MEEC TOOLS 009645 Pre Separator Hose Instruction Manual
- June 6, 2024
- MEEC TOOLS
Table of Contents
PRE-SEPARATOR
Item no. 009645
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)
Jula reserves the right to make changes.
For latest version of operating instructions, see
www.jula.com
JJULA AB, BOX 363, SE-532 24 SKARA
2022-01-28
© Jula AB
SAFETY INSTRUCTIONS
- Read the instructions carefully before use. Save them for future reference.
- This product can be used by children from eight years and upwards and by persons with physical, sensorial or mental disabilities, or persons who lack experience or knowledge if they are supervised or receive instructions concerning the use of the product. Cleaning and maintenance must not be carried out by children unless they are more than eight years old, and are kept under supervision. Keep the product and its power cord out of the reach of children under eight years of age. Vacuuming hot ash is dangerous and can damage the vacuum cleaner. Stir the ash with poker to make sure there are no hot embers.
- If hot ash is vacuumed by mistake, put the pre-separator outdoors immediately at a safe distance from flammable material.
- Make sure there is an empty bag in the vacuum cleaner before using the pre-separator.
NOTE:
Make sure that any ash is cool before vacuuming.
SYMBOLS
| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
TECHNICAL DATA
Hose length | 1m |
---|---|
Volume | 18 L |
Size | H 29 x Ø29 cm |
DESCRIPTION
1. Nozzle | 6. Dust extractor tube |
---|---|
2. Pre-separator hose | 7. Connection for vacuum cleaner hose |
3. lid | 8. Inlet connection |
4. Container | 9. End piece |
5. Clips | 10. Filter |
FIG. 1
ASSEMBLY
- Put the filter in the filter housing and click in place under the lid.
- Put the cover (3) on the container (4) and fasten it with the two clips (5).
- Fit the supplied hose (2) in the inlet (8).
- Fit the nozzle (1) on the other end of the hose (2).
- Put the vacuum cleaner hose in the connector (7) and make sure it is firmly in place.
- The pre-separator is now ready to use and the vacuum cleaner can be switched on.
NOTE:
Make sure that the filter is fitted correctly before using the pre-separator.
An incorrectly fitted filter can cause the vacuum deaner to be damaged and can
also invalidate the warranty.
USE
- In combination with most household vacuum cleaners the pre-separator is ideal for collecting up cold ash from fireplaces and stoves, sawdust, wooden chips and dust.
- Make sure the filter for the pre-separator is correctly fitted before use.
- After use, disconnect the hose and carefully tap any residue in the hose and nozzle into the container. Empty the contents of the container into a suitable rubbish bin.
- Do not use the pre-separator to vacuum split liquid.
MAINTENANCE
REPLACING THE FILTER
- When the suction power diminishes it is time to replace the filter. Undo the round, black filter housing on the underside of the lid, remove the used filter and fit a new filter underneath the lid.
- If the nozzle (1) gets clogged, switch off the vacuum cleaner and carefully tap the nozzle on a solid surface to remove the ash that has got stuck.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>