hama Wireless Charger QI-FC10S Instruction Manual

THE SMART SOLUTION

00188323
Wireless Charger
“QI-FC10S”
Operating Instructions

**A ![hama Wireless Charger QI-FC10S -fig 1](https://manuals.plus/wp- content/uploads/2021/10/hama-Wireless-Charger-QI-FC10S-fig-1.png) **| B ![hama Wireless Charger QI-FC10S -fig 2](https://manuals.plus/wp- content/uploads/2021/10/hama-Wireless-Charger-QI-FC10S-fig-2.png)
---|---

 Operating instruction

Controls and Displays

1. USB-C input
2. Status LED

LED function indicator

Power supply| Red –blue –violet
Standby| Constant red
Charging| Constant blue
End of charging| Constant violet (Samsung), constant blue (Apple)
Error message| Flashes red and blue alternately

Thank you for choosing the Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass  these operating instructions on to the new owner.

 Explanation of Warning Symbols and Notes

Risk of electric shock
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package Contents

• ‘QI-FC10S’ Wireless Charger for smartphones
• 1xUSB-C cable
• These operating instructions

 Safety Notes

• Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not use the product in areas where the use of electronic devices is not permitted.
• In order to prevent damage caused by overheating, make sure the product is not covered by textiles, metal, or other objects.
• Dispose of packaging material according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Use the product for its intended purpose only.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Keep this product, like all electrical products, out of the reach of children!
• Use the item only in moderate climatic conditions.
• Do not use the product in moist environments and avoid splashes.
• The product is intended for indoor use only.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, the adapter cable, or the mains cable are damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Do not put any bank cards or similar cards with magnetic strips, or other magnetically sensitive objects, on the product.
The data on the cards could be damaged or deleted.

Warning
Ensure that there are no metal parts (for example, metal plate for magnetic holder) on the back of your terminal device. Metal may heat up significantly in the field of the induction charger, causing damage to your terminal device and/or the charger.

 Getting Started and Operation

Warning

• Only operate the product from asocket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch –if this is not available, unplug the power cord from the socket.
• If using an amulti-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’smaximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power.

Note

• To be able to charge your terminal device using the wireless charger, your terminal device must be compatible with inductive charging technology. Please read the operating
  instructions of your device.

• Note that the presence of mobile phone cases, covers, or other materials between the wireless charger and the back of your terminal device can interfere with charging or even prevent it.

• Connect the included USB-C cable to the USB-C input (1)on the inductive charger and to a suitable USB charger. Please refer to the operating instructions for the USB charger.

Note

• The maximum charging power of up to10Wis achieved only with Qualcomm Quick Charge charger (9 V/1.67 A).
• The status LED (2)briefly lights up red, then blue, then violet to confirm an active power supply. Then theLED changes to red.

Warning
As a rule, do not use charging devices or USB connections that are defective, and do not try to repair them yourself.

• Put your terminal device on the inductive chargers (B) with the back to the charger.
• Charging starts as soon as an effective induction field has been generated. The status LED (2) is a constant blue. The current charging status appears on your terminal device.
• If no connection can be established through induction, you may have to change the position of your terminal device (B).
• Charging stops automatically once your device’s battery is fully charged. The status (2) is constantly lit violet (Samsung) or blue (Apple).
• Remove your terminal device from the inductive charger and disconnect the charger from the power supply.

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Note
Disconnect the device from the power supply before cleaning it or if it is not going to be used for a long period of time.

Warranty Disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com

Technical Data

Wireless Charger

Input| 5V 2A /9V1.67 A(QC)
Output (underoptimized conditions)| 5W /7.5 W/10W max.
Dimensions| 72 mm x110 mm x85mm
Connection| USB-C

 Recycling Information

Note on environmental protection:

After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices/Batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hereby, Hama GmbH &CoKGdeclares that the radio equipment type [00188323] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com->00188323->Downloads.

Hama GmbH & Co KG
86652 Monheim/ Germany
www.hama.com
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
00188323/09.20

References

• hama.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>