In Common With 100005 Alien Orb Surface Mount User Guide

In Common With 100005 Alien Orb Surface Mount

Product Information

The Alien Orb Surface Mount is a lighting fixture manufactured by In Common With. It is designed to provide ambient lighting and can be mounted on a wall or ceiling. The fixture comes with various components, including a canopy backplate, thumb screws, a G9 lightbulb, an Orb 4s diffuser, and a hardware pack. The fixture is available in both plug-in and hardwired versions.

Product Usage Instructions

Hardwired Installation:

1. Before beginning installation, ensure the electrical power is turned off at the main fuse box or circuit panel.
2. Mount the canopy backplate to the junction box using a phillips head screwdriver to tighten the mounting screws.
3. Use the provided Wago clips to connect the fixture’s wires to the corresponding wires from the junction box. Make sure to match the colors: white for neutral, black for live, and green/yellow for ground. Use a wire stripper to remove 3/8 insulation from each wire before inserting them into the Wago clips if needed.
4. Align the holes of the backplate with the holes of the canopy cover and secure them in place by twisting the thumb screws by hand.
5. Push the included lightbulbs into the fixture sockets.
6. Align the threads of the Orb 4 Diffuser with the threaded socket and secure it by turning the thread of the diffuser into themetal hardware by rotating clockwise until fixed in place.
7. Turn on the power at the main fuse box or circuit panel to activate the light.

Plug-in Installation:

1. Mount the backplate to the wall using appropriate anchors for your wall material. If needed, consult a qualified professional for assistance.
2. Align the holes of the backplate with the holes of the canopy cover and secure them in place by twisting the thumb screws byhand.
3. Push the lightbulb into the socket.
4. Align the threads of the Orb 4 Diffuser with the threaded socket and secure it by turning the thread of the diffuser into the metal hardware by rotating clockwise until fixed in place.
5. Plug in the cord and turn on the light.

For any further questions or assistance, please contact In Common With support at support@incommonwith.com.

Thank you for choosing In Common With. Please confirm that you received all of the components pictured in this guide, and reach out to us if anything is missing. It’s rare, but it happens. We hope you enjoy your fixture. With proper care, it should last a lifetime. Have questions? Please contact us at support@incommonwith.com.

CAUTION!
Electrical shock risk. Turn off electrical power at the main fuse box or circuit panel before beginning installation, servicing the light, or installing accessories. We recommend working with a qualified electrician familiar with the type of work you’d like done.

Alien Orb Surface Mount Components

• Before beginning installation, turn off electrical power at the main fuse box or circuit panel
• Mount the canopy backplate to the junction box using a phillips head screwdriver to tighten the mounting screws.
• Use the wago clips to connect the fixture’s wires to the corresponding wires from the junction box in the wall or ceiling. White is neutral; Black is live; Green/ Yellow is ground. One ground wire will be from the fixture backplate, and the other ground wire should come from the junction box. If needed, use a wire stripper to remove3/8” insulation from each wire before inserting them into the corresponding wago clip.
• Align the holes of the backplate with the holes of the canopy cover. Secure them in place by twisting the thumbscrews by hand
• Push the included lightbulbs into the fixture sockets.
• Align the threads of the Orb 4 Diffuser with the threaded socket and secure it by turning the thread of the diffuser into the metal hardware by rotating clockwiseuntil fixed in place
• Turn the power back on at the main fuse box or circuit panel you disabled before installation. Turn on the light 🙂

Alien Orb Surface Mount, Plug-in Components

• Mount the Backplate to the wall using anchors appropriate for your wall material (not provided). Consult a qualified professional if needed.
• Align the holes of the backplate with the holes of the canopy cover. Secure them in place by twisting the thumbscrews by hand
• Push the lightbulb into the socket.
• Align the threads of the Orb 4 Diffuser with the threaded socket and secure it by turning the thread of the diffuser into the metal hardware by rotating clockwise until fixed in place.
• Plug in the cord and turn on the light.

Alien Orb Surface Mount, Slim Components

• Before beginning installation, turn off electrical power at the main fuse box or circuit panel.
• Mount the backplate to the junction box using a phillips head screwdriver to tighten the mounting screws
• Use the wago clips to connect the fixture’s wires to the corresponding wires from the junction box in the wall or ceiling. White is neutral; Black is live; Green/ Yellow is ground. One ground wire will be from the fixture backplate, and the other ground wire should come from the junction box. If needed, use a wire stripper to remove 3/8” insulation from each wire before inserting them into the corresponding wago clip.
• Align the holes of the backplate with the holes of the canopy cover. Secure them in place by tightening the canopy screws using the included L-shaped hex key.
• Push the included lightbulbs into the fixture sockets.
• Align the threads of the Orb 4 Diffuser with the threaded socket and secure it by turning the thread of the diffuser into the metal hardware by rotating clockwise until fixed in place.
• Turn the power back on at the main fuse box or circuit panel you disabled before installation. Turn on the light 🙂

Care Instructions

Never use scouring pads or abrasive cleaning solutions. If it comes in a bottle, it is bad for your fixture. Instead, we recommend using soft microfiber cloths, which are gentler on our products and the planet.

• For Metal: Wipe with a damp or dry microfiber cloth. Please note that our brass is unlaquered, and will darken naturally over time.
• For Glass: Wipe clear or colored glass with a damp microfiber cloth. For sandblasted or etched glass, use a dry microfiber cloth. Removable glass shades can be washed carefully in a sink using warm or hot water
• For Ceramic: Wipe with a damp microfiber cloth. Do not submerge in water.

Return Policy

We accept returns for store credit only, minus a 15% restocking fee. We do not accept returns on pieces from the Handmade, Disc, Terra, or Flora series, on the Ceramic or Chromatic Glass Up Down Sconces, or on items that are not in their original condition.Custom and Rush orders are final sale. Please note that shipping charges are non-refundable.To request a return, email sales@incommonwith.com within ten days of receiving your order. Requests must be approved before a return can be processed. Requests made after ten days will not be accepted. All products that come in their own box, includingbut not limited to light bulbs and accessories, must bereturned in their original, undamaged box as this is considered part of the product. Once installed, products are no longer eligible for return. We reserve the right to reject any returned items that do not meet the above requirements. If your return is rejected you will be notified via email.

• incommonwith.com.

References

• In Common With

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>