MEEC TOOLS 01568 50W 251 Min Battery Powered Submersible Pump Instruction Manual

Item No: 01568
50W 25l/ Min
Instruction Manual

BATTERY-POWERED SUBMERSIBLE PUMP
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)
Care for the environment!  Recycle discarded products in accordance with local regulations.
Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

JULA AB, BOX 363, SE-532 24 SKARA
2022-01-31
©Jula AB

EU DECLARATION OF CONFORMITY

Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer

BATTERY-POWERED SUBMERSIBLE PUMP
50W 25l/ Min
Instruction Manual

Conforms to the following directives, regulations, and standards.

Directive/Regulation
MD 2006/42/EC
EMC 2014/30/EU
RoHS 2011/65/EU + 2015/863
Harmonized standard
EN 60745-1:2009+A11, EN ISO 12100:2010
EN 55014-1:2006+A1+A2, EN 55014-2:2015
EN 50581:2012
This product was CE marked in a year:
Skara 2021-03-31

Mattias Lif
BUSINESS AREA MANAGER
(Signatory for Jula and authorized to compile the technical documentation.

SAFETY INSTRUCTIONS

• This product can be used by children from 8 years and upwards and by persons with physical, sensorial or mental disabilities, or persons who lack experience or knowledge if they are supervised or receive instructions concerning the safe use of the product and understand the risks involved with its use. Do not allow children to play with the product. Do not allow children to dean or maintain the product without supervision.
• Keep children under supervision to make sure they do not play with the product. Do not allow children to clean or maintain the product without supervision.
• Familiarise yourself with the controls on the product and how to use them. Read all the instructions and safety instructions before use. Failure to follow all the instructions and safety instructions can result in a risk of electric shock, serious personal injury and/or material damage.
• Contact the retailer or qualified personnel if you have any problems or questions.
• Store these instructions so that they are readily available for everyone who uses the product. These instructions should be enclosed with the product if it is sold or passed on.
• Do not make any modifications to the product. Only use accessories recommended by the manufacturer.
• The product must only be used for its intended purpose and in accordance with these instructions.
• The product must only be used for its intended purpose and in accordance with these instructions, otherwise, there is a risk of personal injury and/or material damage. The manufacturer cannot accept liability for personal injury and/or material damage resulting from improper use. A damaged cord or plug must be replaced by an authorized service center or qualified person to ensure safe use.
• Do not use the product if it is damaged. Always check the power cord, plug, and casing before use. If the product is damaged, or not working properly, it must be repaired or discarded. Pull out the plug immediately if the power cord or product gets damaged or stops working properly, otherwise, there is a risk of electric shock.
• Qualified personnel must carry out repairs. Imperfect repairs can result in a risk of electric shock, serious personal injury, and/or material damage.
• Do not pull the power cord to pull out the plug.
• Do not allow the power cord to hang over the edge of a table or worktop, or to come in contact with hot surfaces. Avoid kinking or bending the power cord. If an extension cord is used the cross-sectional area of the wires must be dimensioned for the power supply to the product. If the product is used outdoors, only use an extension cord approved for outdoor use.
• The product is not intended to transport water for human consumption.
• Do not use the product to transport corrosive, flammable, or explosive substances such as petrol or other petroleum products, nitrogenous liquids, grease, oil, saltwater or wastewater from toilets, or liquid that has a higher viscosity than water.
• The temperature of the pumped liquid must not exceed 35°C. Keep this product out of the reach of children. Do not use the product if there are any persons in the water.
• Make sure the product does not suck up aquatic animals, such as fish.
• Pay attention to the risk of contaminating the liquid as a result of leaking lubricant.
• Protect electrical connections from moisture.
• Do not expose the product to temperatures below 0°C. Make sure that the product is not run without liquid.
• Do not pump aggressive liquids or abrasive material.
• Do not pull the power cord or float switch cord to move the product, and do not use them to secure the product from moving. The product is only intended for household use and is not suitable for commercial purposes.
• The manufacturer cannot accept liability for personal injury or material damage resulting from improper use. Only use the supplied battery charger to charge the product battery. Do not attempt to charge other products or batteries with the charger. Do not attempt to charge the product battery with any other charger than the one supplied. Switch off the charger and pull out the plug when it is not in use. Do not subject the product to knocks, pressure or other mechanical stress. Do not expose the battery to extreme temperatures
• Store the product parts (pump, battery, and battery charger) in a clean, dry, and cool place indoors. Do not expose the battery or battery charger to moisture. Do not use the battery charger outdoors.
• Do not use, charge or store the battery at ambient temperatures below 10°C or above 45°C, this can damage the battery.
• WARNING: Never short-circuit the battery or expose it to moisture. When the battery is not in use keep it away from metal objects such as paperclips, coins, keys, nails, screws, and other small metal objects that can short circuit the terminals and cause a fire and/or explosion.

IMPORTANT: The product must be connected to the mains with a residual current device of a max of 30 mA.

SYMBOLS

| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded products in accordance with local regulations.

TECHNICAL DATA

Battery
Battery type: Lithium-ion
Battery voltage: 12 V DC
Battery capacity: 2.0 Ah
Charger
Rated voltage: 230 V ∼50 Hz
Output data: 13.5 V DC, 0.4 A
Safety class: II
Charging time: approx. 5-6
Nominal input power: 50 W
Run time per charging: approx. 30 min
Working pressure: 1.1 bar
Flow: 25 l/min
Lifting height: 11 m
Submersion depth: 0.5 m
Particle size: max 0,5 mm
Water temperature: max 35°C
Ambient temperature: max 40°C
Protection rating, control unit: IPX4
Protection rating, pump: IPX8
Connection: 3/4″
Tube diameter:  17 mm
Size: L20 x W86 x H7.9 cm
Weight: 1.03 Kg
Always Wear ear protection
The declared values for vibration and noise, which have been measured according to a standardized test method, can be used to compare different tools with each other and for a preliminary assessment of exposure. The measurement values have been determined in accordance with EN 150 3744:1995.

