marta MT-IR1159A Steam Iron User Manual

marta MT-IR1159A Steam Iron

Product Information

Product Usage Instructions
CAUTION: Before using the appliance, please read the user manual carefully.

Setting Temperature
The iron has a temperature controller with different settings for various types of textiles. Refer to the label on the appliance to set the appropriate temperature for the type of textile you are ironing.

Anti-Calc System
The steam iron is equipped with a special filter inside the water reservoir that softens the water and prevents scale build-up on the soleplate. The filter is permanent and does not require replacement. Only use tap water with the iron. Using distilled water may alter the physicochemical characteristics of the anti-calc system and render it ineffective. Do not use chemical additives, scented substances, or decalcifiers.

Anti-Drip System
The iron has an anti-drip system that automatically stops steaming when the temperature is too low to prevent water from dripping out of the soleplate. This feature allows you to iron even the most delicate fabrics without any water leakage.

Filling the Water Tank
To fill the water tank, follow these steps:

1. If the iron has cooled down, place it in an upright position on It’s heel rest.
2. Plug in the iron and set the temperature to the maximum.
3. Allow the iron to heat for 2 minutes.
4. Unplug the iron from the power supply.

Cleaning
Refer to the user manual for detailed instructions on cleaning the steam iron.

Storage
After use, allow the iron to cool down completely. Store it in a safe and dry place.

Specifications

Lane 165, Rainbow North Street, Ningbo,
China
GBR| 230V ~ 50Hz| Cosmos Far View International Limited| Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo,
China
BLR| 230V ~ 50Hz| Cosmos Far View International Limited| Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo,
China

For more information, visit the official website: https://multimarta.com/Contact number: 8(812) 325-23-34

DESCRIPTION

Parts list

1. Soleplate
2. Water tank
3. Spray nozzle
4. Water filler
5. Steam controller and self-cleaning function
6. Steam button
7. Spray button
8. Handle
9. Cord protection
10. Light indicator
11. Temperature control

The real set of the appliance could be different from those listed in the User manual.

CAUTION
Read this manual carefully before using the appliance and save it for future reference.

• Before the first use, check the device specifications and the power supply in your network.
• It is not intended for industrial use.
• For indoor use only. Use only for domestic purposes according to the instruction manual.
• Do not use it with a damaged cord, plug, or other injuries.
• Keep the power cord away from sharp edges and hot surfaces.
• Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
• Never attempt to frame and repair the appliance by yourself. If you encounter problems, please contact the nearest customer service center.
• Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
• Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
• To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact the service center for inspection.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Place the steam iron on the ironing board carefully.
• Be careful not to touch metal parts of the working surface and water tank during operation.
• Avoid of ironing zippers, rivets, etc., as they can scratch the soleplate.
• Do not place steam iron on the metal or rough surface.
• Move the steam iron carefully to avoid burns, because there could be hot water leakage, as well as hot steam

USING THE APPLIANCE
SETTING TEMPERATURE

• Sort the fabric: wool with wool, cotton with cotton, etc. Start ironing the fabrics requiring the lowest temperature and progress to the higher ones, because the steam iron heats up quicker than it cools down.
• If the fabric consists of various kinds of fibers, start ironing the fabrics requiring the lowest temperature (e.g. article consisting of 60% polyester and 40% cotton should be ironed at the temperature indicated for polyester (•) and without steam.
• Turn the temperature control dial around until it is opposite the setting pointer

ANTI-CALC SYSTEM

A special filter inside the water reservoir softens the water and prevents scale build-up in the plate. The filter is permanent and does not need replacing.
NOTE: Use tap water only. Distilled water makes the anti-calc system ineffective by altering its physicochemical characteristics. Do not use chemical additives, scented substances or decalcifiers.

ANTI-DRIP SYSTEM
This iron is equipped with a drip-stop function: the iron automatically stops steaming when the temperature is too low to prevent water from dripping out of the soleplate. With the anti-dripping system, you can perfectly iron even the most delicate fabrics.

FILLING THE WATER TANK

• Unplug the steam iron before filling.
• Make sure that both the Steam Control turning Knob and Temperature Control Dial are in the “OFF” position.
• Hold the steam iron in the horizontal position.
• Slowly pour water into the water-fill opening with the help of a plastic beaker.
• Do not fill higher than indication “МАX” of the water tank, in order to avoid spilling out of water.
• If you have to refill while ironing, unplug the appliance from the power supply before filling.

EMPTYING THE WATER TANK
The water tank should be emptied after each use.

• Unplug the steam iron from the power supply.
• While the steam iron is still warm, hold the steam iron over a sink and allow the steam iron to drain by tipping the point of the steam iron down
• Gently shake the steam iron to loosen any water drops that may be trapped. The warmth of the iron should dry out any remaining water.

NOTE: If you empty the water tank after the steam iron has cooled down, set the steam iron in an upright position on its heel rest, plug it in, and set the temperature to the maximum, heat for 2 minutes. Unplug the steam iron from the power supply.

SPRAYING
As long as there is enough water in the water tank, you may use the spray button at any temperature setting either on steam or dry ironing. Press the spray button several times to activate the pump while you are ironing.

STEAM IRONING

• With the unit unplugged, fill the steam iron with water.
• Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug in.
• Set the temperature to the maximum.
• Switch on the steam control, setting the steam controller in the steam position
• When the light indicator is off, the steam iron has reached the desired temperature.
• When finished, unplug the appliance from the power supply.

CAUTION: Avoid coming in contact with escaping steam.

DRY IRONING

• The steam iron can be used on the dry setting with or without water in the water tank, however, it is best to avoid having the water tank too full of water while dry ironing.
• Set the steam control switch to the ‘0’’ position.
• Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug it in.
• Select the temperature best suited for the fabric to be ironed.
• When the light indicator is off, ironing may commence.
• When finished, unplug the appliance from the power supply.
  CAUTION: I f the steam iron has been used for a long time, is hot and there is no water, do not refill it with water until the steam iron has cooled down.

STEAM BURST
Make sure that there is enough water in the water tank.

• Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug it in.
• Set the maximum temperature.
• Set the steam controller to the off position.
• Press the steam button

CAUTION: Hold the steam button pressing not more than 5 seconds to avoid hot liquid leakage.

CLEANING

• Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled down.
• Clean the exterior with a damp cloth and wipe dry.
• Do not use abrasive cleaners.

SELF-CLEAN SYSTEM

• The self-cleaning feature cleans inside the soleplate, removing impurities. We recommend using it every 10-15 days.
• Set the steam control turning knob to position O (no steam)
• Fill the water tank to the maximum level.
• Set the temperature control dial to MAX and wait for the pilot light to turn off.
• Unplug your iron and hold it over a sink with the soleplate facing downwards when the temperature reaches max.
• Dial and hold the steam control dial to the self-clean position. Hot water and steam will be ejected from the holes in the soleplate along with any impurities
• Release the steam control dial after one minute or when the water tank is empty.
• When the soleplate has cooled down, you can clean it with a damp cloth.

STORAGE

• Unplug the steam iron from the power supply and allow it to cool down completely.
• Empty the water tank after each use, and then wrap the cord around the heel rest.
• To protect the soleplate, place the steam iron in an upright position on its heel rest.

SPECIFICATION

• Power supply: 230 V ~ 50 Hz
• Manufacturer: Cosmos Far View International Limited
• Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China

WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK COATING, RUBBER SEALS, ETC. )
The production date is available in the serial number located on the identification sticker on the gift box and or on the sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, and the 6th and 7th indicate the year of device production. The producer may change the complete set, appearance, country of manufacture, warranty, and technical characteristics of the model without notice. Please check when purchasing the device. Made in China

References

• Multimarta - интернет-магазин бытовой техники MARTA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>