AVA UNi-B Wireless Pen with Adjustable Stroke Instruction Manual

AVA UNi-B Wireless Pen with Adjustable Stroke

Machine List

1. Machine Cap
2. OLED Screen
3. Control Button
4. Continuously stroke
5. Grip Adjuster
6. Cartridge Needle
7. 18500 Battery
8. Battery Charger
9. Type-C Cable

Technical Data

• Model: UNi-B
• Material: Aircraft Aluminum
• Motor: AVA motor (Metal Brush DC Motor)
• Power intake: 5W
• Motor Speed: 10500(rpm)
• Storke: 2.5-4.5mm (continuously adjustable stroke)
• Needle Protrusion: 0-5mm
• Battery Type: 18500 Lithium-ion
• Battery Voltage: 3.7V
• Rated Capacity: 1600mAh
• Charging Input: 5V / 2A
• Diameter: 38mm
• Length: 128mm
• Weight: 190g (without battery)

Control Button

Turn ON/OFF & Pause

• Hold button for 1 second to turn ON.
• Press Button to switch between Work and Pause Mode
• Hold button for 2 seconds to turn OFF.

Add Button

• Press button increase the voltage by 0.1V
• Hold button increase the voltage by +1V

Dce Button

• Press button to decrease the voltage by 0.1V
• The hold button decreases the voltage by +1V
• Press and button for 3 seconds, hour meter will be reset to zero

OLED Screen

1. Power Indicator
2. Operate Time One hour and thirty-one minutes.
3. Working Voltage
4. Working Frequency
   • a. In working mode, displays working frequency”111 HZ”
   • b. In pause mode, displays “PAUSE”.

Color Screen

Continuously Stroke

Continuously Adjustable stroke from 2.5mm to 4.5mm

• Turning clockwise to decrease the stroke
  • Min:2.5MM
• Turning anticlockwise to increase stroke
  • Max:4.5MM

Needle Protrusion

• Turning clockwise to increase the needle protrusion length
• Turning anticlockwise to decrease the needle protrusion length

WARNING

BEFORE FIRST USE, CHARGE FOR A MINIMUM OF 3 CONSECUTIVE HOURS TO ENSURE THE MAXIMUM OUTPUT AND LIFE OF YOUR BATTERY. DO NOT DISASSEMBLE, PUNCTURE, CRUSH.HEAT OR BURN

• Protect the battery from heat ( such as from continuous sun exposure),fire and immersion into water. Do not store or operate the battery near hot or flammable objects. There is a risk of explosion.
• When not in use, keep the battery away from paper clips, coins, keys, nails, screws or any other small metal objects that cause the contacts to be bridged.
• A short circuit between the battery contacts may cause burns or result in a fire.
• Do not place the charging unit and the battery near flammable materials. only charge the battery in dry state and at a fireproof location. There is a risk of fire due to the heat that builds up white charging
• The battery must not be charged unsupervised

WARNING

Battery installation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>