SUPER BRIGHT LEDS VIL Series VIL-40K9-5CS LED Vehicle Interior Lights User Manual
- June 6, 2024
- super bright leds
Table of Contents
User Manual
VIL Series
Important: Read all instructions prior to installation.
LED Vehicle Interior Lights
Safety and Notes
- To reduce the risk of electric shock, ensure that the battery/main power source is disconnected before performing any installation or wiring procedures.
- Avoid looking directly into the lamp when illuminated.
Specifications
Environmental Specifications
Input Voltage| 12–24 VDC
Operating Temperature| -40°–149° F (-40°–65° C)
IP Rating| IP67
Mounting Options
- Carefully remove the front cover using a small screwdriver.
- Use housing to mark mounting hole locations and drill holes.
- Connect wiring.
- Mount light.
- Reinstall the front cover.
Wiring and Use
VIL-40K5-6O, VIL-40K8-9O, and VIL-40K9-5C
- Positive (red) and negative (black) wires connect to supply power
- An external switch can be used for on/off functionality
VIL-40K5-6OT, VIL-40K8-9OT, and VIL-40K9-5CT
- Positive (red) and negative (black) wires connect to supply power
- Once connected to power, the internal blue LED of the touch switch will be on continuously
- Pressing the touch switch will toggle the light between on and off
- Holding the switch will adjust the brightness until the switch is released
VIL-40K9-5CS
- Positive (red) and negative (black) wires connect to supply power
- The light automatically turns on when motion is detected. When motion isn’t detected for 35 seconds, the light automatically turns off
- The sensor range is 16.4 ft (5 m) in a 120° angle
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>