DPA MICROPHONES Micro Shotgun Microphone User Manual
- June 7, 2024
- DPA MICROPHONES
Table of Contents
4097 CORE
Micro Shotgun Microphone
User’s Manual
dpamicrophones.com/4097-shotgun
Introduction
With its small footprint and clear audio pick-up, the 4097 CORE Micro Shotgun
Microphone can be used in the tightest spaces. It is optimized to pick up
speech in applications such as in ENG/EFP broadcast or as a plant mic on film
sets.
The mic sits on a 10 cm (4 in) gooseneck with a built-in shock mount. A free-
running nut on the MicroDot enables the mic to be quickly turned and locked in
the correct position.
The microphone uses a small
diaphragm pre-polarized condenser capsule with a supercardioid pickup pattern
mounted in an interference tube, which sits inside of a replaceable foam
windscreen.
The interference tube in the 4097 CORE Micro Shotgun increases its
directionality while maintaining flat onaxis frequency response and consistent
off-axis response. This allows the mic to isolate what you’re trying to pick
up while attenuating sounds from the sides and rear.
Adapters for wireless
DPA Microphones’ ingenious adapter system is one of a kind in the industry. It
protects your investment in fantastic sound for years to come and works with
all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure,
Sony, Wisycom and many more.
Optional accessories
The 4097 CORE Micro Shotgun works with a variety of optional accessories to
increase its functionality. Not only can it be extended to double length using
a gooseneck extension, it works with all of our standard clips and mounting
options known from the 4099 Instrument Mic series, for example:
Specifications:
4097-DC-G-B00-010
4097 CORE Micro Shotgun Mic, Black MicroDot, 10 cm (4 in) full Gooseneck
Directional characteristics
Supercardioid
Frequency response
20 Hz – 20 kHz
Effective frequency range, ±2 dB, 20 cm (7.9 in)
80 Hz – 15 kHz with 2 dB soft boost at 10 – 12 kHz
Sensitivity, nominal ±3 dB at 1 kHz
16 mV/Pa; -36 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Distortion (THD) <1%
130 dB SPL RMS, 133 dB SPL peak
Dynamic range
Typ. 110 dB
Max. SPL, THD 10%
135 dB SPL peak
Connector
MicroDot
Color
Black
Dimensions
Weight: 10 g (.35 oz)
Microphone length: 10.4 cm (4 in)
Full specsheet at: dpamicrophones.com//4097-shotgun
Polar pattern
Frequency response
Measured at 20 cm (7.9 in)
Service & repair
If you are not satisfied with the characteristics exhibited by this product,
please go to dpamicrophones.com/service
for instructions.
Warranty
The 4097 CORE Micro Shotgun Microphone is covered by a two-year limited
warranty.
CE marking
This product conforms to all relevant directives approved by the European
Commission.
© May, 2020. DPA Microphones A/S Product features and specifications are
subject to change without further notice.
DPI-M-4097MS-01
Documents / Resources
| DPA
MICROPHONES Micro Shotgun
Microphone
[pdf] User Manual
Micro Shotgun Microphone, 4097 CORE
---|---
References
- DPA 4097 Micro Shotgun Microphone
- DPA 4097 Micro Shotgun Microphone
- Pro-audio condenser microphones - DPA Microphones
- Adapters for wireless mics with microdot termination
- Warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>