LK216 Magnetic Wireless Charger Pad Instruction Manual

LK216 Magnetic Wireless Charger Pad

MODEL: LK216

Manufacturer: Shenzhen Yaohui Technology Co., Ltd. Room 402, Building 8, Nanshan Yungu Phase II, Liuxian Avenue, Taoyuan Street, Nanshan District, Shenzhen

Input Output: Interface Type:

• 5V-2A 9V=2A 5W 7.5W Type-c

UKRP ANBOAREINFORMATIONLIMITED
(enquiries@amberinformation.com ANBER LG25 BELVEDERE HOUSE BASING MEW BASINGSTOKE

European Representative

• Name: eVatmaster Consulting GmbH Bettinastr.30
• Address: Frankfurt am Main,-Germany
• E-mail: contact@evatmaster.com
• Tel: 496995179070

Lifetime Warranty
For any dissatisfaction, please email us with your Order ID for quick ànd friendly support.
www.lk-direct.com www.facebook.com/kdirect88

Customer Service:
For NA: support-na@lk-direct.com
For EU: Support-eu@lk-direct.com
For JP: support-jp@lk-direct.com

CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical Electronic Equipment) This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should. contact either the retailer where they purchased this product. or their local government of details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modihcations not expressly approved by the party responsible for compliance could void the users authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 ot the FcC Rules. Tthese limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not OCcur in a particular installation,. f this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. This product is a stable and reliable cradle wireless charger. Compatible with Qi 5W protocol, compatible with Apple 7.5W protocol.

Caution .

• When using this product to charge other devices, please choose the appropriate adapter and data cable Itie anginal adapter and data cable are recommended).
• When charging cell phones or other wireless devices, the charging distance is recommended to be within 3mm, more than 3mm will lead to slow or no charging, etc.
• When using this product, make sure someone is present, and unplug it when you go out or leave it for a long time.
• When using this product, it is recommended to use it in an ambient temperature of O’C-45’C

Safety Warning

Improper use may lead to failure of the product function serious heat, or even fired In order to avoid harm to your person and property, please strictly follow the following requirements to store and use this product.

• Please be sure to use an adapter that meets local safety standards (such as China 3C certification) to charge this product to prevent electric shock or circuit damage. .When this product is charging a cell phone or other wireless device, it is strictly prohibited to place metal foreign objects, ID cards and bank cards between this wireless charger and the device being charged
• When this product is charging mobile phones or other wireless devices, it is strictly forbidden to place metal foreign objects, ID cards and bank cards between this wireless charger and the device to be charged, other wise, it will cause the functions of ID cards and bank cards to fail during use.
• The metal foreign objects will heat up and melt the product and the charged device, or even start a fire.
• Do not press or knock the product and avoid serious drops or strong shocks.
• If these conditions occur, or if liquid penetrates/spills into the product, which may cause circuit damage or short circuit, please stop using the product immediately and dispose of it properly. If the product bulges, deforms, or is deformed, stop using the product immediately and dispose of It properly.

Diagram

The Apple phone and wireless charger will be close to each other, it will be adsorbed together, and one end of the product will be connected to the adapter to charge the phone The Apple phone and wireless charger will be close to each other, it will be adsorbed together, and one end of the product will be connected to the adapter to charge the phone.

the holder support the product, the phone can be charged while playing

This product is a stable and reliable magnetic wireless charger. Compatible with Ql 5W protocol, compatible with Apple 7.5W protocol.

FQA:

1. Wireless Charger’s Compatible Phone Models
Only support iPhone 12 series and above models

2.If you’re failing to charge your device, please try out the following:

1. Please restart your cell phone and test with other USB cable.
2. Please check the Adapter is QC30/0C20 or not, Phone original adapter does not

1f you’re using the recommended wireless charger with the Qc3.0/QC: removed any potential charging obstructions, but are still experiencing i

1. Replacing the cable connecting the wireless charger.
2. Rebooting your phone.
3. Unplug the adapter and reinsert

4. Do you have to remove your phone from the case to charge it?
Please use the original magnetic Mag Safe charger case. Not compatible with other br Such as otter box defender cases.

5. Will this unit work attached to a car usb port?
Yes, the Magnetic Wireless Charger can work attached to a car USB-C/USB-A port.

Product specifications

• Product name  Magsafe wireless charger
• Model LK216
• Input 5V-2A 9V=2A
• Output 5W 7.5W
• Interface Type Type-C

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>