ASUS STRIX EVOLVE Optical Gaming Mouse User Guide

: June 7, 2024
: Asus

Table of Contents

Mouse features
Profile Switching
Package contents
System requirements
Switching the Top cover
Getting started
Notices
Canada, Industry Canada (IC) Notices
ASUS Recycling/Takeback Services
Documents / Resources

Quick Start Guide

Mouse features

ASUS STRIX EVOLVE -ASUS STRIX EVOLVE

Right-click button
Scroll wheel
DPI button
Left-click button
USB 2.0 connector
Programmable buttons
Magnets
Mouse feet
Optical sensor

Profile Switching

| Switch to Profile 1
---|---
| Switch to Profile 2
| Switch to Profile 3

Package contents

1 x STRIX Evolve Gaming Mouse
2 x Top cover sets (2 pcs / set)
2 x ROG logo stickers
User documentation

System requirements

Windows° 10/Windows° 8.1 /Windows° 7
100 MB of hard disk space (for optional software installation)
Internet connection (for downloading optional software)USB port

Switching the Top cover

You may switch the left or right Top cover to a preferred setup:

Pull the Top cover from the rear of the mouse to remove the top cover.
Attach the new Top cover from the front of the mouse, then push down until it is secured.

ASUS STRIX EVOLVE -TOP COVER

Getting started

To set up your STRIX Evolve Gaming Mouse:

Connect the USB cable to your computer’s USB port.
Download the driver from http://www.asus.com then install it on your computer.
For more programmable buttons, performance settings, lighting effects, download and install the ROG Armoury from www.asus.com.

Notices

Federal Communications Commission Statement

IMPORTANT! When you encounter a problem while updating the firmware, unplug the micro USB cable, then press and hold down the left, right, and scroll button on your mouse and replug the micro USB cable to restart the update.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION! The use of shielded cables for the connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Canada, avis d’Industrie Canada (IC)

Cet appareil numerique de classe B est conforme aux normes canadiennes ICES-003.

Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interference et (2) cet appareil doit accepter toute interference, notamment les interferences qui peuvent affecter son fonctionnement.

Proper disposal

| DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed-out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
---|---
| DO NOT throw the device in a fire. DO NOT short circuit the contacts.
DO NOT disassemble the device.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

Limitation of Liability

Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD- PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at htto://csr.asus.com/enalish/REACH.htm.

Korea Warning Statement

BSMI

VCCI: Japan Compliance Statement
VCCI Class B Statement

CE Mark Warning

English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of the EU declaration of conformity is available at: www.asus.com/support

Manufacturer	ASUSTek COMPUTER INC.
Address, City	4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN
Authorized Representative in Europe	ASUS COMPUTER GmbH
City Address	HARCOURT STR. 21-23, 40880 RATINGEN
Country	GERMANY