Onforu SK03 Wireless Speaker Installation Guide
- June 5, 2024
- ONFORU
Table of Contents
A SPEAKER04
Onforu SK03 Wireless Speaker
INSTALLATION GUIDE
Thank you for buying this product. Please read all safety information and operation instruction before using the Bluetooth speaker.
SAFETY INFORMATION
- Read all instructions and save them for personal reference in the future.
- Follow all directions for operating the product.
- Do not set up near heat sources. Avoid radiators, stoves, and other devices that produce heat. Avoid long-term exposure to sunlight and high temperatures.
- There are 2 modes for this speaker: Bluetooth Mode, and Audio Mode.
- Please note: When the music is paused for 30 minutes, the speaker will enter into
- Sleep Mode. To restart the speaker, please press.
PACKAGE CONTENTS
Onforu SK03 X 1
Speaker Holder for Bicycles X 1
0.6m USB Charging Cable X 1
Speaker Clips X 1
1m Audio Cable X 1
DIMENSION
SPEAKER CONTROL PANEL AND PORTS
- Volume UP/Next: Long press the button to increase the volume. Short press the button to move to the next song(only functions in Bluetooth Mode).
- Volume Down/Prev: Long press the button to lower the volume. Short press the button to move to the previous song(only functions in Bluetooth Mode)
- Play/Pause/Pairing/Power On/Power Off: Long press for one second to turn on when the speaker is off, and long press for one second to turn off when the speaker is on; in Bluetooth connection state, short press the button to play/pause; double-press the button to forcibly disconnect the current connection and enter the Bluetooth pairing state.
- AUX Input Port
- Power Port: DC 5V 1A
- Indicator Light
- Microphone
PARAMETER
- Working Time: 10h battery life at 60% volume
- Stand-by Time: ≥300 hours
- Bluetooth Range: ≤10M
- Frequency: 20HZ-20KHZ
- Charging Lead Time: 2.5-3 hours
- Work Voltage: 5V / 1A
- Wattage: 5W
- IP Rating: IP65
- Battery Capacity: 1200 mAh
OPERATION INSTRUCTION
Step 1
Long press the, and the speaker will be turned on after hearing the prompt
tone. The power indicator light will turn blue and on for 3 seconds.
Afterward, the blue light flashes quickly, indicating the speaker is entering
Pairing mode.
Notice:
A. When the speaker is off, with no Audio cable connected, the speaker will
enter Bluetooth Mode directly after turning it on.
B. When the speaker is on, the speaker will enter the corresponding mode to
the last connected input(either Audio cable).
Step 2
Turn on the Bluetooth function on your phone or other Bluetooth devices and
search for our speaker which is named as A SPEAKER04. Connect with the
speaker.
- Search for A SPEAKER04 Speaker on your phone;
- Connect with A SPEAKER04 Speaker;
- Select playing music via A SPEAKER04 Speaker.
Step 3
After pairing successfully, there will be a prompt tone and the blue indicator
light will be on constantly.
Step 4
Play music on your phone. The blue indicator light will flash slowly when
playing music. and flash slowly when the music is paused.
Step 5
How to connect the speaker with a new device.
When the speaker is connected with a device, you can double press the
play/pause/pairing button to cut this current connection and enter pairing
status.
INSTALLATION OF THE HOLDER
Step 1
As picture 1 shows, pressing the bulge of the holder, take out the speaker
before installing the holder.
Step 2
As picture 2 shows, screw out the screws from the holder.
Step 3
Put the non-slip mat 1 into the ring of the holder, fix the holder onto the
bike through the ring, and tighten the holder with a screw that has been taken
out in step 2.
Note:
If the steering axle is too thin and can not be fixed with only 1 non-slip
mat, you can put mats 1 & 2 into the ring, pass the steering axle through the
ring, then tighten the holder with a screw.
If the holder is still loose, you can fold the non-slip mat 2, and put mat 1 &
folded mat 2 into the ring, pass the steering axle through the ring, then
tighten the holder with a screw.
Step 4
After installing the holder, you can push the speaker into the holder. Upon
hearing a click, the speaker is installed well.
CONNECTION MEMORY FUNCTION OF THE SPEAKER
The speaker will automatically connect to the last paired device, Therefore, please ensure the BT function of the device is on, after turning the speaker on.
TEL FUNCTION OF THE SPEAKER
Pick up Phone Call: When the speaker is connected to the phone, in case of a
coming call, you can pick up the call by short pressing the PLAY/PAUSE button.
Hang UP: When the speaker is connected with the phone, you can hang up by
short pressing the PLAY/PAUSE button.
Reject a Call: When the speaker is connected with the phone, you can reject a
call by long pressing the PLAY/PAUSE button.
AUX MODE
Insert 3.5MM LINE IN cable via the AUX port to swift to the AUX Mode.
In AUX Modes, when the music is playing, the blue indicator light will flash slowly, and in the mute mode, the blue indicator light will be on constantly.
Manufacturer / Hersteller:
Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si
Address: Qian wan Yi lu 1 hao A dong 201 shi Qian hai shen gang
he Zuo Qu Shen Zhen, Guang Dong, 518000, CN
support@onforuled.com
www.onforuleds.com
BellaCocool GmbH
PettenkoferstraBe 18, 10247, Berlin, Germany
support@onforuled.com
MDH LIGHTING LTD
UNIT G25 WATERFRONT STUDIOS 1 DOCK ROAD
LONDON UNITED KINGDOM E16 1AH
support@onforuled.com
Made in China
Documents / Resources
|
ONFORU Onforu SK03 Wireless
Speaker
[pdf] Installation Guide
Onforu SK03, Wireless Speaker, Onforu SK03 Wireless Speaker, Speaker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>