OLIGHT Arkfeld Pro 1300 Lumen EDC Light With UV And Laserpointer User Manual
- June 17, 2024
- OLIGHT
Table of Contents
Arkfeld Pro 1300 Lumen EDC Light With UV And Laserpointer
USER MANUAL
Three Light Sources Portable EDC Flashlight.
IN THE BOX
Table 1:
Specifications
*
Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for
reference.
Figure 1 Lock/Unlock
Figure 2 Charging Figure 3
Selector—Switch Mode:
OPERATE IN WHITE LIGHT MODE
Figure 4 ON/OFF
Figure 5 Moonlight
Figure 6 Turbo
Figure 7 Strobe
Figure 8 Change Brightness Level
Figure 9 Timed
shutdown
OPERATE IN
LASER MODE
Figure 10 ON/ OFF
Figure 11
Turn on the white light while the laser on
Figure 12
Turn off the white light while the laser on
Figure 13
When the laser and white light are turned on at the same time, change the
brightness of the white light
OPERATE IN UV MODE
Figure 14 ON/ OFF
Figure 15
Battery Level Indicator Display
* One red indicator (＜10%)
Multi-language dictionary, see Table 3;
1. Please refer to Table 1 and Table 2 for product specifications;
2. Lock/unlock, see Figure 1;
When the light is off, press and hold the button (about 2 seconds) until you
see moonlight mode, the laser (Laser mode), or UV light (UV mode) turn on and
then quickly off, the flashlight has then been locked out. When the light is
locked, press and hold the button (about 1 second) until the flashlight
activates moonlight mode, the laser, or UV light, the flashlight will then be
unlocked.
3. Charging, see Figure 2;
4. The selector switch mode, see Figure 3;
Rotate the selector clockwise to select white light mode; rotate the selector
counterclockwise to switch to UV mode; stop in the middle to switch to laser
mode.
5. In the white light mode, the center button operation guide:
5.1 Turn on/off the flashlight, see Figure 4;
Single press the button to turn on and off.
5.2 Moonlight, see Figure 5;
Press and hold for 1s when the light is off, the light will enter moonlight
mode.
5.3 TURBO, see Figure 6;
Quickly double press the button to enter Turbo.
5.4 Strobe, see Figure 7;
In the white light mode, press the button three times or more continuously to
enter the Strobe mode.
5.5 Change brightness level, see Figure 8;
While the flashlight is on, press and hold the button to cycle through the
brightness levels. The order of brightness is low, medium, then high.
5.6 Timed shutdown, see Figure 9;
When the light is on, double press and hold the switch to access the timer
settings. A single blink accesses the short timer while two blinks accesses
the long timer. The light will automatically turn off when the timer runs its
course.
6. Instructions for center button operation in laser mode:
6.1 Turn on/off the laser, see Figure 10；
Single press the button to turn on/off the laser.
6.2 When the laser is on, turn on the high brightness white light, see
Figure 11;
With the laser on, double press the center button to activate white light high
level.
6.3 When the laser is on, turn off the white light, see Figure 12;
When the laser and white light are on at the same time, double press to turn
off the white light, the laser will continue to illuminate;
6.4 When the laser and white light are turned on at the same time, change
the brightness of the white light, see Figure 13;
When the laser and white light are on at the same time, press and hold the
button to cycle through the brightness levels. The order of brightness is low,
medium, then high.
7. In UV mode, turn on/off the flashlight, see Figure 14;
Single press the button to turn on or off the UV light;
8. Battery level indicator display, see Figure 15;
Table 3
Multi-language dictionary
| Moonlight | Triple press |
|---|---|
| Low | Blink once |
| Medium | Blink twice |
| High | UV Light |
| Turbo | White Light |
| Strobe | Laser |
| Press | Selector |
| Double press | Mode change |
| Press and hold | Button Double press and hold |
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
MCC: One year.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an Authorized retailer or Olight itself.
USA Customer Support: [email protected]
Global Customer Support:
[email protected]
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd.
4th Floor, Building 4, Kegu Industrial Park, No 6
Zhongnan Road, Changan Town, Dongguan City,
Guangdong, China.
Made in China