tp-link TL-WPA7617 AV1000 Gigabit Passthrough Powerline AC Wi-Fi Kit Installation Guide
- June 6, 2024
- tp-link
Table of Contents
tp-link TL-WPA7617 AV1000 Gigabit Passthrough Powerline AC Wi-Fi Kit
- TL-WPA7617 (European version) is used for demonstration in this guide.
- Images may differ from actual products.
-
Plug in the new extender near one of your existing powerline devices.
-
Check the new extender’s Powerline LED . Is it on?
yes > Step4
No > Step3 -
Pair the powerline devices.
-
Press the Pair button on the existing powerline device for 1 second. The Power LED starts blinking.
Note: If the Power LED does not blink, press the Pair button again. -
Within 2 minutes, press the Pair button on the new extender for 1 second. The Power LED starts blinking.
When the Powerline LED on the new extender turns on, the pairing process is complete.
-
-
Enjoy
Relocate the extender to the Wi-Fi “dead” zone. Connect your devices to the internet using the default SSIDs (network name) and password on the label at the side of the extender.
- Tip:
If you cannot find the SSIDs in your Wi-Fi network list, your new extender has automatically copied over the existing wireless settings. In this case, use the SSID and password of your existing powerline network to connect. If you want to unify your Wi-Fi networks, refer to the back page for instructions.
- Tip:
Attention
- Use the product only in the upright direction.
- Plug powerline devices into wall outlets instead of power strips.
Note: Using power strip will affect network performance or even cause connection drops.
Unify Your Wi-Fi Networks via One-Touch Wi-Fi Configuration
Copy SSID and password from your router via WPS to create one unified Wi-Fi
network throughout your home.
Note: If your router doesn’t have a WPS button, manually change the
extender’s Wi-Fi settings via the tpPLC app, tpPLC Utility, or web interface.
-
Plug in the extender in the same room as your router. Wait until the extender’s Wi-Fi LED turns on.
-
Press your router’s WPS button. Within 2 minutes, press the extender’s Wi-Fi button for 1 second. The extender’s Wi-Fi LED starts blinking. When it stays on, Wi-Fi settings are copied.
Note: If Wi-Fi settings are not copied within 2 minutes, manually change the extender’s Wi-Fi settings. -
Relocate the extender and enjoy the internet using your router’s SSID and password.
Auto-Sync Settings to More Extenders
If you have paired your powerline devices, the Wi-Fi settings will
automatically sync from the existing extender to the new one.
Note: For more extender models that support Wi-Fi Auto-Sync, visit
http://www.tp-link.com
If you personalize any extender with LED schedules or other Wi-Fi settings (such as Wi-Fi schedules and guest network), the settings will also automatically sync to other extenders in the secured powerline network.
Physical Appearance
Personalize Your Network
tpPLC App
For easy management via your smartphone or tablet, download the app from the
App Store or Google Play, or simply scan the QR code.
tpPLC Utility
For easy management via your computer, download the utility on the product’s
Support page at https://www.tp-link.com/support/download/.
Note: For detailed instructions, refer to the utility manual on the
product’s Support page.
Web Interface
To access all settings, connect to an extender wirelessly and visit
http://tplinkplc.net.
Note: For detailed instructions, refer to the product manual on the
product’s Support page.
Frequently Asked Questions
Q1. How do I reset my extender to factory default settings?
A1. Try another wall socket and make sure all powerline devices are on the
same electrical circuit.
A2. Try to set up a powerline network by pairing. Refer to the section above
for instructions.
A3. If the problem persists, contact our Technical Support.
Q3. What should I do if there is no internet connection in my powerline
network?
A1. Make sure all powerline devices are on the same electrical circuit.
A2. Make sure the Powerline LEDs are lit on all of your powerline devices. If
they are not, pair all devices
again.
A3. Make sure all devices are correctly and securely connected.
A4. Check if you have an internet connection by connecting the computer
directly to the modem or router.
Q4. What should I do if a successfully-paired extender does not reconnect after it is relocated?
A1. Make sure all powerline devices are on the same electrical circuit.
A2. Try to pair the extender again, and make sure the Powerline LED is on.
A3. Check for possible interference due to a washing machine, air conditioner
or other household appliances that may be too close to one of the powerline
devices. Plug the appliance into the integrated electrical socket to remove
the electrical noise if your powerline device has an integrated electrical
socket.
For technical support, replacement services, user guides, and other information, please visit
- https://www.tp-link.com/support, or simply scan the QR code.
- To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com.
- If you have any suggestions or needs for our product guides, you are welcome to email techwriter@tp-link.com.cn.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp- link.com/support/ukca TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp- link.com/en/support/ce/
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use the device where wireless devices are not allowed.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Plug the powerline devices directly into the wall outlets but not the power strips.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.