linked. Interference is a possibility. -
Why am I unable to hear with both earbuds?
There are a variety of reasons why a pair of headphones will only play sounds in one ear. The most common cause of sound coming out of only one side is a short in the wiring produced by the wires near the audio jack being bent back and forth so many times. -
Why aren’t both of my wireless earbuds working together?
Your device’s Bluetooth setting should be turned off. When you take the earbuds out of the case, they will immediately switch on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: If something doesn’t work the first time, give it another shot.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>