Aladdin CAPE-LITE Flexible 120W Bi Color LED Light User Manual
- June 3, 2024
- ALADDiN
Table of Contents
Aladdin CAPE-LITE Flexible 120W Bi-Color LED Light
START-UP GUIDE
| 1 | Switch between RGB and Bi-Color control |
|---|---|
| 2 | Dimming control |
| 3 | Color temperature control |
| 4 | Metal corner (can be attached to magnets) |
| 5 | Velcro |
| 6 | Input box |
| 7 | Metal ring for mounting (can be attached to magnets) |
Unpack your panel and accessories from the box. The panel features a built-in
dimmer unit which can be controlled on the back of the panel. Plug in your AC
adapter or D-Tap cable to the input box of the panel. If the cable is too
short, just use the included extension cable in between. When you connect the
AC adapter to the power outlet you’re ready to go.
If you have also purchased the optional DMX Attachment (ALL-DMXAT) or the
Wired Dimmer (ALL-WDIM) you can put them between the panel (or extension
cable) and the AC adapter (or D-Tap cable).
Just note that you need batteries that can handle the power draw of 140 watts
from the panel. There’s a simple calculation for that:
POWER DRAW (W) = MIN. WORKING CURRENT (A) = BATTERY VOLTAGE (V) 120 (W) = 8.1(A) 14.8 (V)
If you are using 14.8V batteries you need at least a working current of 8.1A.
If your battery is rated at 14.8V and 100Wh/6.8Ah with a working current over
8A you can run your CAPE-LITE for a little less than one hour. For any further
questions about using our products please refer to our customer service or
watch the instructional videos on www.aladdin-lights.com or YouTube.
DOWNLOAD THE APP
Using your CAPE-LITE panel with the new app for smartphones is a convenient
way of controlling your light. It is available as a free download on Android
and iOS. You can store your own color filters in the app by dialing the
desired Bi-Color values, having more control over the hues and saturation of
lighting effects, and much more. Give it a try and you will be amazed about
the convenience in your workflow. Find the QR codes for direct download below
.
iOSAndroid
Android
IMPORTANT CAUTIONS AND WARNINGS
- Do not use near flammables and heaters.
- Do not expose the unit to direct sunlight for a long period (this applies also for storing in a car).
- Do not use the dimmer wire or extension wire to hang or mount the panel.
- Do not bend or fold the panel more than 90 degrees.
- Do not tape directly on the LEDs of the panel – they can burn out.
- Do not damage the product with improper force or cause any impact with heavy objects.
- Do not cut the panel with sharp objects.
- Keep out of reach of children.
- The panel will heat up when running for a long period of time on 100% power, make sure to have it in your eyesight at all times. Use the X-BEND holder or frame to assure enough airflow for heat reduction.
- Use the product only within a temperature range of -10°C – +40°C.
- Make sure the panel has cooled down before storing it in the pouch or any other case.
- When you have technical problems while using the product, stop using it immediately and contact your dealer/reseller.
WARRANTY
We provide a one-year warranty period after the purchase. This warranty covers
repairs or a replacement for faulty products within this period. After this
warranty has expired, you can still get repairs for your product which will be
charged extra.
Aladdin Lights reserves the right to refuse warranty service on products under
disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below-listed causes, the warranty does not apply, even
if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to the usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
SELECTED OPTIONAL ACCESSORIES
- ALL-WDIM
- The ALL-IN series con-troller allows you more control over the RGB and Bi-Color values as well as effect values and DMX.
- EXCA5M
- Extend your light with the optional 5 meters of cable.
- ALL-DTAB
- Power your CAPE-LITE with external D-Tap power sources.
TECHNICAL SPECIFICATIONS
| Light source | 120W Bi-Color |
|---|---|
| CRI | Ra 97 |
| TLCI | 98 |
| Color temperature | 2900K – 6100K |
| Beam angle | 140° |
| Dimmer | Dimming: (1%–100%) |
| Cooling | Passive cooling |
| Dimmer input | 12V to 24VDC |
Power unit input
|
Automatic voltage 100V to 240VAC
Power consumption| 120W
Dimensions
| 1’700mm (W) x 320mm (H) x 18mm (D) (w/ built-in dimmer)
Weight| 830g
Connection| Bluetooth / Connector plug
Temperature range| -10°C – +40°C
DMX512 support| with optional DMX attachment / Controller
DMX512
|
2 Channels – White Bi-Color
IP-Rating
|
32
-
PICTURE BY ELIA QUADRI
Documents / Resources
|
Aladdin CAPE-LITE Flexible 120W Bi Color LED
Light
[pdf] User Manual
CAPE-LITE, Flexible 120W Bi Color LED Light, CAPE-LITE Flexible 120W Bi Color
LED Light, 120W Bi Color LED Light, Bi Color LED Light, LED Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>