ONFORU BDTYDA10BL Solar Powered Security Light User Guide

ONFORU BDTYDA10BL Solar Powered Security Light

SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

• This product is solar-powered. The solar panel should be installed in a position with direct sunlight for the longest time.
• This product is not a toy. Do not let children play with it as a toy.
• This product has not been used for a long time. When used again, it needs to be charged by sunlight before it can be used.
• Regularly wipe the surface of the solar panel with a dry towel. Dust and stains on the surface will affect the charging of the solar panel.
• This product has a built-in battery. Do not directly burn the damaged product with fire.
• This product is operated by a battery. Keep it away from high-temperature objects when using, especially the environments with temperatures higher than 85°C (185°F). Please do not use this product in a corrosive gas or humid environment.
• The motion light can be mounted Indoors, but the solar panel must be installed outdoors to receive light from the sun.
• To reduce the risk of strangulation, the flexible wiring connected to this luminaire shall be effectively fixed to the wall If the wiring Is within arm’s reach.
• Dispose of the lithium in the battery in accordance with local, state, and federal regulations.

COMPONENTS AND STRUCTURE

BDTYDA10BL

1. Cover
2. LED Light Source
3. Lamp Base
4. Motion Sensor
5. Cord length1.64 ft
6. Solar Panel
7. Cord length 16.4ft
8. Bracket

PARTS LIST

SPECIFICATIONS

PAIRING LED LIGHT WITH “Onforu” APP

Step 1: “Onforu Home” App Download
There are 2 options for obtaining and downloading the “Onforu Home” App on your smart device.

1. Scan the QR code on the right.
2. Search for “Onforu Home” in the App Store or Google Play.

Step2: Ent11rthe”OnloruHome” App.
Register an account and log in. lf you already have an ac:countlorOnloruHomeApp,pleaHsel9Ct’Log law existing account”.

Step 3: Please turn on the Bluetooth before connecting LED lights to the “Onforu Home” App.

Step 4: How to pair the LED Light

Set the light to the pending pairing state.

1. Power on the LED Light.
2. Tum the light on and off 3 times until it starts flashing, indicating that the light is ready for pairing.

Method 1

1. Tap the “+” button on the top right corner and tap “Add Device” to add a device.
2. The app will automatically search for the device. After discovering the device, tap “Add”.
3. Wait for the device to register (about 30-the 60s).
4. Tap “Next” to complete the light pairing.
5. You can tap to change the device name.
6. Tap “Done” to enter the control panel.

Method 2

1. Tap the “+” button on the top right corner and tap “Add Device” to add a device.
2. Tap “Lighting” and then “PIR Light(BLE)” to enter the next page.
3. Tap the “Next” button to pair the LED Light.
4. Wait for the device to register (about 30-the 60s).
5. Tap “Next” to complete the light pairing.
6. You can tap to change the device name.
7. Tap “Done” to enter the control panel.

HOW TO OPERATE THE APP

1. Color Temperature and Brightness Adjustment

2. Motion Sensing Settings

3. Sensing distance setting
   Low (13-26ft), Middle (26-49ft), and High (49-72ft).

4. Full light duration setting
   From 5s to 60mins.

5. Sensing records
   Here you can view your sensing records.

6. Dusk-to-Dawn Settings The sensitivity can be set to Day, Dusk, or Evening. Night and Dark, and the light will be on at the selected time.

7. Slight Bright Mode
   Here you can choose the slightly bright mode and its brightness.

8. Microlight duration setting
   Microlight duration can be set from 1min to 8hrs, or it can be set to be always on.

9. Timing Settings

PREPARATION

NOTE:
Before beginning the assembly of the product, make sure all parts are present. Compare parts with the parts list. f any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20-30 minutes.

TOOLS REQUIRED (not included)

INSTALLATION STEPS

Install the solar panel

NOTE: Make sure your solar panel is placed in a sunny location, and be aware of objects such as trees or overhangs from your property that may block the panel from receiving sunlight.

Loosen the screws counterclockwise and adjust the angle of the bracket.

Drill 2 holes in the selected mounting surface and fix the solar panel to the wall with the plastic expansion rubber plugs and screws.

NOTE: Please measure and determine the distance and size of the holes before drilling.

Adjust the position of the solar panel and tighten the screws clockwise.

Note:
Install the solar panel in the sunniest location, that is, the best place is facing south.

Install the light

Drill 2 holes in the wall and fix the metal plate to the wall with the plastic expansion tubes and screws.

Note:
Please measure and determine the distance and size of the holes before drilling.

Insert the long screw into the light base hole, and tighten the screw to the metal plate with a screwdriver to make sure the light is firmly fixed .

Connect the light and the solar panel
Connect the light and the solar panel, insert the male and female connectors with the arrows aligned as shown in the diagram, then tighten the waterproof cap.

NOTE: Inserting the connectors without the arrows aligned will burn out the light.

Note:
From time to time, make sure that the plug between the solar panel and the light is securely connected.

OPERATION INSTRUCTIONS

Detection Range: 180

NOTE:

1. The PIR sensor shall always be tilted slightly downward.
2. The orientation angle of the sensor shall be between 0-45°.

RECOMMENDED INSTALLATION HEIGHT: 6.5-13.1 feet above the ground

• When mounted 8ft above the ground and the sensor is oriented horizontally, the maximum sensing distance is about 72ft.
• When mounted 8t above the ground and the sensor is 45° down, the minimum sensing distance is about 19ft.

The sensor will be more sensitive to motion across the motion towards it directly.

FAQ

Where is the solar panel installed?
Install the solar panel in the sunniest location, that is, the best place is facing south.

Why can’t the solar panel be charged?

1. Ihe solar panel can charge the internal battery with direct or indirect light. Please adjust the solar panel installation position for the best charging effect.
2. It is advisable to adjust the angle of the solar panel to optimize exposure to the sun in Winter.
3. The solar panel should be cleaned with a damp cotton cloth on a regular basis, this will ensure optimal performance and better charging. Also, periodically use the same way to clean the lenses of the security light.
4. Make sure your solar panel is placed in a sunny location, and be aware of objects such as trees or overhangs from your property that may block the panel from receiving sunlight,

Why don’t the lights work?

1. Please make sure that the battery has enough power.
2. You can tum off the light, then let the solar panel charge for about 1-2 hours. Turn the light on again after the battery is fully charged, and it will work normally.
3. From time to time, ensure the plug between the solar panel and light is securely connected.

Can additional or extended cable wire for the solar panel be purchased?
No extension cords are available for purchase.

What type of batteries of this security light?
The battery type is 2pcs 3.7V 18650 1500mAh Lithium-ion rechargeable batteries.

FCC ID: 2A3W8BDTYDA1OBL

FCC STATEMENT WARNING

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:
His equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Manufacturer/Hersteller:

• Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si
• Address: Qian wan yilu 1 hao A dong 201 shi Qian hai shengang he zuoqu Shen Zhen, Guang Dong, 518000, CN
• support@onforuled.com www.onforuleds.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>