RODE MICROPHONES Procaster Broadcast-Quality Dynamic Microphone Instruction Manual

: June 13, 2024
: RODE MICROPHONES

Table of Contents

RODE MICROPHONES Procaster Broadcast-Quality Dynamic Microphone
Product Information
Product Usage Instructions
Introduction
Specifications
Features
Accessories
Using the Procaster
Warranty Information
Technical Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RODE MICROPHONES Procaster Broadcast-Quality Dynamic Microphone

Product Information

The Procaster is a dynamic cardioid microphone designed for professional audio recording. It has a frequency range of 75Hz to 18,000Hz and an output impedance of 320 ohms. The microphone features a 3-pin XLR balanced output connection and weighs 695g (1.53lbs).

Specifications

Acoustic Principle: Dynamic Cardioid
Polar Pattern: Cardioid
Frequency Range: 75Hz – 18,000Hz
Output Impedance: 320 ohms
Sensitivity: Not specified
Output Connection: 3-pin XLR balanced output (pin 2(+), pin
3(-), pin 1 (ground))
Net Weight: 695g (1.53lbs)

Features

Includes stand mount (RM2)
Includes zip pouch (ZP1)
Optional accessories: shock mount (PSM1) and studio arm (PSA1)
Online product registration required

Product Usage Instructions

To use the Procaster microphone, follow these steps:

Connect the Procaster to your audio recording device using a standard XLR cable. Ensure that the pins are correctly aligned (pin 2 to pin 2, pin 3 to pin 3, pin 1 to ground).
If desired, attach the included stand mount (RM2) to a microphone stand or boom arm.
If desired, place the Procaster into the included zip pouch (ZP1) for protection during storage or transportation.
Position the Procaster in front of the sound source, ensuring that the front of the microphone (marked with the Rode logo) is facing the source.
Adjust the microphone’s position and angle to achieve the desired sound pickup.
When finished, disconnect the Procaster from your audio recording device and store it in a safe place.

If you encounter any technical issues or have questions about the Procaster, please visit www.rode.com/support for information and technical support. The product is subject to terms and conditions, which can be found at www.rode.com/warranty.

Introduction

Thank you for investing in the RØDE Procaster broadcast quality dynamic microphone.
The Procaster has been designed as a no-compromise microphone for On-Air broadcast use.
Featuring a tight polar pattern and tailored for voice frequency response, the Procaster is perfect for every application where a great-sounding, rugged microphone with superior ambient noise rejection is demanded.
Please take the time to visit www.rode.com and register your microphone for a full ten-year warranty.
While there, you can view studio tips and techniques, as well as browse a comprehensive range of accessories for the Procaster and other RØDE microphones.

Peter Freedman
RØDE Microphones Sydney, Australia

Specifications

Acoustic Dynamic
Principle:
Polar Pattern: Cardioid (See graph)
Frequency Range: 75Hz ~ 18,000Hz (see graph)
Output Impedence: 320Ω
Sensitivity: -56dB ± 2 dB re 1V/Pa (1.6mV @ 94 dB SPL) @ 1 kHz
Output Connection: 3-pin XLR balanced output between pin 2(+), pin 3(-) and pin 1 (ground)
Net weight: 695g (1.53lbs)
Dimensions: Length: 214mm (8.425”)
Width: Ø53mm (2.086”)

Frequency Response

Polar Response

Features

Broadcast sound quality
High output dynamic capsule
Balanced, low impedance output
Internal shock mounting of capsule for low handling noise
Internal pop filter to reduce plosives
Robust, all-metal construction
Designed & manufactured in Australia
Full 10 year warranty*

Accessories

*Online product registration required.

Using the Procaster

The Procaster is a broadcast-grade end-address microphone, and for optimum results, you should address the microphone at a distance of no more than 5cm (2”).
The Procaster comes complete with a microphone stand mount (RM2) which should be used to attach the microphone to a good-quality stand.
The stand mount includes a thread adaptor allowing connection to either 3/8” or 5/8” stand threads.
Alternatively, the PSM1 shock mount and PSA1 studio boom arm are optionally available to isolate the microphone from external vibrations.
Always use a high-quality microphone cable and ensure that it is wired to Pin 1 shield, Pin 2 (+), and Pin 3 (-).
After use the Procaster should be wiped with a dry, soft cloth and placed in its protective zip pouch.
An absorbent crystal pack is supplied with the Procaster.
This should stay in the zip pouch at the head of the microphone when not in use to prevent any build-up of moisture. When the crystals turn pink, they can be dried out in an oven at 100 – 150 degrees Celsius for approximately ten minutes. Once they turn blue they can be reused.

Warranty Information

All RØDE microphones are warranted for one year from the date of purchase. A free ten-year extended warranty is available for the Procaster if you register it online at www.rode.com/warranty. *
The warranty covers parts and labor that may be required to repair the microphone during the warranty period. The warranty excludes defects caused by normal wear and tear, modification, shipping damage, or failure to use the microphone as per the instruction manual.
If you experience any problems or have any questions regarding your RØDE microphone, first contact the dealer who sold it to you. If the microphone requires a factory-authorized service, the return will be organized by that dealer.
We have an extensive distributor/dealer network, but if you have difficulty getting the advice or assistance you require, do not hesitate to contact us directly.

Technical Support

For information and technical support questions please visit www.rode.com/support
*subject to terms & conditions – see rode.com/warranty for full details