DORMAN 635-518 Engine Rear Main Seal Cover Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 635-518 Engine Rear Main Seal Cover
Product Information
Specifications:
- Model: 635-518
- Type: Oil Seal
- Design: Reverse Lip Style
- Compatibility: Refer to the appropriate shop manual for vehicle
compatibility
Product Usage Instructions
Installation:
- Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part.
- If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician.
- Pay special attention to all cautions and warnings included in the shop manual.
- Notice the installation direction of the oil seal. The new design seal is a reverse lip style as opposed to the seal that comes off the vehicle.
- The new seal will appear to be installed backwards, compared o what comes off the vehicle.
FAQ (Frequently Asked Questions)
-
Q: Can I install the oil seal myself without a service manual?
A: It is recommended to refer to the appropriate shop manual for specific service procedures. If you lack the skill, it is best to seek the help of a qualified technician. -
Q: What should I do if the new seal looks like it is installed backwards?
A: The new design seal is a reverse lip style, so it may appear backwards compared to the old seal. Follow the instructions carefully for correct installation.
TECH NOTES: INSTALLATION
- ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
- General Motors 2017–1997, Isuzu 2016–03, Saab 2009–05, Workhorse 2012–04
IMPORTANT: Notice the installation direction of the oil seal. The new design seal is a reverse lip style as opposed to the seal that comes off the vehicle. The new seal will appear to be installed backwards, compared to what comes off the vehicle.
Disclaimer :
- Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National
- Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
- ©2018 Dorman Products, Inc.
- No reproductions in whole or in part without prior written approval.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>