ONFORU BDD50-3 LED Wall Lamp User Guide

June 5, 2024
ONFORU

**ONFORU BDD50-3 LED Wall Lamp User Guide

**

PARAMETER

PARAMETER

**** 311x138x130 mm / 12.24×5.43×5.12 in
**** 0.90 kg / 1.98 lb
**** 100-120V ~ 60Hz 220-240V ~ 50Hz
**** Daylight White 6000K
**** IP65
t a -25°C−40°C/-4°F−104°F
PF >0.9

Max Projected Area(the three lights on the same horizontal surface)

0.0228m²
Max. Lighting Coverage
80m²

Note:
The testing standard of the product’s luminous flux: Place the three lights on the same horizontal surface for testing, and the tested luminous flux is the accurate luminous flux.

COMPONENTS AND STRUCTURE

COMPONENTS AND STRUCTURE

  1. Cover
  2. LED Light Source
  3. Lamp Bracket

INSTALLATION STEPS

INSTALLATION STEPS
INSTALLATION STEPS
INSTALLATION STEPS

Note: For wet location, make sure fill full the gap of EVA gasket and mounting surface with sealing compound or silicon glue.

  1. Recommended to be installed on the ground above 2.5m (8.2 ft) and no higher than 5 m (16.4 ft)

  2. Do not connect this light fixture to an ungrounded electrical system.
    WARNING: Installing this light in an ungrounded electrical system may cause the metal parts of the light to carry current if any wires or wire connections are damaged or loose. In this case, anyone who touches the light will receive an electric shock, resulting in injury or death.

  3. Be sure to use wire nuts/connectors rated for the correct gauge and number of wires used.
    NOTE: Make sure there are no exposed wire bundles outside the wire nut/connector (if applicable).

  4. Be careful not to damage or cut the wire insulation (covering) during installation. Do not let the wires touch any sharp edges.

For US:
Connect the black line and white line of the light with the Live line and Neutral line of main supply respectively. Earth the green ground wire and then plug in the power supply.
Connect the black line

For EU :
Connect the brown line and blue line of the light with the Live line and Neutral line of main supply respectively. Earth the yellow-green ground wire and then plug in the power supply.
Connect the black line

Manufacturer:
Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si
Address: qian wan yi lu 1 hao A dong 201 shi qian hai shen gang he zuo qu Shen Zhen, Guang
Dong, 518000, CN
support@onforuled.com
www.onforuleds.com

EU REP MDH LIGHTING LTD
Suite 302, 292 Strovolos Avenue, 2048 Strovolos
Nicosia, Cyprus
support@onforuled.com

UK REP MDH LIGHTING LTD
69 Aberdeen Avenue, Cambridge CB2 8DL,
United Kingdom
support@onforuled.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals