Shenzhen Hongyuan Optical Communications Technology HYRGB500L LED String Lights Instruction Manual

Shenzhen Hongyuan Optical Communications Technology HYRGB500L LED String

Lights

Packing list

Please open the package carefully and check whether the following accessories are in the box.

1. LED twinkle light
2. The remote control
3. Power adapter

Install the lamp string

1. Pull out the string of lights, smooth side up, and thread it (from the top down) through the hole at the top of the tree.
2. Untie the adhesive tape, attach it vertically down to the Christmas tree, and evenly distribute it around the tree.

Begin to use

1. Download and install the application
   The Christmas lights can be connected to Bluetooth phones on Android and iOS platforms. Please scan the QR code below to download and install the App for your best experience.

2. Bluetooth connection lamp string

3. Plug in the USB power adapter. The light string will flash when the phone is powered on. Make sure that Bluetooth is enabled.

4. Open the APP and click search to enter the operation interface.

5. Definition of APP and remote control
   The intelligent lamp string has two control modes: infrared remote control and Bluetooth APP.

6. The APP will automatically recognize the phone language, and you can switch in ① when you need to switch.

7. ② Switch for the lamp string switch.

8. When button ③ is opened, the intelligent lamp string will be connected automatically next time.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses ,and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>