DEITY MICROPHONES SW24521 Pocket Wireless Mobile Kit Instruction Manual

: June 5, 2024
: DEITY MICROPHONES

Table of Contents

DEITY MICROPHONES SW24521 Pocket Wireless Mobile Kit
Instructions
FCC Compliance Statement
Item checklist
Nomenclature
Functions and Operations
Icon Description
Frequency Response
Specifications
Trademarks
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DEITY MICROPHONES SW24521 Pocket Wireless Mobile Kit

Instructions

Please read this product manual carefully.
Keep this product manual. Always include this product manual when passing the products on to third parties.
Heed all warnings and follow all instructions in this product manual.
Do not place the product near any corrosive chemicals. Corrosion may cause the product to malfunction.
Only use a microﬁber or dry cloth to clean the product.
Operate carefully to not cause any damage by dropping or physical shocking it.
Keep all liquids away from the product. Liquids entering the product can short-circuit the electronics or damage the mechanics.
Keep storing the product in a dry ,clean, dust-free environment.
Please have the product checked by the authorized service or agent if your product has some problems. Please note that this warranty does not apply to repair arising out of the malfunction of unauthorized disassembly, although you may request such repairs on a chargeable basis.
The product is certiﬁcated by RoHS, CE, FCC,KC, NBTC, NCC and Japan MIC. Please operate the product in compliance with the operation standards. Please note that this warranty does not apply to repair arising out of the
misuse, although you may request such repairs on a chargeable basis. The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design and speciﬁcations change.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Intended Use
Intended use of the Deity Pocket Wireless Mobile Kit includes:

The user has read the instructions of this manual.
The user is using the products within the operating conditions and limitations described in this product manual.
“Improper use” means using products other than as described in these instructions or under operating conditions that diﬀer from those described herein.

Item checklist

The package includes the following items:

Nomenclature

Transmitter (Pocket-TX)
Receiver (Pocket-RX)
Use of Tripod If you need to use the phone to make a video,settle the phone clip on the tripod, and ﬁx the pocket wireless device on the cold shoe mount for shooting. Pocket Wireless device works out of the box with Cameras, Recorders, Smartphones, Laptops,and Tablets that feature “Plug-in-Power”.

Functions and Operations

On/Oﬀ Button
Slide on/oﬀ the button to turn the Deity pocket wireless Transmitter or Receiver on and oﬀ.
Pair/Reset Button
Power on the device, short press the pair button of Transmitter and Receiver, The transmitter and receiver can be paired.

Pair LEDs slowly ﬂash indicate that the pair is not start or unsuccessful.
Pair LEDs quickly ﬂash indicate that the pair is on going.
Pair LEDs stay green indicate that pair is successful.If the pair matching is successful, you will not need to pair the device again when you use it. If the pair matching is successful， short press the pair button again, you can mute the microphone. And the power LED red light slowly ﬂash. Long press the pair/reset button >3S , the Pair/Reset LED goes out and then come back to normal indication, the system will reset successfully. Power on the device, after TX and RX paired, you can press the dB button on the receiver to increase or decrease microphone gain as needed (matches the Transmitter gain with the microphone’s output level, the user’s voice level and the position of the microphone). The adjustment range is from -3dB to +21dB in 3dB steps.Long press dB button, the OLED can turn around.

Firmware Update
You can update ﬁrmware via U disk(FAT16/32 USB ﬂash drive). When updating the ﬁrmware, please download the latest ﬁrmware to the root directory of U disk on the oﬃcial website, then use the “USB-C to USB-A Firmware Update Adapter”to connect the U disk to the USB Type-C input port . Power oﬀ the Pocket wireless Transmitter and Receiver, connect the U disk, then power on the device, power Led lights up,ﬁrmware update automatically.

When Firmware updating, the power LED will ﬂash .
When ﬁrmware updating successfully, the power LED stays green
When ﬁrmware updating unsuccessfully, the power LED stays red
After ﬁrmware update, pull out the USB and power oﬀ the device

Charging
The power LED glows green when the battery is good. The color changes to red when there is about 5 minutes of operation left. The battery is charged using the included Type-C charging cable connected to a DC adapter (Not included).

When charging, the power LED will ﬂash between red and green.
When full charged, the power LED stays green.

Icon Description

Frequency Response

Specifications

Pocket Wireless

Transmission Type| 2.4GHz
Range (Distance)| > 70 m
Transmitting Bitrate/Sampling| 24bit/48kHz
Recording Bitrate /Sampling| 0.96″ OLED Display
Battery Type| Lithium-ion Rechargeable Battery
Battery Capacity| Pocket-RX： 430mAh Pocket-TX： 400mAh
Battery Working Time| ~5Hrs @ 25mw RF Output
Battery Charger| USB Type-C Cable
Pocket-TX Input Connectors| 3.5mm Stereo TRS
Pocket-RX Output Connectors| Type-C
Pocket-RX Dimensions| 33.2 mm55.1mm20.1mm
Pocket-TX Dimensions| 33.2mm54.8mm20.1mm
Pocket-RX Net Weight| About31g
Pocket-TX Net Weight| About 31g
Temperature Range| –10 °C to +45 °C
Lavalier Microphone

Trademarks

Qualcomm is a trademark or registered trademark of Qualcomm in China or other countries. All other corporate and product names and trademarks mentioned in this manual are the property of their respective owners.