MEEC TOOLS 016850 Hose Retractor Instruction Manual
- June 6, 2024
- MEEC TOOLS
Table of Contents
**MEEC TOOLS 016850 Hose Retractor Instruction Manual
**
Important: Read the user instructions carefully before use. Save them for
future reference.
(Translation of the original instructions).
TECHNICAL DATA
Hose length: 15 m
Inner diameter: 3/8″
Quick-coupling: 1/4″ BSP
Material: Hybrid
Recommended working pressure: 10 bar
Max pressure: 13 bar
INSTALLATION
-
Install the product out of the reach of direct sunlight and heat. The product can be installed on a wall.
-
Screw the air hose onto the product.
USE
-
Pull the hose straight out from the reel, during which a clicking noise will be heard.
-
The hose can be pulled out to the required length as it clicks.
-
Rewind the hose by pulling it out a bit more until the clicking stops and then allow it to reel in. Keep hold of the hose. If the hose is released it can reel in very quickly and flap, which can cause personal injury and/or material damage.
NOTE:
The hose reels in more easily if it is not pressurised. Switch off the
compressor before reeling in the hose.
MAINTENANCE
- Clean the product with a damp cloth. Use a mild detergent. Never use solvents or corrosive chemicals.
- Never immerse the product in water or any other liquid.
- Wipe the hose before reeling it in if it is dirty.
- Do not use the product when it is very hot, or very cold.
Care for the environment
Recycle discarded product in accordance with local regulations.
Jula reserves the right to make changes. For latest version of operating instructions, see www.jula.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>