LEXON LD147 DUO Mini Charger Instructions
- June 6, 2024
- LEXON
Table of Contents
LD147
DUO
MINI CHARGER
Design by Manuela Simonelli & Andrea Quaglio
PRODUCT OVERVIEW
- Built-in USB-A cable (1,2m / 47,2″)
- 2x Wireless charging surface (5W each)
- 2x LEDs indicator (charging status)
FEATURES
- Charge up to two Qi enabled smartphones and devices by simply setting them down.
- Advanced Qi wireless charging solution enables you to charge your device without plugging in a cable
- The Duo Mini Charger is Qi certified meaning any Qi compatible devices can charge on it.
COMPATIBILITY
Works with all Qi v1.2 and newer devices.
This includes iPhone 8 Plus and newer versions, all Qi certified android
phones and most Qi-enabled devices such as Lexon products (Mino+, Mina M, Mina
L and more).
GET STARTED
Charging your Qi-enabled device
Caution: Make sure to plug the USB plug into a Quick Charge 3.0 Certified
USB power adaptor or any power adaptor that delivers 10W or more (5V/2A,
9V/2A, 12V/1.5A).
Using a different power adaptor with lower specification than mentioned above,
will significantly affect the wireless charging performance and may cause
irreversible damage to your device.
- Connect the cable end into a quick charge 3.0 Certified USB power adaptor or any power adaptor that delivers 10W or more (5V/2A, 9V/2A, 12V/1.5A).
- Place the Qi-supported smartphone or device on wireless charging surface.
- Make sure the device is successfully charged. Then, remove the device once charging is completed.
| STATUS | LED |
|---|---|
| Power supply | Green light flashes twice and then turns off |
| Standby mode | Light Off |
| Charging | Green light flashes 15 seconds and then turns Off |
| Foreign object detected | Red light flashes |
Note: If the mobile device does not charge, ensure that the wireless charger is powered on and that the device is correctly positioned on the wireless charging surface. Make sure there is no metal or other foreign object between the device and the wireless charger. Then reposition the device again.
SAFETY PRECAUTIONS
Please read this important safety information before you use the device. It contains general safety information for devices and may include content that does not apply to your device. Follow the warning and caution information to prevent injury to yourself or others and to prevent damage to your device.
- Make sure to plug the USB plug into a QC 3.0 certified USB power adaptor or any power adaptor that delivers 10W or more (5V/2A, 9V/2A, 12V/1.5A).
- Do not touch the device, power cord or the electric socket with wet hands or other wet body parts
- Do not bend or damage the power cord
- Use manufacturer-approved chargers and supplies
- Do not drop or cause an impact to the charger or the device
- Protect the device, battery and charger from damage
- Do not store your device near or in heaters, microwaves, hot cooking equipment, or high-pressure containers
- Do not attempt to service, repair or disassemble the device by yourself.
- Do not put metal objects or magnets between the mobile phone and the wireless charger surface.
PRODUCT SPECIFICATIONS
Support: Qi enabled mobile devices
Material: ABS, Zinc Alloy & Silicone
Net Weight: 165 gr / 0.36 lb
Dimension: 14.0 x 6.8 x 0.85 cm / 5.51 x 2.67 x 0.33”
Frequency band: 110-205KHz
Input port: 5V/2A, 9V/2A or 12V/1.5A
Wireless charging output: 2x 5W
Wireless Charging: Qi-certified
Transmission distance: 2mm-6mm / 0.07-0.23”
USB cord length: 1.2m / 47,2”
Operating temperature: 0º C-35º C / 32°F – 95°F
International warranty: 1 year
EUROPEAN UNION
CE DIRECTIVE
LEXON hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of Directives 2014/53/EU &
2011/65/EU.
The original EU declaration of conformity may be found at:
https://www.lexon-design.com/assets/certifications-ce-duominicharger.pdf
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies : electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
USA – FCC STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice:
Any changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/ TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
125, Avenue des Champs-Elysées – 75008 Paris – FRANCE
All brands or product names are or may be trademarks or their respective owners. Pictures and specifications are not contractual. Assembled in China.
Documents / Resources
|
LEXON LD147 DUO Mini
Charger
[pdf] Instructions
LD147, 2ARD3-LD147, 2ARD3LD147, LD147, DUO Mini Charger
---|---
|
LEXON LD147 Duo Mini
Charger
[pdf] User Manual
LD147, Duo Mini Charger, LD147 Duo Mini Charger, Mini Charger, Charger
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>