Microphones M2 USB Condenser Microphone for Live Recording User Manual
- June 6, 2024
- Microphones
Table of Contents
Microphones M2 USB Condenser Microphone for Live Recording
Product Overview
Wireless Bluetooth to play Accompaniment music
Bluetooth is automatically turned on after booting, turn on the phone’s Bluetooth, find M2 for matching
How to use
- Unscrew the knobs of both sides at anti-clockwise
- Adjust the microphone at your desired angle, then screw the knobs of both sides anti-clockwise to fix the microphone
- Plug the mini USB of the supplied cable into the USB port of the microphone, and connect the other plug into the available USB port of your computer.
Microphone knob
90″ Different Angle The microphone can be fine-tuned by fixing the knob Same Angle, front side recording effect is better
-
Unscrew the knobs: of both side anti-clock
-
Adjust the microphone at your desired angle, then screw the ~nobs of both sides at anti•dockwise to fix the microphone
Cardioid Pick-up Pattern
Plug the mini USB of the supplied cable into the USB port of the microphone and cone the other plug Into the available USB port of your computer.
Set Up for Windows 7
- Connect the microphone with a USB port on your computer using the supplied USB <Able.
- From the Setting, Manu· select the control Printer
- 4. Select sound
- Select “‘Speaker M2″ as the default device in the ” Sound. under playback” menu.
- Select “Microphone M2 as the default device in the Sound. under Recording'” menu.
Set Up for Windows 10
Setup for Apple System
NOTE
- Do not cover the microphone grille with your hand.
- Regular maintenance is recommended to avoid electricity erratic and acoustic problems.
- The well-made USB port would be tight, the initial a few times plug-in &off shall take a little bit.
- if you do not intend to use the conference microphone for a long period of time, please remove the US B cable
- .Do not touch the microphone while recording, as this will cause noise to be recorded.
- Do not let the microphone be close to high-voltage equipment or to devices that emit strong electrons.magnetic fields, otherwise, it may cause the noise to be recorded
- Do not use or leave the microphone in hot. humid places.
Specifications
Size:
SensitivitvRanae:
| 57°140mm
·43LldB RL:2.2K0Vs:l.SV ( IKHzOclB:IV/Pa)
---|---
Impedance;
Frequency:
Oitectivity.
| 2.2Kll
40·18000Hz
Cordioid (0. – 180, .@2S0HZ·5000HZ>!Oclb)
Cu rrent Consumption:| Max.0.SmA
Operation Voltage Range :| l.OV-lOV
Max. SoundPressure level:| 125dBS�L
S/NRa1io:| More than66d8
Sensitivity Reduction:| 3V�l.SV Sensitivity Variatron less than 3d8
Features
- Compatible with Windows and Mac computers, most Type·C devices
- Smooth and wide-spectrum response
- 2selectable polar patterns
- 16Bit/48kHz resolution
- Muting function
- 3.5mm headphone monitoring jack.
- integrated/8threaded hole
- Latency-free monitoring
- Includes 1.8m Type-C to USB CABLE
FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.