ONFORU MZT-FW01 Smart LED RGB Light User Manual

ONFORU MZT-FW01 Smart LED RGB Light

SAFETY INFORMATION

disconnect the power supply be-lore attempting any ‘1100< on the

• The 1ighrs hOO&alg cannot cedis., assembled at will. especially Ol.lring the use. there is a risk of electric snoek.
•  If you find that the housing of the adapter of the light.t is cracked. please oo n01 use it
• The housing of the light is made of plastic. ao no, wipe it vrilh strong detergents a.ncs other chemical cleaners when center).ning.
• page use our PO•er .xuapter anchor 01:ner accessories in the pa~ge. For other power adapters. tne just may not work or De damaged.
• Fire HazatCI-Do does not replace the power j».19. This plug contains a sale.y device (fuse) Y1Tliicn must not be removed. if the pO¥.•er plug is oam,aoed. please cascara this prodUC1.
• This I & not water. proof ana &hoUICI ce used for away from the humid environment. it cann01 ce used in or near water.

PARAMETER

:6:

‘

| RGB+Warm White+Oaylight White
•| Wi-Fi
a| -25°C • 40’C

COMPONENT

1.  smart LE.O Light
2. screws
3.  Plastic Expansion NailS
4. Angus! suppon
5.  tt.:1nging buckle
6.  3M .::idhesive
7. Base
8.  Adapter
9. 2 in 1 connection caD!

CONNECTION DIAGRAM

conne01 the LEO light to the 2 in 1 connection ca01e, ana then oo the power aa~er. Plugin the power cord and process the power oon: I switch to tum on/ off the LEO ~

PAIRING LED LIGHT WITH”SMART LIFE” App

Turn ONo’OFF me Smart LEO LlgM ten times until tile LE.O Light stans 10 f~ quick1y, which” dictates the scores.s of the fae1ory reset

“‘Siman ti1e · App lnstallalon.There ,l(@ 2 9ptions for 001ilining and i11Stallin9
the “Smart l.ife” App on ‘foam! smart device.

1. scan the OR come on the right.
2.  SNteh fot ·sman Lrle’ in the App Stote or Goog’e Play.

Enter the ·sman Life• App. , ma register an account .mo 109 in. If you already Move an aceooo1 for Smart Life App •• Please select “1..0g in with your existing account’.
Note: You will need yo;r “‘Sman li1e· App. username and password to pair with Amazon Alexa anellor Google Assistant

Please tum on the Wi-Fi aoa eruetoo1n before connecting LED lights to my smart Ute· APP. Tap the · +· button on the top right corner to aaa device. then ~ •righting de\lice· to enter the next page.
Note: This smart  LEO  Clln only supp011 2.4 GHz netwon< .ino cannot wof1< with s.o GHz network.. P!IN6e cnea< ii your home networ1< is 2.4 GHz and m<lke sure that your phone has been connected to your Wi-Fi ne-1wor1<. Please ensure your network. is not hidden.

How 10 pairs the LEO Ligh1.

1. PCW.’eron the LE.OLign.t
2. Poer off i11hree times qi.iclCty until the LEO clips fines, it kind: Cates that the f: good Light a.s entered p~ mode. s. Tap the oon1irmaion bu11on to pair me l.EO Ligni.
3. Enter Wi-Fi pa$SWOl’O t.o join your networK Please Note:
4. This smart LEO Lign1 can only support 2.4 GHz networks a..”I cannot v10(k wi1h s.o GHznetwOO<.
5. Please check if your nome oetwOO< is 2.4 OHZ and make sure that your phone as Deen connected 10 your wi-Fi network: Please ensure ~ network is not hidden. s. Wait til it is successfully connected

Note: to me, LEO Light is still f.Ja.Going until 1he progress rn.1P tNChes 100%, the pairing f.US. a.no you will need to repeat the previous 4 steps 10 pair me LEO Light.

Name the LEO light and mp You will find UW? advice you’ve n.amea is s.oown on the App homepage. Top the one-1ice 10 e-Mer the setting p., get. You can rt::HI control the light with Slnan Lile App. on this setting page➔

AMAZON ALEXA

Please make sure that your Alexa App. is connected to 10 Amazon Echo. and both wori< together successfully under your Wi-Fi network. Log in to your Alexa App at.the top-left comer. and tap ‘Skills

Type “Smart Lifekl search torsmart Life•. no, enable ·smart Ufe• on Alexa.

