BISSELL™ air320 Air Purifier Sensor Cleaning | Support
- June 7, 2024
- Bissell
Table of Contents
Have you checked the filters & front cover of your machine for
Reduced/Loud Air Flow?
-
No > Go to Reduced/Loud Air Flow
-
Yes > Unplug machine
-
Remove the Fabric Front Cover
-
Open the Particle Sensor door located on the left side of machine
-
Remove the Sensor Screen and gently clean using a cotton swab
-
Gently pull the connected Particle Sensor from the machine – enough to access the back
- Clean the Particle Sensor (front and back) with a vacuum hose
- Vacuum inside the cavity to remove debris prior to reinstalling Sensor
-
Reinsert the Particle Sensor > Put the Sensor Screen in place
-
Reattach Sensor Door
-
Allow machine to run for 10 minutes to reset the Sensor for an accurate reading
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > please Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>