Dongguan CX40G Wireless Mechanical Keyboard User Manual

Wireless mechanical keyboard
User Manual
CX40

CX40G Wireless Mechanical Keyboard

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Packing List

• Keyboard x l
• User Manual xl
• USB Receiver x 1
• Charging Cable x l

Instructions

2.4G Mode:

1. Switch on keyboard Press” “to switch it to 2.4G mode.
2. Take out USB receiver of keyboard’s back and plug it into computer. You can use the keyboard after the computer installs its drive automatically.

BTl Mode:

1. Switch on keyboard. Press “BT1″ keys to switch it to BT1” mode, and “BT1” key will flash slowly at this time.
2. Press BT]” keys for 3 seconds, and “BT]” key will flash quickly at this time, which means the keyboard is waiting for pairing.
3. Turn on the Bluetooth on your computer. Select “BT5.0 KB” to connect. You can use the keyboard after successful connection.

BT2Mode:
Please refer to the instructions in BT1 Mode

Features

1. Multi-mode Switch. The product supports 2.4G, BT1 and BT2 connection. It can be connected with and control 3 devices. User can switch modes via the corresponding mode switch button to control the corresponding device.
2. The keyboard supports dual system adaptation function: when the system switching switch is set to MAC, the keyboard is adapted to the Mac OS system, and when it is set to WIN, it is adapted to the windows system
3. The keyboard has 14 light modes which can be switched via FN+”Ins” keys.
4. Factory Reset: Press and hold FN+”Del” for 3 seconds to reset the keyboard to factory settings.
5. Win Lock; Press FN+”Win” to enable or disable the function of Win key and sleep key

Backlight Control Instruction

Independent Key Instruction

• Search
• switch between the default function and FN combined function
• Sleep

Solution to Keyboard’s 2.4G mode connection issue

1. Turn on the power switch and switch the keyboard to 2.4G mode.
2. Press” ” button for 3-5 seconds and release until the indicator of 2.4G mode flashes.
3. Plug the receiver into the computer. It is successfully connected when the indicator of 2.4G mode stops flash mg It can work then.

Solution to keyboard’s BTl mode connection issue

1. Clear the Bluetooth connection list of computer.
2. Turn on the power switch and switch it to BT1 mode.
3. Long press the button of BT1 mode for over 3s and release until its indicator light flashes.
4. Turn on the Bluetooth on your computer. Select “BT5.0 KB” to connect. You can use the keyboard after successful connection

BT2 Mode:
refer to BTl mode solutions.

Note:
If you encounter any product issue, you can contact our customer service for help.
(Email: csforcustomer@gmail.com)

Correct disposal of this product

(Waste Electrical & Electronic Equipment)
This Marking shown on the product or its literature, indicate that it should not be disposed – with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>