WILTEC 61303 Air Sand Blaster Gun User Manual
- June 4, 2024
- wiltec
Table of Contents
WILTEC 61303 Air Sand Blaster Gun User Manual
Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating manual, nor
in the diagrams and illustrations shown. Although WilTec Wildanger Technik
GmbH has made every possible effort to ensure that this operating manual is
complete, accurate, and up-to-date, errors cannot be ruled out entirely. If
you have found an error or wish to suggest an improvement, we look forward to
hearing from you. Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249
Eschweiler Germany
E-mail: service@wiltec.info
Tel: +49 2403 555920
Fax: +49 2403 5559215
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Safety instructions
Protect yourself and others from dangers by taking appropriate precautionary measures and respect the following notes and instructions:
-
Ensure a correct operation.
-
Respect and obey the general precautionary measures and licensing requirements.
-
Only work in well-ventilated rooms.
-
During operation, always wear appropriate safety equipment (protective glasses, hearing and respiratory protection, gloves, etc.).
-
Do not operate this gun in areas exposed to explosion hazards.
-
Keep children and domestic animals away from your working area.
-
Never point the sand jet at other people or animals.
-
The sand blasting gun may only be used and maintained by trained persons.
-
Only qualified persons should perform repair works.
-
Do not modify the sand blasting gun in any way.
-
Before performing any maintenance or repair job, do disconnect the sand blasting gun from the pneumatic source.
-
Only use original spare parts.
-
If there is a malfunction or if the device is leaking, do disconnect the device from the pneumatic source immediately.
-
Never exceed the maximum operation pressure.
-
Only use compressed air to operate the gun. Do not use any gases.
-
The compressed air may only be connected via a quick coupling.
-
Do not spray acidic or basic liquids.
-
Do not use cleaning agents that might provoke an explosion, that can burn, or that are liquid.
Only dry-clean the gun. -
Only use appropriate materials and respect the legal regulations.
-
Do not use flammable materials.
-
The blasting agent must be collected. Dispose of the remaining material in an environmentally sound way.
Maintenance and care
- Always disconnect the device from its pneumatic source before performing any care or maintenance job.
- Thoroughly clean the sand blasting gun after use.
- Store the sand blasting gun in a dry room where the temperature cannot fall below 10 .
- Replace the nozzle as soon as it begins to wear out.
Troubleshooting Problem
Exploded view and parts list
Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH.
https://www.XPOtool.com The Tool Experts
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>