LEXONOSLODG Oslo Energy Wireless Charging Station and 5W Bluetooth Speaker User Manual

LEXONOSLODG Oslo Energy Wireless Charging Station and 5W Bluetooth

Speaker

Thank you for choosing our Oslo Energy+.
Before using the appliance, and to ensure the best use, carefully read these instructions. Keep this manual for future reference.
WARNING
To get your Lexon’s device properly operating, make sure to use a DC 9V-2A Power Adapter (not included or a Quick Charge 3.0 power adapter (not included).
Using a different charger or adapter with lower specifications than mentioned above, will significantly affect the wireless charging performance, the audio quality and may cause irreversible damages to your device.

PRODUCT OVERVIEW

1. Speaker
2. Button
3. Microphones
4. Wireless charging surface
5. Bluetooth® light indicator
6. USB type-C port
7. Wireless charging light indicator

FEATURES

• 10W wireless charger
• 5W Bluetooth® speaker
• Multi-device wireless compatible
• Dual microphone
• Optimized for conference calls
• Environmental noise cancellation

GETTING STARTED

1. Plug the provided USB Type-C cable into the charging port of Oslo Energy+.
2. Plug the USB end of the cable into any DC 9V-2A power adapter or a Quick Charge 3.0 USB power adapter.
3. Connect the power adapter to a power source.
   When the device is powered, the light indicator next to the charging port turns blue.

PAIRING INSTRUCTIONS

1. Long press the button to enter in pairing mode.
2. To notify you the speaker is in pairing mode, it will emit a sound and the blue light indicator will start flashing quickly.
3. Go in the Bluetooth® settings of your mobile device and ensure your Bluetooth® is switched on.
4. Scroll to other or new devices and look for your new Bluetooth® speaker’s LEXON OSLO ENERGY+.
5. Once it appears, tap it to connect. Your speaker will emit a confirmation sound as soon as it is paired.
   Once paired and connected, the Bluetooth® speaker will be automatically connected to the device whenever you turn the speaker on again, provided the device is in range.

Light status indicator

Operation mode Bluetooth® light
Power supply Steady Blue light
Enter in pairing mode (Long press the button) Blue light flashing and emits a sound
Power off (Long press the button) Steady Blue light and emits a sound
Bluetooth® device connected **** Blue light flashing slowly

If the light indicator does not work as described above, unplug the power adapter, and reconnect it.

Bluetooth Hands-Free operations

1. Answer a call: Press the button once
2. End a call: Press the button once
3. Reject a call: Press and hold the button for 2 seconds
4. Re-dialing: Under standby mode, short press the button twice for last number dialing While the Bluetooth® is in use, press the button to stop playing, and press again to continue playing.

How to pair with another mobile device?

1. Unpair or forget LEXON OSLO ENERGY+ from your current mobile device Bluetooth® settings first.
2. Perform a new pairing with another mobile device.

Light status indicator

Operation mode                                      Wireless charging light
Power supply Green light flashes twice and then goes out
On hold  Green light goes out
Start charging Green light on 10 seconds then goes out
Foreign object detected Red light flashing
Fully charged ** Steady Green light
**

If the light indicator does not work as described above, unplug the power adapter, and reconnect it.

SAFETY PRECAUTIONS

Read all the instructions before using the device:

1. Protect the speaker from near heat sources such as radiators, heaters, air ducts, sunlight.
2. Wireless charging may not work properly if you have attached a too thick case to your mobile phone. If your mobile phone case is thick, remove it before placing your mobile phone on the wireless charging surface.
3. Avoid contact with liquids: keep away from water and high moisture conditions.
4. No hitting the product severely, or insert any conductive objects into the speaker, or charging port during usage.
5. Do not put metal objects or magnets between the mobile phone and the wireless charging surface.
6. Do not repair the speaker by yourself. Seek for professional service.
7. Avoid getting shocked, do not touch the device with wet hands.

PRODUCT SPECIFICATIONS

Material: ABS / PU leather
Dimensions: Ø 12 x 2.5 cm / Ø 4.7 x 0.98” Weight: 292 gr / 0.64 lbs
Audio
Bluetooth® version: 4.2
Speaker unit: 1
Rated power: 5W
Signal & noise ratio: ≤ 85 dB
Frequency range: 160Hz – 18Khz Impedance: 4Ω
International warranty: 1 year

Wireless charge

Input: DC 9V-2A
Output power: 10W/7,5W/5W
Transmission distance: 3-6 mm
Working frequency: 110-205Khz & 2402~2480MHz RF output power:0.62dBm
Coil: 1 coil
Connection type: USB Type-C (cable included)

EUROPEAN UNION CE DIRECTIVE
LEXON hereby declares that the device is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU & 2011/65/EU.
The original EU declaration of conformity may be found at:
https://www.lexon-design.com/assets/certifications-ce-olsoenergyplus.pdf

USA – FCC STATEMENT

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Notice:
Any changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

RF exposure statements
This equipment complies with FCC radiation exposure requirement set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
   This Class B digital apparatus complies with Canadian ICES-003.

RF exposure statements
This device complies with the ISED RSS-102 RF exposure requirement set forth for an uncontrolled environment and are safe for intended operation as described in this manual.
Cet appareil est conforme aux exigences d’exposition RF de l’ISED RSS-102 définies pour un environnement non contrôlé et est sûr pour le fonctionnement prévu comme décrit dans ce manuel.

125, Avenue des Champs-Élysées – 75008 Paris – FRANCE
All brands or product names are or may be trademarks or their respective owners. Pictures and specifications are not contractual. Assembled in China.
lexon-design.com
@lexondesign

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>