Warning: The actual vibration and noise level when using tools may differ from the specified maximum value, depending on how the tool is used and the material. It is, therefore, necessary to determine which safety precautions are required to protect the user, based on an estimate of exposure in actual operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the start-up time).

DESCRIPTION

This battery-powered pump is easily hung from the edge of the water barrel in the garden and helps to supply your garden hose with water. It has a telescopic tube with a quick-coupling. Because the pump runs on a battery you do not need access to a PowerPoint. Supplied with 2.0 Ah battery and charger. One charging provides approx. 30 minutes run time. The pump is intended to be used up to 2000 m above sea level.

PRODUCT PARTS

1. Power cord
2. Hook hanger
3. Clamp
4. Battery indicator
5. Power switch
6. Shut-off valve
7. Battery compartment
8. Battery
9. Coupling nut
10. Battery charger
11. Filter housing with inlet grille FIG. 1

INSTALLATION

1. Check before use that moving parts are correctly adjusted and can move freely, that no parts are incorrectly fitted or damaged and that no other factors can affect functionality. If the product is damaged it must be repaired before using it again.
2. Put the gasket on the pump housing and screw on the coupling nut.
3. Fasten the outlet hose (sold separately) in the quick-coupling on the shut-off valve.
4. If necessary, undo the telescopic nut and adjust the telescopic tube to the required length. Tighten the telescopic nut. FIG. 2

USE

INTENDED USE

• The product is a rainwater pump intended for pumping rainwater from a water barrel or tank for watering or draining purposes. Do not use the product for any other purpose than the one it is intended to be used for.
• Do not use the product to pump saltwater, corrosive liquids, flammable or explosive liquids (for example oil, petrol, paraffin or solvent), food, or wastewater from toilets.
• The product is only intended to be used for household use. It is not intended for industrial or commercial use.
• The product is not suitable for continuous use, for example as a circulation pump for ponds.
• Pay attention to the risk of contaminating the liquid as a result of leaking lubricant. Do not use the product in garden ponds that contain fish or valuable plants
• The product is only intended to be used in accordance with these instructions. All other use, for example pumping liquid other than clean water, overloading or force, modifications to the product or the use of other accessories than those recommended by the manufacturer is to be considered unsuitable. The manufacturer cannot assume liability for damage that occurs as a result of improper use.

BEFORE USING IT FOR THE FIRST TIME

Unpack the product and check that all the parts are included and undamaged. Keep the packaging material out of the reach of children’s risk of suffocation.

CHARGING THE BATTERY
Fully charge the battery before using it for the first time.

1. Connect the battery charger to a power point. The green status light goes on to show that the mains voltage is connected.

2. Conned the battery to the charger. The red status light goes on to show that the battery is charging.
   Warning
   Only use the supplied battery and charger for the product. Make sure to do the charging in a suitable place and to use the right charger. Never connect an unknown charger, or a charger, charging cord, or battery that can be suspected to be defective. Otherwise, there is a risk of overheating and in the worst-case fire.
   Do not leave the battery unattended when charging. See the website of the Swedish National Electrical Safety Board for further Information.

3. Charge the battery for about 8 hours the first time. it normally takes 5-6 hours for subsequent charging.

4. The status light stops flashing when the battery is fully charged.

5. After charging, first disconnect the battery charger from the battery cradle and then from the power point.

HOW TO USE

1. Place the product so that the pump is standing on a level surface in the water container from which water is to be pumped. Check that product stands firmly and cannot move when in use.
   — Do not exceed the maximum submersion depth. Check that the inlet opening (8) is not, or risks being blocked.
   — To reduce the risk of blocking the product can be placed on a brick, or something similar.

2. Layout the watering hose. Observe the maximum lifting height.

3. Open the shut-off valve. HG. 3

4. Put the battery in the battery compartment. Start the product by moving the power switch to me. To switch off the product, move the switch to O.

5. Remove the battery from the battery compartment when the product is not in use. Press the release button on the battery and pull out the battery from the battery compartment.
   — Make sure that no water or moisture gets into the control unit.
   — Make sure no particles larger than about 1 mm are sucked into the pump.
   — Never move the product by pulling the power cord
   — Never run the product without the pump housing full of water. FIG, 4

USING THE CUP

1. If necessary the product can be fastened to the rainwater barrel with the supplied clip.
2. Tighten the clamping screw with a 5 mm hex key. The clip prevents the product from tipping over. FIG. 5

BATTERY INDICATOR
The battery charging level is shown with the status lights as follows:

When the fot/ith (last) light goes off the pump stops. Switch off the product with t e power switch. Remove the battery and charge it with the battery charger.

MAINTENANCE

Cleaning, maintenance, storage, and transport
WARNING! Switch off the product, remove the battery and wait until all moving parts have completely stopped before adjusting and maintenance.
CLEANING
Clean the product by wiping it with a slightly damp cloth. Do not use sharp or metal utensils that can damage the surface. Do not use a strong or abrasive detergent that can damage the surface.
Filter
The product does not require any maintenance apart from external cleaning and cleaning the filter. To clean the filter, unscrew the filter cover anticlockwise. Clean the filter with clean water and replace it.FIG. 6
Note:
Sand, clay and other contaminants In the water can reduce the flow.
STORAGE
Store the product and all accessories in a dean, dry and frost-free place, and out of the reach of children.
REPAIRS
The product does not contain any parts that can be repaired by the user. Do not dismantle the product or attempt to repair it. Repairs should be carried out by an authorized service center.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>