Enter your aocoun1 a:’KI in oi smart Li1e App •• TTIP ·Uni< No,,o. teen taAu1norize• on the next page authorizes Smart Lite Info 10 AleX<l. Note: same account and password as Smile Lile App.

Enter your aocoun1 a:’KI  oi smart Li1e App  ·Uni< No, tap • Au1norize• on the next page authorize SmartLite Info 10 AleX<l. Note: same account and password as Smile Lile App.

once your 5’nan l.ite account. is successfully connected to Afexa. 1he fol!a11ing page will pop ‘4). Tap ·oone• on the top left comer. 1hen t.ip “DISCOVER DEVICES” on the nex.1 pose.

W&it o few seconds for Afexa to de::ec11ne LED Ligm from smart Life App .. and you will fina the device named ·s~n LED Lignr has teen pa1reo to A’:exa App from serene, Life App. After step E is done. you can now control me ligh1 with A.’elro App. on this setting page. A. slioe 10 cnange bfqltness B.1ap to r…ern ontoff the light c. enter 10 c!’Lange

GOOGLE ASSISTANT APP

Open yow GOOC):e HOme App .• tap “Home control” on the t..eft ~ Bat pa..9e. Step

Tap “+· ounonon 1ne bonom ngnt corner 10 enter next page.
Fina •sman Ute• from the sf.de 00! list.

Enter your account ana paSS\\-Ottl of smart Life App., tap .. Linx N<Y1t•. then ta.p •Autnorize- on the next page 10 authorize your Smar1 Life Account only to Google Home • Enter your account and password of smart Life App., tap “Linx NoW’, then tap ·Authorize· on the next page to authorize your Sman Life Account Info to Google Home.Note: same account and password as smart

You w;u finCI that goog time has b.n:s the device named “‘Smart LEO Light” on this

Tty these comm.:inas and see what happens Dy

• ok, Goog1e. turn on .. device Mme”
• ok, Google. tum off “device n.:1me·
• ok. Google, settle “deVice name· 10 ·co: or-
• 01<. Google. set •Cle’Vice name· to “numcet·

For example: “ 01< ooog1e, turn on smart LEO Liger. ’01< Google. dim smart LEO Light ToSO’¼ .. etc.
Note: The device name is the one )’OU gi,-e to the LEO Light on sm,m Life App. 1n misuser guide. the de\lice it. the name “‘Sman LEO Ligt1

INSTALLATION STEPS

There are four methOd& 10 fixes little LEO ‘9nt The First Met!’IOO: Pass me connecting wire through the oose and SMP me wire into me two budues of the oase. tnen insen tne LED light in:o the oase. (A& snow in the picture on the rignt}

The Second Metht; id: PSa<:e the LED right on the angular support. (Foor 1ypes of placement ang1es. ; s snown,n the picture below)

Tile Third Me{hod: Fas1en the hanging buckle to the w aa with scores. then inser1 me LEO light in::o the hanging buckle; two methods Of fixing. vertical and horizontal, as snown in the pici\n below).
Tne Fourth MethOCI: Pa6-1e the SM adhesive on trie OOCI< to the light. then peel off the 3M aories.i\te and &tiCS< ii on u,e wall; (Two ang>es: vertical or norizonta1. as snown below} Note: Tne wall most reroofing d~ n ana f.Jat. free of dust. oil stains, w<lter ana owner of;ects affeO’ling one sticl<iness oi 3M. 01hel”‘A’i&e the LEO light WOUid not s1ick.

GENERAL MATTERS FOR ATTENTION

1. This smart LEO Light can only support a 2.4 GHz network and not work with an s .o GHz network. Please check if your nome network is 2.4 GHz and make sure that your phone has Deen connected to you.r wi-Fi networK Please ensure your net\\’011< is not Gideon.
2. If you fail to connect( the LEO Light with your Wi-Fi. please check whether your network is su1b(e and fast Slow networking speed may result:t in future of connection.
3.  you foil to connect to LEO Light with your Wi-Fi. please ensure your Wi-Fi password is correct if not please re-enter the correct password.
4. w i-Fi connection Issues II a rooter/Wt-Fi password changes to additional sman oevices register with the .. SMM Life~ App .• a factory reset ol the smart LEO Light is required.
5. MY mane,s regarding Smart LEO Light connection happens. you can test the
   factory setting o1 LE.D Light. men re-connect the smart LE.O Light.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>