RODE MICROPHONES NTG-1 Carbon Fiber Mini Boom Pole Instruction Manual

: June 13, 2024
: RODE MICROPHONES

Table of Contents

RODE MICROPHONES NTG-1 Carbon Fiber Mini Boom Pole
Product Information
Product Usage Instructions
Introduction
Features
Dimensions
Additional RØDE Products and Accessories
Contact Details
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RODE MICROPHONES NTG-1 Carbon Fiber Mini Boom Pole

Product Information

The BoomPole is a versatile accessory designed to complement a wide range of (ENG) microphones and accessories. It is made from lightweight high-strength black anodized Aluminium for durability and portability. The BoomPole features telescopic sections that allow infinite adjustment. The standard BoomPole can be adjusted from 0.84m (33″) to 3.28m (10′ 9 1/8″), while the Mini BoomPole can be adjusted from 0.84m (33″) to 2.05m (81″). The quick release friction rings enable fast and secure adjustment of the individual tubes for precise positioning and application flexibility.

To enhance user grip and aid mobility, the bottom section of the BoomPole is covered with an expanded foam rubber tube that can be easily removed or replaced. The BoomPole comes with an industry standard 3/8 x 16 tpi threaded insert, allowing a wide selection of accessories to be securely attached. When used in conjunction with the 5/8 to 3/8 thread adaptor, the full range of accessories can be interchanged at will. The BoomPole is designed in Australia and is the perfect addition to complement the flexibility and utility of Video and Broadcast microphones.

Product Usage Instructions

Extend the BoomPole to the desired length by adjusting the telescopic sections.
Use the quick release friction rings to securely position the individual tubes for precise microphone placement.
If needed, remove or replace the foam rubber tube on the bottom section of the BoomPole for enhanced grip and mobility.
Attach accessories securely to the BoomPole using the industry standard 3/8 x 16 tpi threaded insert.
For additional compatibility, use the 5/8 to 3/8 thread adaptor to interchange accessories as needed.

Note: The BoomPole is not compatible with the Suspension Shock Mount – (Clamp Adaptor).

Introduction

The BoomPole is designed to complement the extensive range of Video, Broadcast and Electronic News Gathering (ENG) microphones and accessories. Made from lightweight high-strength black anodized Aluminium, the BoomPole’s telescopic sections allow infinite adjustment from 0.84m (33”) to 3.28m (10’ 9 1/8”) on the standard BoomPole or 0.84m (33”) to 2.05m (81”) on the Mini BoomPole. The quick release friction rings enable fast and secure adjustment of the individual tubes for precise positioning and application flexibility.

To enhance user grip and aid mobility the bottom section of the BoomPole is covered with an expanded foam rubber tube that can be easily removed or replaced. The BoomPole comes supplied with an industry standard 3/8” x 16 tpi threaded insert allowing a wide selection of accessories to be securely attached. When used in conjunction with the 5/8” to 3/8” thread adaptor the full range of accessories can be interchanged at will. Designed in Australia, the BoomPole is the perfect addition to complement the flexibility and utility of ’s extensive range of Video and Broadcast microphones.

High-strength Aluminium construction.
Black Anodized body
Quick release sleeves for precise and secure adjustment
Rubber grip.

Features

Telescopic construction, reduces to 0.84 meters in length for storage and transport.
Quickly extends to: Standard >3.2 metres (10’ 9 1/8”)
- Mini > 2.05 metres (6’ 9”)
Lightweight and ergonomically balanced for easy handling during mobile recording.
Suites all standard 3/8” mic clips.
Robust design suitable for rough use.