Kingband 3000LM Outdoor Solar Light User Manual
- June 17, 2024
- Kingband
Table of Contents
Kingband 3000LM Outdoor Solar Light
Information
INSTALLATION
Press the button on the back. Then choose a place that can get enough sunshine to install this solar lights. The longer it gets sunshine, the longer the lights can last.
- Install the bracket on the wall, the empty slot of the bracket should be up.
- After adjusting the angle, tighten the adjusting screw.
- Mount the lamp on the bracket slot.
- Connect the plug between the solar light and the solar panel.
- Turn on the switch.
- Blocking the solar panel with a night simulation test card to test for proper operation.
Solar panels should be placed perpendicular to the sun. Therefore, in the northern hemisphere – North America – the best orientation for solar panels is south. Choose a tilt between 30 and 45 degrees – it always works well in the USA. In winter you can change the angle to 70 degrees if you want to get more energy.
OPERATION GUIDE
- Because the solar light is charged during the day and only glows at night, then the nights imulation test card can simulate the night scene, if the light works normally, please remove the test card after the test.
- Simply connect the plug between the solar light and the solar panel, press the switch, and the solar light will start working.During the daytime, when you press the switch, the light will flash, indicating that the solar light is in charging state.At night, the light will turn on automatically.
- When there is light around the solar panel, the battery will be automatically converted to a charging state.If there is no light around the solar panel, it will automatically switch to motion detection mode.When the motion detection system detects the movement of nearby objects, the light automatically turns on for about 30 seconds, and then turns off.
- This type of automated logic is an energy-efficient solution that helps extend battery life.
- If the solar lights doesn’t light up during the day, please don’t worry, because it is charging, so as to better protect the battery.
- Please avoid shining other light directly on the solar panel at night. Otherwise, the light sensor will misjudge it as daytime and thus the light will not turn on. During the installation, please put the drainage port facing downward. This way the drainage port will automatically drain excess water from the lamp in rainy days. Sewage will automatically flow out from the light.
OPERATION GUIDE
- Please turn off the solar light and keep it charging under direct sunlight for 1-2 days for the first time use.
- Please extend the charging time in rain or snow weather to make sure the light has enough power.
- The default mode of the product is OFF mode and it can’t turn on when the light is detected, if you want to check if it can work, please turn it on by pressing the power button on the back and covering the solar panel with your hand or buckle it upside down on the desktop.
- If the lighting time shortens after the solar lights have worked for a period, check whether the solar panel is covered with dust and clean it regularly.
Contact
Designed and Manufactured By
- Huizhou Yuelai Technology Co., Ltd.
- PingShanJinGuangYanJiangBianDiDuan(D Dong , E Dong , G Dong ) 8HaoWuLou501, HuiDongXian, HuiZhouShi 516300
- Customer Service Email: support@kingband.online
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>