Business Heights Q3 Power Bank User Manual

Power Bank
User Manual

Please Read This User Manual Completely And Keep It Properly

Product Details

Specific Parameters

Name: Power Bank
Model: Q3
Material: ABS+PC
Weight: 30°70″100mm
Weight: 228g
Type-c input: :5V 3A 9V 2A 12V 1.5A
Lightning input: SV 3A 9V 2.2A
USB-A Output: 5V 3A 9V 2A 12V 1.5A 4.5V 5A 5V 4.5A
With charging line Output: 5V 2A 9V 2.22A 12V 1.5A
Wireless charging Output: 5W/7.5W/10W/15W Max
Executive Standard: GB/T 35590-2017

Note: When this product output 2 ports (includes Wireless Charging) at the same time, the Quick Charging mode (9V/12V) will be closed automatically and its output model covert to 5V (Wireless Charging will be 5W).

Parts List

Buttons function description

1. When the power bank in standby state, power on with click once (within 0.5s), the battery indicator will show the current remaining battery power status; If no other devices are detected after power on, it will automatically enter the standby state again after 30 seconds.
2. When the powder bank is on or in working condition, double click the button twice to turn off the power.

Battery indicator description

Click the button to check the remaining battery power.

| 0%-25%
---|---
| 25%-50%
| 50%-75%
| 75%-100%

Remarks:

• The continuously flashing 1 light is the alarm sign that means the power is lower than 5% and should charge it as soon as possible.
• The LED lights flash will incrementally one by one during charging. When it is full charged, 4 lights will keep light on at the same time, please unplug it.

Safety Warning

1. Before using the product, please read the instruction carefully, operating correctly according to the instruction.
2. Please do not disassemble the device by yourself, there are no any self-disassembly/maintenance parts.
3. The power supply has a conversion rate, so the battery capacity is not equal to the charging Capacity.
4. Please charge the power bank regularly, if not in use for a long time (it is recommended to charge it at least once every 3 months).
5. During the use of the electronic products, it will slightly heat up but not hot when working, which is a normal phenomenon.
6. Do not vigorously shake, knock or hit the product, if the product accidentally encountered a strong impact, strong extrusion and other circumstances resulting in shell deformation, bulge, etc., please stop using the product immediately.
7. In case of abnormal fever or other unknown hidden danger, please stop using this product immediately. In case of abnormal fever or other unknown hidden danger, please stop using this product immediately.
8. It is strictly forbidden to keep the product in contact with objects or heat sources above 55°C, put the product into fire or water, and charge the product in the environment below 0 °C.
9. In order to avoid the abnormality of this product, it is recommended to use the original charging line, adapter and power adapter.
10. Caring for the environment, it should be observed national environmental protection laws to deal with the waste power bank.

If in any incorrect use or warning notice against product instruction by consumers, Our company would not bear any legal responsibility for your personal and property damage.

This information is only for reference and does not constitute any form of commitment, please in kind prevail(including but not limited to color, size, etc.).

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

FCC Warning Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there 1s no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Please Read This User Manual Completely And Keep It Properly

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>