GL iNet GL-AP1300 AC1300 Wireless Access Point User Guide

June 5, 2024
GL iNet

GL iNet GL-AP1300 AC1300 Wireless Access Point

SETTING UP

Power On

When powered up, your GL·AP1300 will broadcast two Wi-Fi signals with the SSID: GL·AP1300·XlllC and GL·AP1300·XlllC·5G. The PoE injector should be compatible with active or passive 4BV B02.3at standard.

Connect to the Wi-Fi

Connect to the 2GHz Wi·Fi called GL·AP1300·XlllC, and input the default Wi·Fi password good/ife, which is also printed on the bottom of the router.

Search the SS/0 and connect to it

Default password Is goodlife

Set up Router

Visit http:/1192.168.8.1 in your browser to set up your router; start by choosing your preferred language.

Connect via LAN

Plug the cable connecting to your computer into LAN port.

GL iNet GL-AP1300 AC1300 Wireless Access Point 5

POWER SUPPLY OPTIONS

PoE (Power over Ethernet)

The PoE injector should be compatible with 48V 802.3at standard. PoE only works on the WAN port.

GL iNet GL-AP1300 AC1300 Wireless Access Point 6

This router does NOT work with 24V PoE injectors.

Power cable

GL iNet GL-AP1300 AC1300 Wireless Access Point 8Please use power cable 12V/2A DC.

SUPPORT

GL iNet GL-AP1300 AC1300 Wireless Access Point 8Repair/ Reset

If you cannot access the web-based setup page or cannot connect to the router, you can press the Reset button

  • Press and hold for 3 seconds, and then release to repair your netwo
  • Press and hold for 10 seconds, and then release to reset the router to factory settings. All user data will be cleared.
Technical Support

WARRANTY
 We provide one year limited warranty for routers and 3·month limited warranty for accessories. Extra warranty may apply according to the local law in which the product purchase took place.  Highly recommend using the included 12V/2A power adapter.  Any damage to the router caused by not following the instructions will render this warranty null and void. Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void. Issues caused by the use of third-party firmware may not get official support from us. Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void. Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice.

FCC ID: 2AFIW-AP1300

This device complies with Par1 15 of the FCC Rules. Operation is subject to the following two condi1ions. This devicemaynotcause harmful interference,and Changesor modifications not expresslyapprovedbythe partyresponsible forcompliancecouldYOid1he user’s authortty1o opera1ethe equipment.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pu1suant 10 par115 of the FCC Rules. These limits are designed to provide reasonableprotec1ion againstha11Tlfulintelference in a residentialinstalla1ion.Thisequipmentgenera1es usesandcan radiateradio flequency eneigy and, if not installed and used in accordance with 1he ins1ruc1ions, may cause harmful interference to radio communica1ions. However, there is no guarantee that interfeience will not occur in a par1icular installa1ion. If this equipment does cause harmful interfeience to radio or television reception, which can be determined by 1urning 1he equipment off and on, the user is encouraged to try to correct the in1elference by one or more of 1he following measures. Reorient or relocatethe receivingan1enna. Connect the equipment Into an outlet on a cl1cuJ1 different from that 10 which the receiver Is connected. Consult the dealer or an experienced radio/TV technician for help lmpo11an1 announcement. FCC Radiation

Exposure Statement
This equipment complies with FCC radia1ion exposure limits set follh for an uncontrolled envi,onment. This equipment should be installed and opeiated with minimum distance20cm between the radia1or and your body. This transmitter mustnotbe co-loca1ed or opeialing in conjunction withanyotherantennaor transmitter. The Equipment named above Is confirmed to comply with the requlremems se10111 In lhe European Council Directive on the Approximation of the Laws of 1he Membe1 Slates relating to RED (2014/53/EU). The equipment passed the 1estwhlchwas pelformedacco1dlng to the followlngEuropeanstandards: EN 301 489·1 V2.1.1; EN 301 489-17V3.1.1:

  • EN30489-52V1.1.0
  • EN 300328
  • EN 301 893V2.1.1
  • EN 62311:2018
  • EN62368-1:2014+A11:2017

Caution
Thedevicefo1 operatlon ln 1he band 5150-5250 MHzlsonlyfor lndoo1 useto reducethe potentlallo1 ha1mfullnte1ferenceto co-channelmobllesa1ellite sys1ems ;
This product uses WIFI 2.4GHz Opeiating Frequency Is 2400-2483.5MHz; 5GHz Operating Frequency Is 5150 – 5250MHz and 5725 – 5850MHz;
The ProduCI comply with Directive 2011/65/EU and IIS amendmentdlrectlve 2015/863/EU(Rohs2.0)

ShenthenOffice
ShenzhenGuanglianzhi1ongTechCo.,Lld.
Room 305 -306,SkyworthDigilalBuilding.ShiyanS1reet,
BaoanDistric1,Shenzhen,China,518000( +86-0755-86606126)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals