Microphones K1 Indoor/Outdoor Wireless Microphone User Manual

: June 6, 2024
: Microphones

Table of Contents

Safety information
Outline picture (Note: The outline of the picture is subject to the
Indicator light description Microphone transmitter：
Charging
Technical specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User’s manual

Quick Operation Guide

Safety information

This device does not have a power adapter. When charging is required, please use a power adapter that has obtained the CCC certificate and complies with relevant standards.
Please use this equipment within the temperature range of 0℃-40℃, and store the equipment and accessories within the emperature range of -20℃- +45℃. When the
ambient temperature is too high or too low, it may cause equipment failure.
Do not expose the device to high temperatures or around heating devices, such as sunlight, eaters, microwave ovens, ovens or water heaters, etc.
When charging is complete or not charging, please disconnect the charger from the device and unplug the charger from the power socket.
The device is equipped with a non-removable built-in battery, please do not replace the battery yourself to avoid damage to the device.
Please dispose of this equipment, batteries, and related accessories in accordance with local regulations, and do not dispose of them as domestic waste.

Warning: The battery (battery pack or battery pack) must not be exposed to such as sunlight, fire or similar overheating environment；

Notice: If the battery is improperly replaced, there is a danger of explosion. Only the same type or equivalent type of battery can be used to replace it.

Wireless microphone transmitter…………….1pcs
Wireless microphone receiver…………………1pcs
User manual (including warranty card)…..1pcs
USB Charging cable……………………………1pcs

Outline picture (Note: The outline of the picture is subject to the

actual product!)

Function Description

Indicator light description Microphone transmitter：

Power-on but disconnected state: the red light and blue light on the front flash alternately；
Power-on and connected state: the blue light on the front is always on；
Low battery: red light flashes on the front；
Charging status: the front red light is always on; the front red light is off when fully charged；

Receiver：

Power-on but disconnected state: blue light flashes；
Power on and connected state: blue light is on. Instructions
（1）First, insert the USB plug of the receiver into the corresponding USB port of the mobile phone, and the blue light of the receiver indicator flashes at this time.

（2）Press and hold the power switch on the transmitter for 3 seconds, the microphone is turned on, and the blue light on the front is on at the same time, it means that the power is turned on and the connection is successful.

（3）At the same time, the blue light on the receiver is steady on, indicating that the connection is successfully paired, and the phone can use the microphone to receive the sound by turning on the camera, voice recorder, and live video APP.

Note: In order to ensure the effective use of the connection, there should be no obstacles between the microphone and the receiver. When wearing the microphone for recording or live video broadcasting, it is recommended to face the receiver, otherwise, the signal may be interrupted.

Charging

When the red light on the front of the microphone transmitter flickers, it is a low-power prompt for the device.
When charging, the front red light on the microphone transmitter will be on, and the front red light will go out when it is fully charged.
When the device is in use, when the battery of the mobile phone is low and needs to be charged, the mobile phone can be charged through the The USB interface of the receiver.Use the USB cable of the mobile phone charger to directly plug into the USB port of the receiver to charge the mobile phone；

Technical specifications

Dimensions	Transmitter 57×15×23MM（With back clip

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.