JTECH-SW4K-0301-S J-Tech Digital 3 Ports Ultra HD HDMI Switch Instruction Manual
- June 16, 2024
- J-TECH DIGITAL
Table of Contents
JTECH-SW4K-0301-S J-Tech Digital 3 Ports Ultra HD HDMI Switch Instruction Manual
Introduction
Dear customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
Our series of converters, switchers, extenders, matrixes and splitters are
designed to make your A/Y device use more convenient, more comfortable, more
productive and more cost-efficient.
The device can switch 3 HDMI Inputs to one HDMI Output, It can easily switch
three routes of HD Source to any one HD display or projector.
Our devices offer solutions for noise, space and security concerns, data
center control, information distribution, conference room presentation, school
and corporate training environments.
Feature :
- Three HDMI Inputs switch to one HDMI Output
- Support 4K
- Support Remote control and HDMI auto switch.
- LED Status Light shows clearly the working status.
- HDMI Input and Output distance can be up to 6m using the AWG26 standard HDMI Cable.
- Easy-Install
Accessories Content:
- Manual
- Remote
- IR Extender Cable
-
A : Standby and Start Button
-
B : Standby Status LED when light goes bright, the device goes to Standby Status.
-
C : HDMI Input Channel Switch Button
-
D : HDMI Input Channel Three LED Status Light
-
E : HDMI Input Channel Two LED Status Light
-
F : HDMI Input Channel One LED Status Light
-
G : HDMI Input channel audio switch LED Status Light, when Light goes bright, Auto Switch function turns on.
-
H : IR Extender cable Input port.
-
A: HDMI Output Port
-
B : HDMI Input One, Two, Three Port
Remote Button Function Showing
Standby and Start Button, when device is working normally, it will go to Standby status if you press the button and also the Standby Led Status Light will go bright; when press the button again, the device will back to normal working status and the Standby LED Light at device will also turn off.
IN1,lN2,lN3:HDMI Input Channel Switch Button. When you press the “IN1” Button, the device will goes to the matched input 1 channel.
Auto: HDMI Input Channel Auto Switch
Function On/Off Button, when you press the button, HDMI Input channel Auto
function on and the Auto LED Light at device will go bright; When press second
time, Auto function will turn off and Auto LED Light will turn off. When Auto
Function turns on, the device will jumps to the new connected input source.
Please make sure the input source you want has been started.
-
Please take out the film at the rear of the remote before use. please insert the film to remote rear if you do not use the remote for long time.
- To use HDMI Cable to connect the HD Source with the HDMI Input port of device.
- To use HDMI Cable to connect the HDMI Output port of device with the Display.
- button ” ” at remote or the button at device to turn on the device and turn off the device’
- Then press again the Switch Button at device or press the IN1’lN2’lN3 button at remote, it can choose the input channel that you want’
- you press the ‘AUTO” button, HDMI Input channel Auto function on and the Auto LED Light at device will 9o bright’ when. press second time or other button, Auio function will turn off and Auto LED Light will turn off.
- Note: This device gets the power from the HDMI Source and HDMI link. So*” special HD Source may have very small working current’ so it ;;t ;”i;”ply enough power to his device, if meet that situation’ please connect moi”ih.n one HD Sources to keep enough power to the device’
SPEC:
JTECH-SW4K-0301-S
Notes:
Please use the machine as the instruction listed to keep the long use lifetime
of the machine.
- The machine should be placed at the spot far from the Eamp, High- Temperature, Dusty, Erosive, and oxidative environment.
- All parts will be free from the strong shake, hit fall.
- Touching the power adaptor with the wet hands is prohibited.
- Please hold the power adaptor head and do not pull the power cord when cut off from the socket.
- Please turn the power off when the machine is not used for long time.
- Please do not open the cover and do not touch the inside parts.
- Please use the original factory power adaptor.
- It does not support the conversion between DM and HDMI signal Please use your signal source and display following the correct process.
Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>