LEXON LL141 Oslo Energy+ Wireless Charging Station User Manual
- June 6, 2024
- LEXON
Table of Contents
LEXON LL141 Oslo Energy+ Wireless Charging Station
Thank you for choosing our Oslo Energy+.
Before using the appliance, and to ensure the best use, carefully read these
instructions. Keep this manual for future reference.
WARNING
To get your Lexon’s device properly operating, make sure to use a DC 9V-2A
Power Adapter (not included) or a Quick Charge 3.0 power adapter (not
included).
Using a different charger or adapter with lower specification than mentioned
above, will significantly affect the wireless charging performance, the audio
quality and may cause irreversible damages to your device.
PRODUCT OVERVIEW
- Speaker
- Button
- Microphones
- Wireless charging surface
- Bluetooth® light indicator
- USB type-C port
- Wireless charging light indicator
FEATURES
- 10W Qi-certified wireless charger
- 5W Bluetooth® speaker
- Multi-device wireless compatible
- Dual microphone
- Optimized for conference calls
- Environmental noise cancellation
GETTING STARTED
- Plug the provided USB Type-C cable into the charging port of Oslo Energy+.
- Plug the USB end of the cable into any DC 9V-2A power adapter or a Quick Charge 3.0 USB power adapter.
- Connect the power adapter to a power source.
- When the device is powered, the light indicator next to the charging port turns blue.
PAIRING INSTRUCTIONS
- 10W Qi-certified wireless charger
- 5W Bluetooth® speaker
- Multi-device wireless compatible
- Dual microphone
- Optimized for conference calls
- Environmental noise cancellation
Once paired and connected, the Bluetooth® speaker will be automatically connected to the device whenever you turn the speaker on again, provided the device is in range.
| Operation mode | Bluetooth ® **light** |
|---|---|
| Power supply | Steady Blue light |
| Enter in pairing mode (Long press the button) | Blue light flashing and |
emits a sound
Power off (Long press the button)| Steady Blue light and emits a sound
Bluetooth ® **device connected**| Blue light flashing slowly
If the light indicator does not work as described above, unplug the power adapter, and reconnect it. Bluetooth Hands-Free operations
- Answer a call: Press the button once
- End a call: Press the button once
- Reject a call: Press and hold the button for 2 seconds
- Re-dialing: Under standby mode, short press the button twice for last number dialing While the Bluetooth® is in use, press the button to stop playing, and press again to continue playing.
How to pair with another mobile device
- Unpair or forget LEXON OSLO ENERGY+ from your current mobile device Bluetooth® settings first.
- Perform a new pairing with another mobile device.
WIRELESS CHARGING
Charging Qi-enabled mobile device
- M1ake sure to place a Qi-enabled mobile device on the wireless charging surface.
- When the mobile device is fully charged, make sure to remove it from the wireless charger surface.
| Operation mode | Wireless charging light |
|---|---|
| Power supply | Green light flashes twice and then goes out |
| On hold | Green light goes out |
| Start charging | Green light on 10 seconds then goes out |
| Foreign object detected | Red light flashing |
| Fully charged | Steady Green light |
SAFETY PRECAUTIONS
Read all the instructions before using the device:
- Protect the speaker from near heat sources such as radiators, heaters, air ducts, sunlight.
- Wireless charging may not work properly if you have attached a too thick case to your mobile phone. If your mobile phone case is thick, remove it before placing your mobile phone on the wireless charging surface.
- Avoid contact with liquids: keep away from water and high moisture conditions.
- No hitting the product severely, or inserting any conductive objects into the speaker, or charging port during usage.
- Do not put metal objects or magnets between the mobile phone and the wireless charging surface.
- Do not repair the speaker by yourself. Seek for professional service.
- . Avoid getting shocked, do not touch the device with wet hands.
PRODUCT SPECIFICATIONS
- Material: ABS / PU leather
- Dimensions: Ø 12 x 2.5 cm / Ø 4.7 x 0.98”
- Weight: 292 gr / 0.64 lbs
Audio
- Bluetooth® version: 5.0
- Bluetooth® range: 33 ft / 10m
- Speaker unit: 1
- Rated power: 5W
- Signal & noise ratio: ≤ 85 dB
- Frequency range: 160Hz – 18Khz
- Impedance: 4Ω
- International warranty: 1 year
Wireless charge
- Compatible with Qi-enabled devices Input: DC 9V-2A
- Output power: 10W/7,5W/5W
- Transmission distance: 3-6 mm
- Working frequency: 110-205Khz
- Coil: 1 coil
- Connection type: USB Type-C (cable included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>